Get the Best Priced Jaguar S Type Control Arm

A Jaguar S Type control arm is a hinged suspension link between the chassis and the wheel hub. The end of the control arm is connected to your car's frame by Jaguar S Type control arm bushings and is connected to your suspension through a ball joint. This assembly connects the cars wheel to the suspension and allows the wheel to turn left or right. If you have a problem in your Jaguar S-Type front lower control arm you can hear a knocking sound or a squeaking sound when you go over bumps in the road. This can be an alert to check your suspension assembly. A 2000 Jaguar S Type rear lower control arm can become completely disconnected from the suspension if you take too long to address these warning signs. If this happens you will not be able to drive the vehicle.

I Can't Get It Out

I am changing my 2000 Jaguar S-Type lower control arm. I need to remove the old ball joint. I need to know how to make the press fit to get the ball joint out. Do you need to take the control arm apart or am I just using the tool wrong? You are probably not using the tool wrong but instead using the wrong tool. It may be very difficult or impossible to remove the ball joint with a press. Also be careful about renting a standard sized ball joint remover because your S-Type ball joints are too wide for the tool to accommodate. There are larger sized tools available or you can investigate a Jaguar S-Type forum online for some creative ways to remove that stubborn ball joint.

Recall Alert

There has been a recall on Jaguar S-Type model year 2000 for suspension issues. They describe the front suspension lower ball joints not being tightened to the proper specifications when they were attached to the 2000 Jaguar S-Type lower control arm. If a ball joint attaching nut is not properly tightened the possible result is that they can loosen and cause a break in the ball joint stud. This situation can cause you to lose control of your vehicle and possibly crash.

Handling the Cost

Your Jaguar is a unique vehicle. It was designed to provide the luxury in all areas with a performance attitude. You don't have to settle for anything less. Maybe you feel you only need to change your upper control arm for 2000 Jaguar S-Type, your Jaguar S Type rear suspension bushings, or both. If your pocket permits it is advised to replace all contributing parts at the same time. You will save $400-$500 on a front lower ball joint replacement on labor costs by completing the job yourself. These parts will keep your Jaguar driving the way you expect. When purchasing your parts, the giant auto part places are not your best option. They have a giant overhead to pay. We don't. Your best bet is to get your parts from us, PartsGeek.com. We are an online parts supplier. We have all the parts you need online at a savings.