Get the Best Priced Chevrolet Equinox Wheel Hub

Research on Wheel Hub for Chevrolet Equinox

Today's automobiles have a single bearing and hub behind each wheel. Mechanical studs hold the wheels to the hubs, which are in turn mounted to the suspension and steering systems at the front end. In the back, they're attached to the rear axle. Wheel hubs are designed to last as long as the SUV, but there is no guarantee. Pot holes, collisions, and normal wear and tear can shorten the life of a part. As you cannot drive safely with a broken wheel hub, it must be replaced.

Symptoms Will Worsen as the Wheel Hub Wears

Damage to the wheel bearing, inside the hub, is often the cause for problems. You will start to hear a roaring sound from your Chevrolet Equinox all-wheel drive. The sound of metal-to-metal grinding is a sure sign of wear and there's not enough lubrication in the hub. A bearing could be misaligned or it may be cracked. It's usually too difficult to tell which bearing is making the noise, from inside the car. A mechanic has to check each one carefully to decide how to proceed, most often replacing the wheel hubs in pairs.

If your Chevrolet Equinox four wheel drive has a bad wheel hub, your steering wheel may vibrate. It might start to feel loose. Both of these problems tend to progress with acceleration. A loose wheel hub can hit the brake caliper on the road, creating a clicking sound. This tends to increase with acceleration. If your shop has the vehicle on the lift, the mechanic will first notice a lot of play in the tire and wheel assembly. A wobbly wheel is often found if the wheel hub is broken.

What Does a Wheel Bearing on a Car Do?

Each wheel bearing ensures the wheels/tires stay on the car. The wheels can spin freely thanks to the bearing. A normal wheel bearing also allows your vehicle to be safe and predictable to handle.

How Much Does It Cost to Replace a Wheel Bearing?

Variability in how much you'll spend on wheel bearings depends on many factors. With the Chevrolet Equinox all-wheel drive system in a 2010 vehicle, you might pay $694 to $1,104 for both sides in the rear; up to $575 for one side. One rear front-wheel drive bearing can cost close to $500 to replace, and both can cost over $900. Both front bearings may cost $586 to $966 to change. The replacement will correct Chevrolet Equinox problems associated with a bad bearing, but does include labor, as you don't only pay a mechanic just the cost of parts.

You Can Save Cash on Wheel Hubs

Just like you shopped around by reading Chevrolet Equinox reviews, wheel bearings are available from many retailers. Where you purchase them can mean a big difference in what you spend. At PartsGeek.com, you can save the most, because all of our automotive parts and accessories are sold exclusively online, reducing overhead. We're therefore able to pass on that savings to you, so wheel hubs can be obtained at more reasonable prices.