Get the Best Priced Chrysler Town & Country Alternator

Research on Alternator for Chrysler Town & Country

The component in your car that puts out between 13 and 18 AC volts of power through all the electrical components in a car plus the ignition system while charging the battery is the alternator. If the alternator delivers less than 13 volts, the battery will not be recharged. When replacing the alternator, you can save a lot of money if you can manage to change on your own. It is not common to see the owner of the car getting hands on to replace the car parts, but it is advisable since it makes one appreciate the car and develop a tendency to service the car when needed.

How to change the alternator of the Chrysler Town & Country

The first step is to disconnect the positive battery cable which is colored red. Then next step is to locate where the alternator is on your vehicle. Use a tool called serpentine belt tool to loosen the belt to move it away from the pulley that is on the alternator. Remove the bolts that hold the alternator in place using a socket and ratchet; they are normally a minimum of 2 or 4. After a successful operation, remove the alternator from its place and unplug the nuts of all the electrical connections. After removing the old one, get the new one and inspect it before putting it where it's supposed to be. The reason for doing this is to make sure that the old alternator and the new alternator are similar in size and specifications. You have to make sure that the pulley match and the voltage regulator are also the same as the old one. If there is a discrepancy, place the pulley of the old alternator onto the new one. Using the same process you used in removing the alternator, place the new one in the reverse order. Connect the electrical wires and plugs to the new alternator, slide it into position and start threading in the bolts to hold the alternator into position.

Place the pulley in place and bolt it to fit, always make sure that the alignment of the belt pulley is okay. Using the serpentine belt tool, slip the belt onto the pulley as it should be and remove the tool by stretching the belt to the target position. Reconnect the positive terminal of the battery cable and start your car to make sure that the alternator you have placed is charging.

Cost of purchasing a new Chrysler Town & Country Alternator

A Chrysler Town & Country Alternator replacement costs between $310 and $552. It's advisable that you get a personalized quote that is based on your location, the make, year and model of your car. When it comes to purchasing your Chrysler Town & Country Alternator, it is recommended that you get it from a reliable online retailer. PartsGeek.com are an online auto parts and accessories retailer. We sell all Chrysler Town & Country auto parts and accessories exclusively online, meaning there are no overhead costs.