Get the Best Priced Chevrolet Silverado 2500 HD Control Arm

Your Chevrolet Silverado 2500 HD Control Arm plays a vitally important role in every vehicle. This component is also known as the wishbone or A-arm of the suspension system; the control arm is a flat and roughly triangular sub-frame that pivots in two places. This component usually has two end-broad and narrow. While the broad end is attached at the end of the frame and the pivots are usually attached to the steering knuckle ad is made to the pivot on the ball joint.

The Control Arm

Your Chevrolet Silverado 2500 HD Control Arm also makes the coil spring to respond to the axle and wheel assembly when treading through the bumps and potholes on the road. The pivots that are at the other end of the control arm usually allow for the up and down motion of the coil springs, helping them to absorb the shocks during the bumps. Your Chevrolet Silverado 2500 HD Control Arm in your vehicle synchronizes all the four tires to the motion of the vehicle to allow for a smooth and comfortable traveling experience. It will also increase and improve the steering and reduces the tire wear out with less traction contact surface as the tire gets into contact with the road. To be able to meet this requirement it is important that the control arms are built to be strong. However, like all other parts, with time and extensive use, they will deteriorate. Therefore, to ensure that the control arms function properly and allow the suspension system to be in top condition, it's vital that you carry out regular checks.

Signs that your Control Arm is wearing out

Just like any other component that is found in your Chevrolet Silverado 2500 HD, the control arm is prone to wear out and will need to be replaced eventually. According to experts, a number of control arms are known to wear out after 90,000 to 100,000 miles. Control arms can bend or break while you drive over large potholes and bumps, while the bushings can wear out by themselves. It's very difficult to notice the control arm wearing out since it may require a more detailed look at the vehicle. Manufacturers also say that the common signs the control assembly needs to be replaced are if the steering wheel is vibrating or there is a banging noise when you drive over bumps.

Chevrolet Silverado 2500 HD Control Arm Costs

A Chevrolet Silverado 2500 HD Control Arm replacement costs between $126 and $374. The labor costs are estimated at $34 and $67. The parts are priced between $99 and $114. It's advisable that you get a personalized quote that is based on your location, the make, year and model of your car. When it comes to purchasing your Chevrolet Silverado 2500 HD Control Arm, it's recommended that you get it from a reliable auto parts and accessories dealer. PartsGeek.com are an online auto parts and repair retailer. We sell all Chevrolet Silverado 2500 HD auto parts and accessories exclusively online meaning there are no overhead costs.