Get the Best Priced Dodge Magnum Control Arm

Research on Control Arm for Dodge Magnum

The Dodge Magnum uses control arms for its front and rear suspensions. While there are several different possible configurations, this design typically uses two wishbone-shaped control arms to locate the wheel. Each control arm has two mounting positions one to the frame and another at the wheel, it bears a shock absorber and a coil spring to absorb vibrations. Control arm suspension allows for more control over the camber angle of the wheel, which describes the degree to which the wheels tilt. They also help decrease roll or sway and provide for a more consistent steering feel. Because of these characteristics, control arm suspension is typical on the front wheels of larger cars.

Symptoms for a Dodge Magnum Control Arm Bushing Replacement

Steering problems are one of the first symptoms of a damaged control bushing. The steering may lose its responsiveness. At high speed, it may even start wandering or make the vehicle shift erratically. The driver can feel the wheel vibrate while in motion. The vehicle may start inclining to one side, to some degree when taking those sharp turns. A bad bushing will compromise performance and comfort. Since the purpose of the control arm bushing is to buffer against small bumps, a damaged one will not be as efficient, resulting in vibrations all through the drive. In case of extreme wearing out, when the rubber bushing is completely worn out, the metal sleeves of the control arm will begin to rattle, resulting in an annoying clunking noise from the front end, particularly while turning or reversing. Furthermore, the wheel with a damaged bushing will begin to wobble while driving.

A sudden change in braking efficiency can be credited to a damaged control arm bushing. This is because the forward and backward swaying of the control arm is not realized during braking due to bushing wear. However, this effect will not be consistent, making braking unstable. Besides, when the vehicle is braked suddenly, the front end will continue to oscillate forward. When accelerating from a static state, a backward movement will be witnessed in the rear end of the car, along with erratic steering, as defined above. When speeding, or taking a turn at a slow pace, the steering begins trembling, and a tugging effect is observed.

Dodge Magnum Control Arm Replacement Cost

It is advisable that control arms should be repaired or replaced as early as there's any sign of damage, and control arm replacement costs are typically $117 - $306 for most of vehicles. The element itself will normally cost between $42 - $103, with labor time usually an hour or two.

Unless the Control Arm itself is damaged, perhaps as the result of an accident, there is no need to replace it. If it is the bushings that are worn, it is the bushings that need to be replaced, and only the bushings. The bushings need to be replaced on both sides simultaneously. Therefore if for instance it's your lower control arm all you need is a Dodge Magnum lower control arm bushing replacement. But in case the whole control arm is damaged a Dodge Magnum lower control arm replacement will come in handy. Make a point of visiting PartsGeek.com for all your automobile parts and accessories.