Get the Best Priced Porsche 911 Turn Signal Switch

Research on Turn Signal Switch for Porsche 911

Your Porsche 911 Turn Signal Switch performs several functions, both electrical and mechanical while indicating the vehicle to turn. Electronically, it signals the turn signal flasher to flash either to the right or to the left, both front and rear. Mechanically, it maintains the turn signal flasher function until the steering wheel is reversed from the turn direction that it was selected. For example, if a left turn left signal is selected, then your Porsche 911 Turn Signal Switch will maintain flashing left turn until the steering wheel is turned to a certain amount clockwise., then turned clockwise back to a straight ahead or centered position. The same is true for a right turn; the flashing turn signal is then canceled. One of the most frequently used electrical components on a vehicle is your Porsche 911 Turn Signal Switch, and in case it fails, it will usually produce a few symptoms that will alert the driver it needs attention.

Signs your Porsche 911 Turn Signal Switch is failing

In case your Porsche 911 Turn Signal Switch continues to blink when the steering wheel returns to the center, it normally reflects a failure of the mechanical portion of your Porsche 911 Turn Signal Switch. Unfortunately, we have all seen drivers cruising down the street with their turn signal still on. Another symptom of a failing Porsche 911 Turn Signal Switch, is when your turn signal lights-out continue flashing unless the turn signal lever is held down. Similarly to this kind of symptom, it will also reflect a failure of the mechanical portion of the switch. Correction to this problem is normally best done by a professional mechanic. Another symptom if is the left or right turn signals or the hazard warning lights are not working properly. Your hazard warning flashers and the turn signal flasher functions are normally built into a single, integrated electrical unit, potentially affecting both the turn signal and hazard flasher function at the same time. A professional mechanic can confirm the hazard flasher failure, and replace the flasher unit in case this component is failing. Your Porsche 911 Turn Signal Switch is a very important component in your vehicle, it aids other drivers on the road to know your directional decisions, and also alerts pedestrians of your next move. Driving with a faulty Porsche 911 Turn Signal Switch could pose a serious risk to both drivers and pedestrians as well. It's important to contact your mechanic in case you notice any of the above-mentioned problems.

Porsche 911 Turn Signal Switch Cost

The average cost of a Porsche 911 Turn Signal Switch replacement is between $140 and $269. The labor costs are estimated between $20 and $40. It's advisable to get a personalized quote that is based on your location, the make model and year of your vehicle. When it comes to replacing your Porsche 911 Turn Signal Switch, it's recommended that you get it from a reliable online retailer such as PartsGeek.com. We sell Porsche 911 auto parts and accessories at reliable prices.

Turn Signal Switches available for the following Porsche 911 years: 2019, 2018, 2017, 2016, 2013, 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1994, 1993, 1992, 1991, 1990, 1989, 1988, 1987, 1986, 1985, 1984, 1983, 1982, 1981, 1980, 1979, 1978, 1977, 1976, 19, 18, 17, 16, 13, 12, 11, 10, 09, 08, 07, 06, 05, 04, 03, 02, 01, 00, 99, 94, 93, 92, 91, 90, 89, 88, 87, 86, 85, 84, 83, 82, 81, 80, 79, 78, 77, 76. This part is also sometimes called Porsche 911 Blinker Switch. We stock turn signal switch parts for most Porsche models including Boxster, 924, 930, 912 and Cayenne.