Get the Best Priced Nissan Maxima Steering Rack

The steering rack is what enables your car to make turns whenever you move the steering wheel. There are many, many parts to the rack and pinion. It is made of interconnecting shafts, a gearbox, and various joints. The steering column is connected to the steering rack as well. Over time, the rack can wear out. a failure will compromise your ability to steer the Nissan Maxima. That can lead to a dangerous situation, even a terrible accident, if it happens when you are driving.

Warning Signs of Impending Steering Rack Failure

If the steering rack is wearing out, it's very possible the steering wheel will feel very tight. This may be due to loss of hydraulic pressure or heat buildup in the gearbox. There might be a power steering fluid leak, which is another symptom that you can see. Power steering fluid leaking on the ground can be caused by a bad gasket, loose fitting, or other mechanical problem. The fluid smells like burning oil and is red or pink. You may also need 2004 Nissan Maxima rack and pinion removal if there is a grinding sound when steering, particularly when simultaneously turning and driving over a bump.

What Is the Power Steering Rack?

The power steering rack runs between both front wheels. It is an enclosed system that contains a steering pinion where the steering column meets the rack. A pump, driven by the engine, delivers high-pressure hydraulic fluid whenever you turn the wheel, so the system is lubricated and heat is minimized. The rack's many parts are connected via a series of shafts and U-joints. Problems with any single component means you need Nissan Maxima rack and pinion replacement. Steering racks are typically sold as single, integrated units.

How Does a Rack and Pinion Steering Work?

When you turn the steering wheel, a shaft moves and in turn moves the pinion gear. The rack moves when the gear spins. A metal tube encloses the gear set; each end of the steering rack protrudes from this tube, and a tie rod links each end of the rack to the suspension system.

Cost of Replacing a Rack and Pinion System

There's a fair amount of labor needed for this repair. You'll pay for that, but parts can be quite costly. For example, 2005 Nissan Maxima rack and pinion replacement can cost $820 to $1,442, and it can cost over $1,100 for the parts alone. You might pay as much as over $1,800 for 2000 Nissan Maxima rack and pinion replacement. There's considerable variability based on many factors, including model year and location. For older models, the variability levels out, but you'll still pay in the range of $1,002 to $1,824 if 1996 Nissan Maxima rack and pinion replacement is the answer to your automobile woes.

If cost is an issue, find and order the parts you need at PartsGeek.com, where prices on automotive products sold exclusively online are lower than anywhere else. You can save a lot of money. Thanks to our low overhead and will to pass the savings forward, our customers often spend a fraction of the price on car parts. Your ride is restored and bank account is preserved.