Get the Best Priced Jeep Wrangler Shock Absorber

As a Jeep Wrangler owner, you already know that your Wrangler offers a stiff and jerky ride. Unfortunately, this problem is common to all Jeep Wranglers, regardless of the model year. Some of the Jeep Wrangler shock absorber issues that you will have to face are described below.

The Jeep Death Wobble

You can check any online Jeep forum and you will find tons of owners, including Jeep Wrangler owners, talking about the Jeep death wobble. This wobble is related to the shaking of the suspension when you drive over potholes and rough surfaces. It also occurs when you drive at speeds ranging from 45 mph to 55 mph. The wobble can be frightening for a first-time Jeep Wrangler owners. However, the forums will give you enough ways to find a Jeep death wobble fix, including replacing the Jeep Wrangler shock absorbers. Make sure you get it fixed as you could find it hard to control the vehicle due to excessive shaking of the front or rear portion. Above all, the constant shaking and wobbling can damage other components, such as tie rods, bearings and springs, making the fix even more expensive.

Wearing Out of Jeep Wrangler Shock Absorber

Those who love off-roading will notice that the Jeep Wrangler shock absorbers wear off quickly. This can result in a mild wobble to begin with, but as the shock absorbers keep wearing, the wobble will turn into an uncomfortable shaking and vibration even when you drive over small bumps. It will also affect the performance of your Wrangler when you go off-roading. So get those worn shock absorbers replaced right away.

Uncomfortable and Rough Ride

It is prudent to remember that the Jeep Wrangler is elevated quite a bit from the ground. As a result, even if you drive over a small bump, you will find the ride jerky and rough. However, you can reduce the height of the body by replacing the shock absorbers and the coil over the springs with lower ones. Just make sure they are high-performance shock absorbers and springs so that it doesn't affect the suspension of your Jeep Wrangler.

Jeep Wrangler Shock Absorber Recall

While not really a Jeep death wobble recall, Chrysler has issued a Technical Service Bulletin to offer a fix for the famous Jeep death wobble. This recall occurred in 2012 for model years 2005 to 2010. Chrysler states that the wobble is not due to a faulty suspension system or shock absorbers. Instead, it is the vibration that is transmitted from the steering wheel to transmission.

The TSB has been posted on Jeep forums and also issued to Jeep dealerships with ways on how to fix the death wobble. Some of the ways to fix is by replacing worn out Jeep Wrangler shock absorbers and ensuring that tires are properly inflated. You can check with your dealer for a fix.

Cost of Replacing Jeep Wrangler Shock Absorbers

If you are looking at Jeep Wrangler shock absorber replacement, it will cost between $174 and $339. Labor will cost anywhere from $52 to $67 and the parts will cost around $122 to $272. These prices do not include taxes and other fees.

At PartsGeek, you can find the best shocks for Jeep Wrangler, along with other parts and accessories. We are solely an online store and hence, we have lower overheads. We pass on the cost benefits to our customers, who can make purchases without worrying about the cost or quality of our products.