Get the Best Priced Dodge Ram 2500 Ball Joint

When you take your big Dodge Ram out into the wilderness you will enjoy yourself blasting over dirt trails as fast as lightning. The Ram series of trucks was always meant to take more stress on the road than any other similar-sized vehicle, but after all, these pickups are not made from adamant. Typically, hard off-road driving will break parts on your Ram pickup, and the parts most likely to break are the one closest to the ground, especially the suspension. If you enjoy off-road driving in a Ram 2500, you should be prepared for broken struts, battered shocks, and Dodge Ram 2500 ball joint problems. Fortunately, the work involved in repairing these ball joints is not as expensive as transmission work, although it will definitely be more expensive than having a new pair of brake pads installed. There are a lot of truck drivers out there who don't mind replacing these parts every so often, since the fun of off-road driving is what they are most interested in, but the average pickup owner who just wants to move stuff around on the paved roads may want to think twice about the costs involved in this kind of fun.

A Big Job for A Big Truck

When a ball joint breaks, you'll know something is wrong. These joints connect the wheels of the car to the frame (through the suspension system), and losing a ball joint can easily result in a wheel coming off - not a tire, mind you, but a wheel. Replacing a ball joint requires extensive familiarity with suspension systems. The work can last for a few hours, but in expert hands it is not a taxing job. However, if you can change the oil on your car but draw the line at changing the brake pads, then ball joint replacement is definitely in the no go zone. There are ball joint service kits available online for those who have enough mechanical knowledge to do the job correctly, but unless you own power jacks and a Dodge Ram 2500 ball joint tool, you'll be better off leaving this one to the guys at the garage.

Buying Enough to Preserve Your Pickup

When you go online to get new ball joints for a Ram pickup, you'll be able to find a good selection of them at a wide range of prices, some of them quite high. Upscale ball joints, made of top-notch alloys, are not cheap. You need your Dodge Ram 2500 ball joint specs on hand to ensure that you get the parts that work for the model, and you should be able to get a decent price on them from a reputable parts supplier like PartsGeek.com. Most suppliers allow them to be purchased individually, but like tires and shocks, ball joints should be replaced in batches.

Making the Call on the Eight Possible Combinations

Don't scrimp on the price of a good ball joint. They are generally very durable, and a broken joint means you're not going anywhere, so you want that strong alloy. When you evaluate your Dodge Ram 2500 ball joint replacement cost, you'll need to decide how many joints you'll need. There are two joints on each wheel, and four-wheel drive vehicles require two ball joints on the back wheels, unlike two-wheel drive. At a minimum, you'll need two joints, for either the lower attachment on each side of the front end, or the upper attachments on each side of the front end, and you should probably get four, so that the upper and lower joints on each wheel of the front end are replaced simultaneously. Depending on your choices, you can expect to pay the following: for two lower joints on a 2WD, both sides, $440 to $619. For four lower joints on a 4WD, both sides, $421 to $596. For two upper joints on 2WD, both sides, $322 to $580. And for four upper joints on a 4WD, both sides, $387 to $662.