Make/Model
Close X
Search by Make / Model

Search from over 10 Million Auto Parts

Select Your Vehicle:
  • Fast Shipping
  • 30-Day Return Policy
  • Low Prices

 

1990-1999 Subaru Legacy Axle Assembly - Front - EMPI W0133-1614019

Review Fitment Notes to Ensure Proper Fit

EMPI W0133-1614019 Click to Enlarge
(Read reviews)
Product List Price:
$399.93
Our List Price: $65.48
In Stock
Position: Front
Condition: New
Shipping Options: Ground Shipping
Part Number: W0133-1614019
Brand: EMPI
This Axle Assembly Fits the Following: Catalog: A
Notes: **Differential fluids should be changed and the proper additives should be used before installing axles on Subaru vehicles. Replacing fluids in the front, rear, and especially center differential, is recommended. Shuddering and noise are often attributed to axle shafts often due to contaminated lubricants. **Check and replace worn suspension bushings, ball joints, engine mounts and transmission mounts. Fatigued rubber suspension parts will sag and create additional strain on the inboard joint causing noise and premature failure. **Upon axle removal from the transmission, technician must check carefully that the stub axle snap ring on the inner joint comes out with the spline and not left in the transmission. If the old axle does not have an inner snap ring, or if it is only partially intact, the snap ring or its parts will still be in the transmission and must be removed before the new axle is installed.
Vehicle Transmission
(90) 1990 Subaru Legacy  
(97) 1997 Subaru Legacy  
(98) 1998 Subaru Legacy  
(99) 1999 Subaru Legacy Automatic 

This Axle Assembly Fits the Following:
Notes: Differential fluids should be changed and the proper additives should be used before installing axles on Subaru vehicles. Replacing fluids in the front, rear and especially center differential is recommended. Shuddering and noise are often attributed to axle shafts can be due to contaminated lubricants, worn suspension bushings or Ball Joints.
Vehicle Transmission
(91) 1991 Subaru Legacy  
(92) 1992 Subaru Legacy  
(93) 1993 Subaru Legacy  
(94) 1994 Subaru Legacy  
(95) 1995 Subaru Legacy  
(96) 1996 Subaru Legacy  
(99) 1999 Subaru Legacy Standard 

This Axle Assembly Fits the Following:
Notes: Production: 05/01/1992-, Differential fluids should be changed and the proper additives should be used before installing axles on Subaru vehicles. Replacing fluids in the front, rear and especially center differential is recommended. Shuddering and noise are often attributed to axle shafts can be due to contaminated lubricants, worn suspension bushings or Ball Joints.
Vehicle Sub Model Production Range Transmission
(92) 1992 Subaru Legacy L FWD  Fr:05-01-92  Standard 
(93) 1993 Subaru Legacy L FWD  Fr:05-01-92  Standard 

This Axle Assembly Fits the Following:
Notes: Production: -02/28/1994, Differential fluids should be changed and the proper additives should be used before installing axles on Subaru vehicles. Replacing fluids in the front, rear and especially center differential is recommended. Shuddering and noise are often attributed to axle shafts can be due to contaminated lubricants, worn suspension bushings or Ball Joints.
Vehicle Sub Model Production Range Transmission
(94) 1994 Subaru Legacy L FWD  To:02-28-94  Standard 

Product Description

The 1990-1999 Subaru Legacy Axle Assembly, sold by EMPI, is a single axle component for the front of the vehicle. Compatible with standard and automatic transmissions, the axle transmits the weight of the vehicle to the front wheels and helps maximize overall stability. Normal stresses can cause an axle to wear out and eventually fail, disabling the vehicle; the new unit, supplied individually per purchase, restores normal function. The installation may require the changing of differential fluids and additives, since lubricants can become contaminated which can cause noise and shuddering while driving.

Features:

  • New C.V. Joints - Inner and Outer
  • New C.V. Boots
  • New Stainless Steel Boot Clamps
  • New Retaining Clip and Hardware (where applicable)
  • New Precision Machined & Heat Treated Center Shafts
  • New Dust Shields installed (where applicable)
  • New Axle Nut (where applicable)
  • New ABS Rings installed (where applicable)
  • New Inboard Bearing and/or Flange installed (where applicable)
  • Precision ground Bearing Lands and Sealing Surfaces
  • New High Temperature / High Pressure Moly Grease
  • Empire
Description: Subaru Legacy Front Axle Assembly. Brand: EMPI. Fits Years: 1990, 1997, 1998, 1999, 90, 97, 98, 99. **Differential fluids should be changed and the proper additives should be used before installing axles on Subaru vehicles. Replacing fluids in the front, rear, and especially center differential, is recommended. Shuddering and noise are often attributed to axle shafts often due to contaminated lubricants. **Check and replace worn suspension bushings, ball joints, engine mounts and transmission mounts. Fatigued rubber suspension parts will sag and create additional strain on the inboard joint causing noise and premature failure. **Upon axle removal from the transmission, technician must check carefully that the stub axle snap ring on the inner joint comes out with the spline and not left in the transmission. If the old axle does not have an inner snap ring, or if it is only partially intact, the snap ring or its parts will still be in the transmission and must be removed before the new axle is installed. - W0133-1614019


More Axle Assembly Brands for 1990-1999 Subaru Legacy


Some of our Customer Reviews
Very Satisfied
Reviewer: billioned

4/27/12 10:39 AM

great parts store fast ship




Authorize.Net Merchant - Click to Verify
Get Special Offers - Join Our Mailing List
BROWSE Home View Cart Catalog Articles
HELP Track Order Contact Us About Us Retrieve Quote Return Policy Cancellation Policy
RESOURCES Affliate Program Shop By Make Models Brands
SECURITY This site protected by Trustwave's Trusted Commerce program
REVIEWS
© Copyright 2017 Parts Geek ® Providing discount auto parts online since 2008.