2019 GMC Sierra 3500 HD Control Arm

Part Number: 146474-07313734

Notes: Front; Upper; Driver & Passenger Side

Features:

• Direct Fit Replacement - Guaranteed to fit and function for your specific application
• Quality Tested - built to a strict level of product standards.
• Improved ride comfort and longer life

Position: Front Upper

Part Number: 146474-07640068

Notes: Suspension Control Arm and Ball Joint Assembly -- Driver Side; Front; Lower

Position: Front Left Lower

Part Number: 146474-07486913

Notes: Suspension Control Arm and Ball Joint Assembly -- Front; Driver or Passenger Side; Upper

Features:

• Direct Fit Replacement
• Quality Tested - built to a strict level of product standards.

Position: Front Upper

Part Number: 146474-05608276

Notes: Suspension Control Arm and Ball Joint Assembly -- Supreme, complete arm With ball joint, corrosion resistant, hardware included and greaseable for increased durability

Features:

• SINTERED METAL STRENGTH: Increase durability and extend service life with over-built sintered metal technology.
• SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree SAE grease fitting included.
• OPTIMAL PERFORMANCE: Meet or exceed OE specifications with Cast Steel construction.
• RESISTS CORROSION: Prevent rust build up and increase longevity with protective surface treatment.

Position: Front Left Lower

Part Number: 146474-05608277

Notes: Suspension Control Arm and Ball Joint Assembly -- Supreme, complete arm With ball joint, corrosion resistant, hardware included and greaseable for increased durability

Features:

• SINTERED METAL STRENGTH: Increase durability and extend service life with over-built sintered metal technology.
• OPTIMAL PERFORMANCE: Meet or exceed OE specifications with Cast Steel construction.
• SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree SAE grease fitting included.
• RESISTS CORROSION: Prevent rust build up and increase longevity with protective surface treatment.

Position: Front Right Lower

Part Number: 146474-05574694

Notes: Suspension Control Arm and Ball Joint Assembly -- Supreme, complete arm With ball joint, reinforced control arm body for increased durability.

Features:

• STRONGER BUILD: Rely on brute strength with a Forged Steel control arm with a Thicker Cross Section & Filled in Hole/Recess & Reinforced Ball Joint Head for added durability.
• SINTERED METAL STRENGTH: Increase durability and extend service life with over-built sintered metal technology.
• LOCK IT IN WITH KNURLING: Ensure an optimal fit with added knurling that locks the control arm bushing to the sub-frame.
• SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree SAE grease fitting included.
• RESISTS CORROSION: Prevent rust build up and increase longevity with protective surface treatment.

Position: Front Upper

Part Number: 146474-05845518

Notes: Suspension Control Arm and Ball Joint Assembly -- TTX, complete arm With ball joint, upgraded bushing for increased durability, ideal for fleet and working truck applications.

Features:

• SUPERIOR TOUGHNESS: Get longer-lasting performance from patented sintered metal bearings.
• ULTIMATE DESIGN: Experience higher performance from upgraded rubber bushings with knurling that secures the control arm bushing to the sub-frame.
• INSTALLATION READY: Simply secure ball joint to the vehicle with part specific Slotted Castle Nut & Easy Snap Cotter Pin provided.
• SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree SAE grease fitting included.
• LONGER SERVICE LIFE: Prevent rust build-up with Repel-TEK(TM) surface treatment for a longer life.
• SUPERIOR SEAL: Lock out moisture and contaminants with Integri-Boot(TM) design built into the ball joint assembly.
• LARGER SPHERE DESIGN: Optimize performance with application-specific ball stud system with larger sphere.
• A STRONGER BOND: Keep fasteners secure and vibration resistant with pre-applied Nylok thread adhesive.
• OPTIMAL PERFORMANCE: Meet or exceed OE specifications with Cast Steel construction.
• Show More
• Show Less

Position: Front Left Lower

Part Number: 146474-05845519

Notes: Suspension Control Arm and Ball Joint Assembly -- TTX, complete arm With ball joint, upgraded bushing for increased durability, ideal for fleet and working truck applications.

Features:

• SUPERIOR SEAL: Lock out moisture and contaminants with Integri-Boot(TM) design built into the ball joint assembly.
• LARGER SPHERE DESIGN: Optimize performance with application-specific ball stud system with larger sphere.
• A STRONGER BOND: Keep fasteners secure and vibration resistant with pre-applied Nylok thread adhesive.
• OPTIMAL PERFORMANCE: Meet or exceed OE specifications with Cast Steel construction.
• SUPERIOR TOUGHNESS: Get longer-lasting performance from patented sintered metal bearings.
• ULTIMATE DESIGN: Experience higher performance from upgraded rubber bushings with knurling that secures the control arm bushing to the sub-frame.
• INSTALLATION READY: Simply secure ball joint to the vehicle with part specific Slotted Castle Nut & Easy Snap Cotter Pin provided.
• SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree SAE grease fitting included.
• LONGER SERVICE LIFE: Prevent rust build-up with Repel-TEK(TM) surface treatment for a longer life.
• Show More
• Show Less

Position: Front Right Lower

Part Number: 146474-05777942

Notes: Suspension Control Arm and Ball Joint Assembly -- TTX, complete arm With ball joint, upgraded bushing for increased durability, ideal for fleet and working truck applications.

Features:

• OPTIMAL PERFORMANCE: Meet or exceed OE specifications with Forged Steel construction.
• SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree SAE grease fitting included.
• LONGER SERVICE LIFE: Prevent rust build-up with Repel-TEK(TM) surface treatment for a longer life.
• SUPERIOR TOUGHNESS: Get longer-lasting performance from patented sintered metal bearings.
• ULTIMATE DESIGN: Experience higher performance from upgraded rubber bushings with knurling that secures the control arm bushing to the sub-frame.
• INSTALLATION READY: Simply secure ball joint to the vehicle with part specific Slotted Castle Nut & Easy Snap Cotter Pin provided.
• LOCKS OUT CONTAMINANTS: Ensure a superior seal with patented sealing ring that permanently locks the boot onto the ball joint housing.
• LARGER SPHERE DESIGN: Optimize performance with application-specific ball stud system with larger sphere.
• A STRONGER BOND: Keep fasteners secure and vibration resistant with pre-applied Nylok thread adhesive.
• Show More
• Show Less

Position: Front Upper

Part Number: 146474-05691846

Notes: Premium Steering and Suspension

Position: Front Left Lower

Part Number: 146474-05691847

Notes: Premium Steering and Suspension

Position: Front Right Lower

Part Number: 146474-05637472

Notes: Premium Steering and Suspension

Position: Front Upper

Part Number: 146474-05664963

Notes: Professional -- New

Position: Front Upper

Part Number: 146474-05984793

Notes: Suspension Control Arm -- New

Position: Front Left Lower

Part Number: 146474-05106130

Notes: Suspension Control Arm -- New

Position: Front Left Upper

Part Number: 146474-05106130

Notes: Suspension Control Arm -- New

Position: Front Right Upper

Part Number: 146474-05984794

Notes: Suspension Control Arm -- New; FORT WAYNE, IN PLANT (FWI)

Position: Front Right Lower

Part Number: W0133-2200333

Notes: Incl.Ball Joint & Bushings, Exc.Fort Wayne Plant

Position: Front Left Lower

Part Number: W0133-1976262

Notes: Incl.Ball Joint & Bushings, Exc.Fort Wayne Plant

Position: Front Right Lower

Part Number: W0133-2200333

Notes: Incl.Ball Joint & Bushings, Fort Wayne Plant

Position: Front Left Lower

Part Number: 146474-05858968

Notes: Suspension Control Arm and Ball Joint Assembly

Features:

• Directly replaces the original assembly
• Includes pre-installed ball joint and bushings
• Industry-leading testing to ensure a smooth, stable and safe ride
• Durably designed - additional coatings offer long-lasting rust and corrosion resistance

Position: Front Left Lower

Part Number: 146474-05570482

Notes: Suspension Control Arm and Ball Joint Assembly

Features:

• Directly replaces the original assembly
• Includes pre-installed ball joint and bushings
• Industry-leading testing to ensure a smooth, stable and safe ride
• Durably designed - additional coatings offer long-lasting rust and corrosion resistance

Position: Front Left Upper

Part Number: 146474-05855777

Notes: Suspension Control Arm and Ball Joint Assembly

Features:

• Directly replaces the original assembly
• Includes pre-installed ball joint and bushings
• Industry-leading testing to ensure a smooth, stable and safe ride
• Durably designed - additional coatings offer long-lasting rust and corrosion resistance

Position: Front Right Lower

Part Number: 146474-05570482

Notes: Suspension Control Arm and Ball Joint Assembly

Features:

• Directly replaces the original assembly
• Includes pre-installed ball joint and bushings
• Industry-leading testing to ensure a smooth, stable and safe ride
• Durably designed - additional coatings offer long-lasting rust and corrosion resistance

Position: Front Right Upper

Part Number: W0133-2742209

Notes: R-Series (RK) - Incl.Ball Joint & Bushings

Position: Front Upper

Part Number: W0133-1899421

Notes: R-Series (RK) - Incl.Ball Joint & Bushings

Position: Front Upper

Part Number: 146474-03653566

Notes: Suspension Control Arm and Ball Joint Assembly -- Premium OE Replacement

Features:

• HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
• ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
• LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
• EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• INSTALLATION READY -- Pre-installed ball joints with sealed sockets for maintenance-free operation
• Added Corrosion Protection

Position: Front Upper

Part Number: 146474-03206649

Notes: Control Arm -- Upper

Features:

• Control Arm

Position: Front Upper

Part Number: 146474-03206649

Notes: Control Arm -- Upper

Features:

• Control Arm

Position: Rear Upper

Part Number: 146474-03745216

Notes: Control Arm -- 3-3.5 in. Lift; With Shocks Hydro 7000

Position: Rear Upper

Part Number: 146474-03322365

Notes: Control Arm -- 3-3.5 in. Lift; With Shocks Max B8500

Position: Rear Upper

Part Number: 146474-03914943

Notes: Control Arm -- 3-3.5 in. Lift; With Shocks Monotube M9500

Position: Rear Upper

Part Number: 146474-03688617

Notes: Control Arm -- 3-3.5 in. Lift; With Shocks Nitro 8000

Position: Rear Upper

Part Number: 146474-07515694

Notes: Suspension Control Arm and Ball Joint Assembly

Position: Front Upper