Get the Best Priced Chevrolet Camaro Water Pump

A Chevrolet Camaro water pump is a critical part of your vehicle's cooling system. The water pump is responsible for pushing the coolant through the engine block. It sits under the timing belt cover on the side of the engine. The pump is turned by the engine's drive belt turning. There are blades on the pump that are used to force the coolant into the engine and then back to the radiator to be cooled by air that is forced through the radiator. This process is repeated over and over as you drive down the street. Make sure to check if the temperature of that Chevy Camaro for sale as you test drive it and before you buy it.

Gaskets and Seals

The design of a 2010 Camaro water pump is with many gaskets and seals. Over time the gaskets and seals can become dry, brittle, or just break. If this happens you may experience a leak at the front of your engine just beneath the water pump. This will happen in the center of the motor's location. If this happens the coolant will leak out and your engine can overheat. A malfunctioning water pump must be fixed immediately to bring your Camaro back into the proper specs again. If you don't address this fast you can experience permanent motor damage or more LS3 water pump problems. Another indication can be that you hear a loud whining sound coming from the front part of your Camaro engine. This can be caused by a water belt that is worn or loose and from the bearings inside the water pump. If the bearings inside the pump wear out it is necessary to do a 98 Camaro V6 water pump replacement.

Watch the Temperature

If the water pump in your car fails completely then you will have an overheating situation in your vehicle. This can cause much damage in the engine from head gasket problems, burnt pistons, and even cracked cylinder heads. If this is the case your Camaro will not perform like you expect it to. If you see steam coming from the front area around your radiator, then this is a definite sign of your engine overheating and often a sign that your water pump is not circulating the coolant properly or not at all. Don't drive your car if you experience this. Do an LS1 high flow water pump replacement so you don't cause much more costly repairs.

The Pump Costs

You can choose to have a local repair shop replace your water pump. This process will cost between $458-$665 for your 2012 Camaro. If you have the time you can do the work yourself and save the money on the labor. The internet will have some videos describing the replacement to help you. The parts are easy to get. You can shop PartsGeek.com to get the best water pump replacement cost or the best Camaro water pump price. With us, you are likely to find the best deals on parts and accessories for your Chevy Camaro. We are an online auto parts outlet with a very low overhead and for you that equals savings.