Call To Order: 1-800-541-9352

Get the Best Priced Dodge Challenger Cold Air Intake

Select Your Vehicle:
  • Fast Shipping
  • 30-Day Return Policy
  • Low Prices

Dodge Challenger Replacement Cold Air Intake Information

It's not surprising that high-end drivers like you have it right about how to focus on the performance level of their Dodge Challenger by upgrading to performance-optimized car parts. Dodge builds vehicles that are optimized for the best performance, and as with their other designs, the Challenger simply can't perform as intended without top-quality replacement auto parts and accessories. Performance-oriented road demons, like the stylish Dodge Challenger, were intended to be stressed hard, but later given needed repairs. Dodge is a well known manufacturer of reliable and powerful vehicles that also feature great design and solid style on the road. When searching for plush interior surroundings and economical style vehicles produced by Dodge pass the test. Your Dodge was manufactured using care and craftsmanship; it should have new replacement components of the same top level of quality. Support your Dodge's systems by only installing the most outstanding high-quality engine components. You chose your high-performance car to enjoy its excellent power and performance, protect your investment by buying first rate aftermarket parts and accessories. A Dodge Challenger Cold Air Intake is a particular device employed to boost the complete energy and performance of the vehicle's engine by pulling in cooler external air and taking it instantly to the motor. Dodge Challenger Cold Air Intakes are available in an array of styles and are a great addition or substitution for normal air intakes that are typically rather substandard by comparison; high-end intakes will enhance gas mileage and performance. Happily, an intake can often be put in place by novice hobbyists using the simplest tools - most of the time only a screwdriver. Purchasing a Dodge was a good choice, now maintaining it in top condition is even more sensible. No matter whether you drive a convertible or everyday Detroit metal, we have all the parts and accessories you are looking for right here. No matter whether you drive an exotic sports car or a sport utility vehicle, we have all the aftermarket parts you are searching for right on site at

They are available for the following Dodge Challenger years: 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2010, 2009, 2008, 20, 19, 18, 17, 16, 15, 14, 13, 12, 11, 10, 09, 08. This part is also sometimes called Dodge Challenger Intakes. We stock cold air intake parts for most Dodge models including Ram 1500, Charger, Ram 2500, Durango, Ram 3500, Dakota, Magnum, Dart, Nitro and Avenger.

We stock these Cold Air Intake brands for the Dodge Challenger: Replacement, K&N, AFE and BBK.

Cold Air Intake for Dodge Challenger - Partsgeek
› Change Vehicle
Review Fitment Notes to Ensure Proper Fit

Related Top Sellers

Research on Cold Air Intake for Dodge Challenger

The cold air intake delivers cool air into the car's engine. While cars generally don't have air intake systems like this, since advanced emission controls and fuel injection systems are used, aftermarket providers offer the option. The goal of installation is usually improvements to engine performance and efficiency. Colder air with higher densities and more oxygen is the reason.

What a Cold Air Intake Does

The device is designed to generate turbulence, so air resistance can be reduced. A positive Dodge Challenger cold air intake review may be because a more direct route for air into the engine is provided. This eliminates the need for muffling systems. The intake's length is shorter than the factory-installed type. Also, dynamic air pressure is used to give positive pressure when the vehicle is traveling at cruising speed.

Installing a Cold Air Intake

You can install a cold air intake without a professional. The Dodge Challenger cold air intake Mopar owners may obtain, for example, should only be installed if the engine is cool. Once the batter cable is disconnected from the negative terminal, the old air intake can be removed. The kit should have a silicone coupling, which attaches to the throttle body. A couple is then secured by tightening the hose clamp at the end, and another clamp goes in front of the coupling. The intake tube slides into the silicone coupling, which is then tightened to the tube via brackets. You'll then have to plug in the mass air flow sensor and reconnect the battery. The Dodge Challenger cold air intake install should then give you the power boost you were looking for.


If your installing this part, be sure it has a thermal barrier, or else you won't see the power gains guaranteed. Also look for one with an oiled filter element, and a bypass valve to prevent water ingestion. Some models are approved by the California Air Resource Board, so check for this if your state has strict standards.

Cost of Installing a Cold Air Intake

The pricing varies depending on the model and the retailer. This is not a standard auto part, so you'll see greater variability. A 2009 Dodge Challenger cold air intake may cost you $100 or less. Complete kits can run into the $300 range. These include intakes, filters, and more for the specific engine in your vehicle.

You Can Save on a Cold Air Intake

The first prices you see don't have to be the final answer. You can find a cold air intake for 2009 Dodge Challenger R/T vehicles for less at Our unique pricing model comes from the fact we have reduced overhead by selling automotive parts and accessories exclusively online. That means you don't have to spend as much on fixing or modifying your ride. The work you choose to do does not have to be expensive. You can drive the most powerful vehicle on the road and pat yourself on the back for keeping even more cash in your pocket!

Some of our Customer Reviews
Very Satisfied
Reviewer: Dean - Challenger "Johnny Reb"

Very happy with price, delivery

and product. Notice a difference

in pick up and performance

2011 Dodge Challenger Cold Air Intake

Very Satisfied
Reviewer: Stan

Could not be happier with parts geek. Intake system got here the next day and in great shape.

2013 Dodge Challenger Cold Air Intake

Very Satisfied
Reviewer: Bill K. Dover, Ohio

Totally satisfied with the performance of the K/N intake. My acceleration on take off and midrange punch is very noticeably quicker. At least a 20hp gain on my 2009 Challenger.

2009 Dodge Challenger Cold Air Intake

Very Satisfied
Reviewer: CharlieT

Very pleased with how quickly item was shipped. Everything was included in box. Easy to install. Only issue was the connector for the IAT was broken. Otherwise is a great product.

2014 Dodge Challenger Cold Air Intake

Very Satisfied
Reviewer: Ron L

I ordered the CAI on a Tuesday and it was delivered the nexy day! Very impressed.It was a simple process to install and looks great in the engine bay.

2016 Dodge Challenger Cold Air Intake

Very Satisfied
Reviewer: Looks good

Perfect fit, really dresses up the engine bay! Must have for a challenger!

2014 Dodge Challenger Cold Air Intake