Get the Best Priced Ford Crown Victoria Shocks

Research on Shocks for Ford Crown Victoria

Ford Crown Victoria owners often don't look forward to the day they need new shocks. That day can come sooner or later. Shocks can last quite a while, but wear and tear can take a toll faster depending on a number of variables. It is hard to predict when struts and shock absorbers will go bad, but you'll certainly feel it. If your ride becomes bumpy, noisy, or hard to handle, then it is time to check the shocks and replace any parts as needed, before even more goes wrong.

Signs You Need Crown Victoria Shocks

It can take many years before the shocks start to wear out. When they do, you'll hear a lot of rattling inside the car and the bumpiness can become unbearable. Every bump and pothole you drive over will feel like a jolt. The vehicle may even be unpredictable to handle, even if you once had the best shocks for Crown Victoria Police Interceptor cars. Handling on turns and even with basic steering can also be come unpredictable and difficult. Crown Vic rear shock replacement is a real possibility if the car is squatting when you accelerate. The rear of the car can even touch the ground when you go over recesses in the pavement. If the front shocks go bad, the car can plunge forward when you step on the brake pedal, and a loss of control is possible. An excessive amount of oil on the outside of a shock absorber can mean it is in danger of failing.

What Is the Front Strut on a Car?

The front strut has a more sturdy design to account for greater forces and the weight of the engine. It supports the car with a shock absorber and a coil spring. The piston in the shock helps to dampen the motion of the wheels. A spring absorbs energy and supports the weight and height of the vehicle. The assembly attaches the suspension to the wheel hub and the car's frame. Struts have an integrated design and are more work for mechanics to replace, so Crown Vic strut replacement should only be done at a qualified shop. Individual shock absorbers are generally the piston and cylinder components only.

Cost of Replacing the Crown Victoria Shocks

The Crown Victoria front struts with shock absorbers in a 2000 vehicle run from $346 to $523 for both sides. One front assembly is $191 to $284. By contrast, Crown Victoria shock absorbers will cost you $128 to $226 for one rear part and $202 to $383 for two. Two front struts/shock absorbers in a 2010 model can go as high as $707. There's a bit of variability in prices, but you can guarantee yourself some savings by finding the parts you need most at PartsGeek.com. Traditional auto parts stores often raise prices to pay their operating costs. We sell auto parts exclusively on the web, so overhead is not an issue. Customers therefore save on parts that will give their ride a boost and prevent future repairs and expenses.