Call To Order: 1-800-541-9352

Get the Best Priced Ford Expedition Intake Manifold

Select Your Vehicle:
  • Fast Shipping
  • 30-Day Return Policy
  • Low Prices

Ford Expedition Replacement Intake Manifold Information

When an issue crops up or a part must be replaced, don't economize with a low-quality component. A Ford Expedition is meant to have the correct auto parts to deliver full power. Rough and ready all-terrain vehicles such as your terrain-mastering Ford Expedition are designed to handle rough terrain wherever they're driven but in return they need timely maintenance and high-quality parts to continue dominating the world's dangerous curves. Your Ford Expedition is ready to overcome any landscape, but must have first-rate quality OEM and aftermarket parts so it can go to where you want to go. Ford is a well known producer of reliable and inventive vehicles that also supply great design and hot looks on the road. If you drive a well made vehicle with an illustrious history, you want a Ford. Encase yourself in magnificence, luxury and cutting-edge appeal with the aid of an enduring Ford auto. That Ford in the garage was put together using the best quality and skill; it ought to have new replacement components with a similar high level of value. Simply put, the function of your car or truck's Ford Expedition Intake Manifold is to distribute oxygen to the engine cylinder. A vehicle's Ford Expedition Intake Manifold is the part of the motor that supplies the air-fuel mixture to the cylinders. Your vehicle's Ford Expedition Intake Manifold allows the steady air flow necessary for efficient performance. Your automobile's Ford Expedition Intake Manifold often serves as the installation point for your vehicle's throttle body, carburetor, fuel injectors, and other components of your engine. Superb power and automotive performance are supported by top-notch parts and accessories. Your car or truck is outstanding because of its great performance and awesome style, so to have it running in its best condition you'll need the ultimate in replacement parts and accessories. You bought a high-performance car to enjoy its high-end engine power and performance, support that investment with outstanding new parts. Nobody will give you a better price on quality Ford aftermarket accessories than we can year in and year out. Utilize PartsGeek whenever you require the best quality automotive parts and be delighted by our excellent customer service and a fair price 24/7.

Ford Expedition Intake Manifold They are available for the following Ford Expedition years: 2014, 2013, 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998, 1997, 14, 13, 12, 11, 10, 09, 08, 07, 06, 05, 04, 03, 02, 01, 00, 99, 98, 97. This part is also sometimes called Ford Expedition Manifolds. We stock intake manifold parts for most Ford models including F150, Mustang, Crown Victoria, Explorer, Ranger, Taurus, F250 Super Duty, Focus, Windstar, Thunderbird, Explorer Sport Trac, E250, E150, F250, E150 Econoline, E250 Econoline, F350 Super Duty, E350 Super Duty, Bronco, Excursion, Escape, Five Hundred, F100, Fiesta, F150 Heritage, F350, E350 Econoline Club Wagon, Freestar, E350 Econoline, Transit Connect, Torino, Edge, Galaxie 500, Freestyle, Fusion, E350 Club Wagon, Country Sedan, LTD, E450 Super Duty and F550 Super Duty.

We stock these Intake Manifold brands for the Ford Expedition: Replacement, Dorman, SKP, DIY Solutions and Brock.

Intake Manifold for Ford Expedition - Partsgeek
› Change Vehicle
Review Fitment Notes to Ensure Proper Fit

Related Top Sellers

Research on Intake Manifold for Ford Expedition

Delivering the proper air-fuel mixture to the engine is essential for your vehicle to run normally. The intake manifold is the part that enables it to get there. Essentially a system that multiplies one pipe into many, this component splits the flow so the mixture gets to each cylinder. The exhaust manifold's job is to evenly split the mixture so each cylinder head gets the same amount. If your engine performance changes, it may be due to a bad manifold, or the associated gasket.

Signs of a Bad Ford Expedition Intake Manifold

If there's a problem related to the manifold, it is often the gasket that seals the part to the cylinder head. This is important since a vacuum is created within. Common signs of trouble include misfiring, decreased power, stalling, and reduced fuel efficiency. A coolant leak, identified by fluid collecting under the SUV, or a distinct smell or steam, is another sign. Your vehicle's engine may also unexpectedly overheat, because the coolant levels can drop too low. A rusted or cracked manifold can have just as detrimental an effect, and even a Ford Explorer intake manifold can be a bad thing.

What is the Intake Manifold Gasket?

This gasket is usually made of either plastic or rubber. It seals the manifold to the cylinder head of the engine. Heat affects this component, making it heat up, expand, and contract. Over time, this can create leaks. A gasket doesn't look like much. It's basically flat and follows the cross-sectional contours of the manifold. Whether you have a Ford Exhibition or a Ford Escape intake manifold, the same problems can occur.

Basics of an Intake Manifold Vacuum

A Ford Exhibition intake manifold leak can be severe in part because of the vacuum the part creates. The manifold generates a partial vacuum because of the downward moving pistons and restricting throttle valve. In some cases, this vacuum can be used to power auxiliary systems such as power brakes, cruise control, power windows, windshield wipers, and more. If it's disrupted, lots of problems can occur. An intake manifold is often made with aluminum or cast iron, although composite plastics have been becoming more common in recent years.

Cost of an Intake Manifold

Being that it's associated with the engine, many people think an intake manifold will be unaffordable to replace; they're better off with a new vehicle. It's not cheap. The manifold, however, is not an expensive part. Most intake manifolds are between $100 and $200 (gaskets are even less), but replacing them involves a lot of labor, which can add $300 to $400 to the final price. Fixing a Ford Expedition intake manifold coolant leak can be a bit of an investment. There is an opportunity to save, however., selling automotive parts and accessories exclusively via the web, cuts the prices because it has less overhead to consider. We're therefore able to supply you with a 2003 Ford Expedition intake manifold, for example, and enable the final costs to be less than they'd ordinarily be.

Some of our Customer Reviews
Somewhat Satisfied
Reviewer: Jshedges

Fit, finish and included hardware kit with new thermostat & o-ring were complete and of good quality. Tear down and Installation took 1 day, was straight forward and achievable for a DIY'er like me. The built in o-ring type gaskets are a big improvement over the OEM gasket set and the fit to heads & throttle body were spot on. Be sure you have 3/8" extenstions x 2 and universal joint socket for the daisy chain necessary to reach the manifold & COP bolts/screws in the back. A coat hanger with your kids toy magnet taped on the end for retrieving dropped tools and fasteners out of the engine is indispensable as well. The only reason I'm not giving the manifold 5 stars is Dormans use of self tapping screws rather than machine threaded inserts for COP and bracket placement on the manifold. Otherwise great product. Will buy Dorman again.

2000 Ford Expedition Intake Manifold

Neither Satisfied Nor Dissatisfied
Reviewer: Mark

I was skeptical at first about buying my parts from an online store, but I was unable to locate an intake manifold for a 2000 ford anywhere! So i ordered the sensor. It shipped. I was able to track it and let my customer know exactly what day it would arrive. The entire experience was so easy and hassle free! I am definitely going to be a "Parts Geek" from now on!

2000 Ford Expedition Intake Manifold

Very Satisfied
Reviewer: Dorman Intake Manifold - Upper -

Based on the other reviews of this product, this looks to be a winner. This is Dorman part # 615-188 and fits multiple Ford vehicles. It even includes all gaskets and hardware. For the price, no way you can beat this!

2001 Ford Expedition Intake Manifold

Somewhat Satisfied
Reviewer: David

Easy to install had hardware problems male v. female position of screws.

1999 Ford Expedition Intake Manifold

Very Satisfied
Reviewer: Mike

Part worked well and came with the gasket kit. description did not say but the part worked great.

2001 Ford Expedition Intake Manifold

Somewhat Satisfied
Reviewer: expedition slave

The product itself fits well and seems to perform well also.I have only put a few miles on the car so can't evaluate it's longevity yet. My only complaint is when I took it out of the box it looked quite different than original.There is a pipe coming out of the original air intake hole and there isn't on the dorman part but there is a hole in the actual manifold itself in the dorman.There needs to be instruction with it that explain there is an elbow in the parts bag that needs to be inserted in the manifold or it needs to be assembled at the factory. I actually went to a parts store and tried to buy the right part and send the partsgeek one back since my car was torn apart.They had the same one at there store and it also had the hole in it too we were at a loss until we saw the elbow in the parts bag. If you buy this part don't repeat my mistake you don't need the stress doing the job takes enough out of you as it is.

2001 Ford Expedition Intake Manifold