Get the Best Priced Ford Fusion Control Arm

Research on Control Arm for Ford Fusion

Ford Fusion cars' suspension systems rely on control arms to bridge the gap between the frame and the wheels. Though the control arm itself may last a long time, you may still need to replace it because the ball joints or bushings have gone bad. Whether you need to replace your Ford Fusion control arm bushings or the ball joints, a new control arm will restore the structural integrity to your Fusion.

What are Control Arms?

The control arms help to stabilize the wheels while letting them move. As you likely know, they join the wheels to the chassis. At either end are the most vulnerable parts of the control arms: bushings and ball joints. The bushings are rubber connector that reduce vibrations between the control arm and the chassis, while the ball joints allow the wheels to freely turn and link the control arm to the wheel hub. Sometimes, the Ford Fusion control arm bushing's rubber core will wear down, and other times the ball joint will become worn. Completely failed ball joints can be dangerous because they could cause a loss of vehicle control.

How Long Do Control Arms Last?

The lifespan of the control arms on your Ford Fusion is based on the exact part you install and your driving habits. On average, you can get 90,000 to 100,000 miles or more from a new set of control arms. Occasionally, an accident will cause damage that requires you to replace the control arms, and rough roads may speed the wear of the bushings. If you regularly drive over rutted roads, you may need to replace the control arms more frequently than someone who drives over flat, well-kept freeways.

Signs of Bad Control Arms

As your controls arms wear, you'll notice a few things when driving. Some signs of bad control arms are subtle, and unless you're paying attention, you could miss them. You may find your steering vibrating or wandering a bit, especially if you don't apply consistent pressure to the steering wheel. This wandering may cause the tires to wear unevenly. Clunking noises may be caused by worn bushings jostling around in their position. This is another sign that you need to replace the control arm.

What is the Ford Fusion Control Arm Replacement Cost?

Just as your mileage may vary with fuel economy, your price may vary when it comes to repairs. How much your mechanic charges for parts and labor is, in most cases, not standardized, and you could spend much more just by going to the wrong auto repair shop or to your dealer. For instance, the price range for a 2011 Ford Fusion lower control arm could be as little as $160 to $168 or much higher, depending on your mechanic's typical charges. To save on replacing a control arm, do it yourself and skip the mechanic. PartsGeek.com is also here to help you to save money on your new control arms for your Ford Fusion. You can save a lot of money by getting your control arms for less and installing them yourself. You'd only have to pay the price of the control arms and an afternoon of your time.