Call To Order: 1-800-541-9352

Get the Best Priced Ford Crown Victoria Intake Manifold

Select Your Vehicle:
  • Fast Shipping
  • 30-Day Return Policy
  • Low Prices

Ford Crown Victoria Replacement Intake Manifold Information

For eye-catching style with hordes of power consumers turn to Ford for their offbeat vehicle wishes. If you insist on a trusted, reliable Ford, you're confident you'll benefit from distinctive looks. Your Ford Crown Victoria is known as a first-rate family car - help it stay in top condition and safe for your family by using only the best auto parts and accessories. It's no shock that safety-conscious vehicle owners like you get how to find the highest quality at a reasonable price when seeking out Ford Crown Victoria car parts. You and your loved ones want comfort along with trustworthy performance; that's why you selected a mode of transport like the family-friendly Ford Crown Victoria. The Ford in your carport was made with the highest quality and skill; it needs new OEM components of the same high level of reliability. The basic function of a car's Ford Crown Victoria Intake Manifold is to regulate and distribute oxygen to the combustion chamber. The main job of the Ford Crown Victoria Intake Manifold is to smoothly send the air-fuel mixture to the ports in the piston heads. Your vehicle is special because of its excellent performance and terrific style, so to have it purring along in top form you want the acme in high-quality parts. Drivers who love optimized vehicles understand that absolutely nothing is more crucial than installing the highest quality aftermarket parts. Great horsepower and road performance are supported by high-quality components and accessories. Protect your investment by insisting on only the finest replacement parts .... the only kind we stock. It doesn't matter which model you drive, we always have the Ford parts and accessories you are searching for. Your car or truck's appearance and performance are crucial to you - so they are significant to us as well. Come to every time you want high quality automobile parts to be rewarded by our topnotch service and an honest price every day.

Ford Crown Victoria Intake Manifold They are available for the following Ford Crown Victoria years: 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998, 1997, 1996, 11, 10, 09, 08, 07, 06, 05, 04, 03, 02, 01, 00, 99, 98, 97, 96. This part is also sometimes called Ford Crown Victoria Manifolds. We stock intake manifold parts for most Ford models including F150, Mustang, Expedition, Explorer, Ranger, Taurus, F250 Super Duty, Focus, Windstar, Thunderbird, Explorer Sport Trac, E250, E150, F250, E150 Econoline, E250 Econoline, F350 Super Duty, E350 Super Duty, Bronco, Excursion, Escape, Five Hundred, F100, Fiesta, F150 Heritage, F350, E350 Econoline Club Wagon, Freestar, E350 Econoline, Transit Connect, Torino, Edge, Galaxie 500, Freestyle, Fusion, E350 Club Wagon, Country Sedan, LTD, E450 Super Duty and F550 Super Duty.

We stock these Intake Manifold brands for the Ford Crown Victoria: Replacement, Dorman, API, DIY Solutions and Brock.

Intake Manifold for Ford Crown Victoria - Partsgeek
› Change Vehicle
Review Fitment Notes to Ensure Proper Fit

Related Top Sellers

Research on Intake Manifold for Ford Crown Victoria

The Ford Crown Victoria was the last of the full-frame, rear-wheel-drive, passenger sedans produced in North America. The Crown Victoria's durability was the principle quality that popularized its use with taxicab and fleet owners to become one of the most commonly used police vehicles in North America.

The intake manifold distributes the air-fuel mixture to the cylinders and the carburetor. On a non-fuel-injected engine, after the air and fuel are mixed, the combustion mixture passes through a manifold of tubes on its way to each cylinder. In a fuel-injected engine like the Crown Victoria, the fuel is injected into the intake manifold, which then distributes the fuel-air mixture to the cylinders.

Because the air pressure inside the manifold is lower than that in the air surrounding the engine, the manifold will suck in additional air through the leak. This will put too much air into the cylinders and decrease the ratio of gasoline to air, resulting in a less efficient combustion by which your engine will have to work harder to turn the crankshaft. So if your car is responding more wearily every time you press down on the accelerator, it could the result of a leak in the intake manifold.

What are some other signs of a leaky intake manifold?

Hissing, whistling, sucking, gulping or slurping noises while the car is idling are signs of a leak in the intake manifold. The engine might stall at slow speeds, or keep running after its ignition is turned off. Try spraying small amounts of starter fluid on the seals of the intake manifold while the engine is idling, and if this causes the engine to briefly speed up, you can be fairly sure that the fluid is slipping in through the leaks

Why were the 1996-2001 Ford plastic manifolds so problematic?

They tended to split across the front and break in the rear. Often this would occur without previous symptoms. Other times a slow coolant loss may have preceded the failure. When the intake failed, the engine coolant poured out, and the engine overheated. The front temperature sensor and rear heater hose connection were also prone to pulling out of the intake. Despite a class action suit against them, Ford has never recalled the vehicles. Instead, Ford agreed to reimburse some customers and extended the warranty to seven years from the date of purchase. The last warranty extensions ended in 2008. They introduced an improved intake manifold beginning on the 2002 models that added a cast aluminum piece across the front and a redesigned alternator mount. The new intake manifold has less stress on these key mount areas and a stronger material to support the load.

What does a Ford Crown Victoria intake manifold replacement cost?

PartsGeek prices its Dorman 2004 Ford Crown Victoria Intake Manifold Upper 4.6L V8 at $160.33. A Dorman 1997 Ford Crown Victoria Intake Manifold Upper 4.6L V8 is priced at $187.33. These engine intake manifolds are designed specifically to work with Dorman OE Solutions Intake Manifold Gaskets only. They do not work with coolant heated PCV vehicles.

Some of our Customer Reviews
Very Satisfied
Reviewer: Nick

The manifold was a perfect fit and replicated the original perfectly. The gasket set was needed and was complete.

2001 Ford Crown Victoria Intake Manifold

Very Satisfied
Reviewer: feeee

Very good product I bouy the item last week came that Monday very fast shipping

2003 Ford Crown Victoria Intake Manifold

Very Satisfied
Reviewer: GlassFrank

Delivery was great and fast. The sender in this case was on point. I won't hesitate to buy from this company again.

2001 Ford Crown Victoria Intake Manifold

Very Satisfied
Reviewer: 1996 Ford Crown Victoria Dorman Intake Manifld- Upper

fast shipping, super service, super price and great manifold

1996 Ford Crown Victoria Intake Manifold

Somewhat Satisfied
Reviewer: lowmanbob3

product was vert timely shipped & recieved,but the front right hand coil mount was broken. had to drill a small hole to mount.

2000 Ford Crown Victoria Intake Manifold

Very Satisfied
Reviewer: Great Product Match up perfectly

perfect fit, bolted on fast and clears plug wells. Big runners looks as close to OEM as possible i was a bit weary but when i got it it was a quality piece had everything i need as well thanks

1998 Ford Crown Victoria Intake Manifold