Get the Best Priced Dodge Caliber Tail Light

When it comes to driving, working tail lights are not an option. You are legally required to have functional rear lighting. The compact hatchback won't be safe to drive otherwise. Other motorists may not see the Dodge Caliber in front of them when it is dark. Tail lights also have brake lights and turn signal lights; without these, someone behind you can't predict the move you will make. The situation can turn into a dangerous safety hazard. If a tail light isn't working, replace it immediately to maintain your vehicle's safety rating.

How Tail Lights Work

The tail lights will come one whenever you turn the switch that activates the headlights. If your car has a sensor for the lights, both the front and back sets will turn on. The tail lights are on the same relay, meaning they are wired to the same switch. Both the front and back lights will come on together, unless there is an electrical problem and Dodge Caliber tail light removal is needed. The tail lights are also wired directly to the battery. Headlights are as well. When you switch on a turn signal, those lights will activate in front and back as well, and the brake lights will come on as soon as you step on the pedal.

Reasons for Tail Light Failure

A bad bulb is the most common reason a tail light goes out. Burnt out bulbs can easily be replaced, but they can be more prone to breaking if there's moisture in the assembly. Cracked lenses can cause water to seep in. A collision with another vehicle or an impact with an object can damage the surface, which can also reduce light output. Damage to a socket, connector, or wiring can cause a tail light to fail. A bad relay or fuse can as well. If that's so, a new assembly will be needed rather than just, for example, a 2007 Dodge Caliber tail light bulb.

How Do You Replace a Tail Light Cover?

The Dodge Caliber tail light cover is taken off by removing the screws holding it there. Next, you can pry the part off the seal. Installing the new cover is done the same way, but in reverse. Refer to the vehicle owner's manual for exact details on how to proceed with tail light cover replacement.

How Do You Change a Tail Light?

If you're just changing a bulb, you should be able to access the rear of the assembly from the trunk. A failed 2008 Dodge Caliber tail light bulb, however, may be due to an underlying problem. If the tail light assembly needs to be replaced, its mountings must be removed first, before you take out the old one and fit in its replacement. Follow the owner's manual or instructions that come with the part for the exact steps and procedures. The cost of a tail light assembly is anywhere from $50 for a single unit to $150 for a pair. High performance models will be much more, but you can get great deals at PartsGeek.com, where auto parts can be ordered for less on an exclusive online catalog.