Get the Best Priced Jeep Wrangler Flywheel

Research on Flywheel for Jeep Wrangler

A flywheel holds an important place in a vehicle's clutch assembly, which is the part of the vehicle that keeps the transmission connected to the engine. The friction against the clutch plate is provided by the flywheel so that the engine is able to drive the wheels. If the flywheel gets damaged or worn out, it leads to a number of different problems that have symptoms, like unpleasant sounds and vibrations. It is important that you learn to identify these problems so that you can rectify them before they result in significant harm and expensive repairs.

Signs that Your Flywheel is Damaged or Worn Out

There are quite a few signs that indicate that a vehicle's clutch assembly has a damaged or worn out flywheel. You may notice these symptoms when your car is pulling away or you are engaging or disengaging the clutch. As soon as any issues become apparent, you should get your vehicle to a mechanic for an inspection and diagnosis to determine if you need a Jeep Wrangler flywheel replacement.

Gear Slippage: This problem is usually caused by a worn out clutch that has overheated the flywheel, causing it to warp, weaken or crack. However, gear slippage may also occur due to grease or oil contamination or a component that has been incorrectly fitted. The main symptoms of gear slippage are slow acceleration, a soft clutch pedal, a delay after you have released the clutch pedal, slipping back to the previous gear and inability to change gears.

Chattering: This is one of the most common problems when it comes to the flywheel. It is a symptom that is linked to a variety of malfunctions. You will hear the chattering noise when the clutch slips on the flywheel and constantly grabs and releases instead of engaging smoothly from the start. Chattering is usually caused by contaminated clutch disc, like burnt material brought on by overheating. In addition, chatter may be an indication of a pilot bearing that has worn out or brushing in the flywheel, grooves in the flywheel or a damaged clutch disc.

Burning smells, vibrations, clutch drag and pulsation are other warning signs that your flywheel is starting to wear or fail. If you notice any of these symptoms in your vehicle, it is time to get it to a reputed auto shop for an inspection and find out if you need a new flywheel.

Jeep Wrangler Recall for Clutch Problems

Chrysler recalled certain 2006 Jeep Wrangler, Dodge Viper and Liberty vehicles that were manufactured between July 1, 2005 and July 31, 2006. It was found that the engines of the affected vehicles may not start when the clutch is depressed. In addition, the engine may also start without the clutch pedal being depressed. This could cause the vehicle to expectedly lurch forwards or backwards. This was because the springs that were in the clutch pedal position switch, which prevents the vehicle from starting unless the clutch is depressed, could break. If the vehicle moved unexpectedly, it could increase the risk of a crash.

As a remedy, Chrysler notified owners of the affected vehicles and dealers replaced the clutch ignition interlock switch without charging the owners.

Cost of Flywheel Replacement for Jeep Wrangler

If you need to replace the flywheel of your Jeep Wrangler, you will need to spend between $63.05 and $603.13, depending on the brand you choose. Labor costs vary from one auto shop to another, so the amount you spend depends on how much the auto repair shop you go to charges for the service. In many auto shops, it is recommended that you get your flywheel resurfaced or if necessary, replaced when you get your clutch replaced.

If you are looking for 2008 Jeep Wrangler flywheel, LUK clutch or other Jeep parts, PartsGeek is the name you can trust to take care of your auto needs. We are a top online supplier for premium car parts and accessories which are available at the most competitive prices for all makes and models.