Get the Best Priced Mercedes C230 Intake Manifold

The word manifold means to multiply one pipe into many. In a car, there are intake and exhaust manifolds. The intake manifold is important because it directs the air-fuel mixture to each cylinder in the engine. Coolant also flows through the intake manifold, so it can reduce the temperature of the engine and prevent it from overheating. The most common problems with the part is leaks, which often come from a damaged gasket. Any problem must be fixed promptly to avoid serious engine problems.

Function of the Mercedes C230 Intake Manifold.

If there are no Mercedes intake manifold problems, the part will evenly distribute the mixture into the combustion engine. A partial vacuum is created inside the manifold. It is produced by piston movement and the throttle valve, and may be used to power auxiliary systems in the car. The manifold directly impacts the power the engine can output, as any deficiencies will cause the engine to operate less efficiently, or not at all.

Potential Problems with an Intake Manifold

A broken Mercedes intake manifold flap has plagued many vehicles, which could affect power, idle, and overall performance. Vehicle owners have also reported their Mercedes intake manifold runner control stuck closed, which affects fuel and air flow. This could trigger the Check Engine light and an error code. One of the most common problems, however, is a leaking gasket, often caused by the heating cycles in the engine. If coolant is leaking, it can cause the engine to overheat. Leaks in the fuel-air mixture can diminish the performance of the engine, causing rough idling, backfires, and leaks of a milky fluid when water and motor oil mix. Coolant is brightly colored, so you'll notice it right away under the vehicle.

Cost of Fixing an Intake Manifold

The cost varies depending on the problem. A Mercedes intake manifold tumble flap may cost you under $50. An entire manifold assembly for the Mercedes can cost close to $400 or more. That's not even including the labor needed to access the manifold, remove it, and replace it with a new one. Gasket replacement often requires Mercedes intake manifold removal, and will cost you anywhere from $329 to $416.

What Is the Intake Manifold Gasket?

Gaskets are usually plastic and rubber parts that create a seal. The intake manifold gasket attaches the component to the top of the engine. A gasket usually looks like a cross section of the part it is intended to seal and attach. They're usually very solid, but heat and vibration can cause it to loosen, crack, or otherwise degrade over time due to expansion and contraction.

How to Save on an Intake Manifold

Like all automotive parts, it is possible to spend less on an intake manifold than you ordinarily would. There are many different retailers and dealers. You can save the most by going to PartsGeek.com. Our manifolds and other automotive parts and accessories are only sold over the web, which reduces overhead to an extent we can pass on significant savings to the customer. The thought of having to replace your intake manifold may invoke fears of going broke. By shopping with us, this terrible notion can go away and you can better manage the expense of restoring your vehicles original luster.