Get the Best Priced Jeep Wrangler Power Steering Pump
-
Buy With ConfidenceDelivering reliable auto parts service since 2008
-
30 Day ReturnsOrdered the wrong part? Enjoy peace of mind with easy returns
-
Call To OrderNeed help ordering? Call us toll free at 1-800-541-9352 to order
-
Fast DeliveryGet the parts and accessories you need when you need them
-
Huge SelectionHuge selection of OEM, stock replacement or aftermarket accessories
-
Competitive PricesWe have the all the parts you need at the most competitive prices
Shop Jeep Wrangler Replacement Power Steering Pump
A Jeep Power Steering Pump on a Wrangler series is located in the front section of the engine compartment. The Power Steering Pump is driven by a belt that goes around the AC compressor pulley, the Crankshaft, and the camshaft and alternator. Some Jeeps also have a smog pump driven off this same best of belts. The Power steering pump is driven from the engine and controlled by the hydraulic needs of the steering. The Power steering pump allows hydraulic pressure to be delivered to the steering.
Steering is very effected when the power steering pump malfunctions. Malfunctions can cause moderate to severe problems. Often the Jeep will be very hard to steer, especially when at a stop and the driver attempts to turn the wheel. Often the culprit is low or leaking power steering fluid. These problems are easily addressed before pump failure. Failure to address these issues will result in premature pump failure.
We stock these Power Steering Pump brands for the Jeep Wrangler: ReplacementA1 CardoneSKPDIY SolutionsAC Delco
Power Steering Pumps available for the following Jeep Wrangler years: 2018, 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998, 1997, 1995, 1994, 1990, 1989, 1988, 1987, 18, 17, 16, 15, 14, 13, 12, 11, 10, 09, 08, 07, 06, 05, 04, 03, 02, 01, 00, 99, 98, 97, 95, 94, 90, 89, 88, 87. This part is also sometimes called Jeep Wrangler Steering Pumps. We stock power steering pump parts for most Jeep models including Grand Cherokee, Cherokee, Liberty, CJ7, TJ, CJ5, Commander, Grand Wagoneer, Patriot, Compass, Comanche, Wagoneer, J10, J20, CJ6, Scrambler, DJ5 and Commando.
Select your Wrangler year


Power Steering Pump
Vehicle | Engine |
---|---|
1997 Jeep Wrangler | 4.0L 6 Cyl |


Power Steering Pump
Vehicle | Engine |
---|---|
2003 Jeep Wrangler | 4.0L 6 Cyl |


Power Steering Pump
Vehicle |
---|
1998 Jeep Wrangler |


Power Steering Pump
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
Vehicle | Engine |
---|---|
1997 Jeep Wrangler | 2.5L 4 Cyl |


- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
Vehicle |
---|
1995 Jeep Wrangler |


Power Steering Pump
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
Vehicle |
---|
1995 Jeep Wrangler |


- Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
- Meets or exceeds O.E. performance.
- Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
- Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Vehicle |
---|
2015 Jeep Wrangler |


Power Steering Pump
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
Vehicle |
---|
1994 Jeep Wrangler |


- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
Vehicle | Engine |
---|---|
1989 Jeep Wrangler | 2.5L 4 Cyl |


Power Steering Pump
Vehicle |
---|
2015 Jeep Wrangler |


- Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
- Meets or exceeds O.E. performance.
- Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
- Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Vehicle | Engine |
---|---|
2010 Jeep Wrangler | 3.8L V6 |


Power Steering Pump
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
Vehicle |
---|
2014 Jeep Wrangler |


- Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
- Meets or exceeds O.E. performance.
- Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
- Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Vehicle | Engine |
---|---|
2007 Jeep Wrangler | 3.8L V6 |


- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
Vehicle | Engine |
---|---|
1987 Jeep Wrangler | 2.5L 4 Cyl |


- Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
- Meets or exceeds O.E. performance.
- Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
- Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Vehicle |
---|
2013 Jeep Wrangler |


Vehicle |
---|
2006 Jeep Wrangler |


Power Steering Pump
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
Vehicle |
---|
1995 Jeep Wrangler |


- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
Vehicle |
---|
2011 Jeep Wrangler |


- OE Style for easy replacement and fitment
- Built with high-quality materials to ensure durability
- Stringent quality control ensures part meets product standards
Vehicle | Engine |
---|---|
2003 Jeep Wrangler | 4.0L 6 Cyl |


Vehicle |
---|
2002 Jeep Wrangler |


- All components are closely inspected and validated to meet the strictest quality standards to improve part durability
- Assembled units are 100% functionally tested for leak-free performance, prior to packaging, to help guarantee unit performance that meets vehicle specifications
- Cam packs closely are inspected for any wear or imperfections and replaced with new when needed
- High-temperature seals are utilized for durability and reliability
- Housing is cleaned and inspected at multiple stages in the manufacturing process to minimize corrosion and rust prior to component assembly
- Input shaft seal surfaces are micro-finished for precise fit and leak-free performance
- Multiple cleaning and washing stations, with regular contamination audits, for every component inside the pump minimize internal contamination and increase part service life
- Sealing surfaces are polished, restored, and checked for microfinish. This helps ensure maximum sealing to minimize leaks.
- Seals and O-rings are replaced with new parts for extended life and reliability
Vehicle | Engine |
---|---|
2002 Jeep Wrangler | 2.5L 4 Cyl |
Related Steering Parts
-
Jeep Wrangler Air Bag Clockspring$70.95
-
Jeep Wrangler Ignition Lock Assembly$30.58
-
Jeep Wrangler Ignition Lock Cylinder$7.72
-
Jeep Wrangler Ignition Switch$9.97
-
Jeep Wrangler Power Steering Hose$3.72
-
Jeep Wrangler Steering Damper$25.00
-
Jeep Wrangler Steering Gearbox$113.43
-
Jeep Wrangler Steering Linkage Assembly$141.95
-
Jeep Wrangler Tie Rod$8.72
Bought this part for my jeep. Very easy to install and worked perfectly - Chance
At first I was somewhat hesitant to buy parts online. I ordered a power steering pump and was more than satisfied when it arrived on time. Very easy to assemble. I will definitely be using "parts geek" more in the future. - JEEPS
Seems to work good no problems so far. Flushed out steering system per instructions. - T.N.T.
Good reman pump delivered as advertised. Will buy again from Parts Geek. - Good product, as advertised.
Item looks to be perfect, matched up to the old one great and is working. - Thanks Part Geek
This remanufactured part was spot on. Well packed and complete. I purchased a reservoir and pulley as well. All parts were complete and matched. As the unforeseen issues can arise, it wasn't with these parts. - James Brooks