2012 GMC Yukon XL 2500 Ball Joint

Part Number: 118732-07850586

Notes: Suspension Ball Joint

Features:

• OE Style for easy replacement and fitment

Position: Front Upper

Part Number: 118732-07345207

Notes: Suspension Ball Joint -- Front; Driver or Passenger Side; Upper

Position: Front Upper

Part Number: 118732-05804803

Notes: Suspension Ball Joint -- Adjustable - Greaseable; Camber/Caster Plus or Minus 3 Degrees

Features:

• TIME SAVERS IN THE BOX: Simplify installation with all essential mounting hardware included.
• Adjustment Range: ±3°

Position: Front Upper

Part Number: 118732-05362401

Notes: Suspension Ball Joint -- Original Grade. Non-Adjustable Type

Position: Front Upper

Part Number: 118732-05044873

Notes: Suspension Ball Joint -- Supreme - Premium Professional Solution; Enhanced greasable metal bearings for increased durability; Improved boot designs prevents contaminants; Non-Adjustable Type

Features:

• SINTERED METAL STRENGTH: Increase durability and extend service life with over-built sintered metal technology.
• TIGHTER GRIP: Avoid distortion and corrosion with knurling that ensures a snugger fit between connecting points.
• INSTALLATION READY: Simply secure ball joint to the vehicle with part specific Castle Nut & Cotter Pin provided.
• LARGER SPHERE DESIGN: Optimize performance with application-specific ball stud system with larger sphere.
• EXCEPTIONAL FIT AND FUNCTION: Prevent deformation during installation with this ball joint designed with a thicker, stronger flange.
• SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree SAE grease fitting included.

Position: Front Upper

Part Number: 118732-05470341

Notes: Suspension Ball Joint -- TTX - Extreme Durability; Patented technology; Over-sized greasable metal bearings for maximum service life; Superior boot seal protection; Non-Adjustable Type

Features:

• SUPERIOR TOUGHNESS: Get longer-lasting performance from patented sintered metal bearings.
• TIGHTER GRIP: Avoid distortion and corrosion with knurling that ensures a snugger fit between connecting points.
• A STRONGER BOND: Keep fasteners secure and vibration resistant with pre-applied Nylok thread adhesive.
• LARGER SPHERE DESIGN: Optimize performance with application-specific ball stud system with larger sphere.
• INSTALLATION READY: Simply secure ball joint to the vehicle with part specific Slotted Castle Nut & Easy Snap Cotter Pin provided.
• SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree & 90 Degree SAE grease fitting included.

Position: Front Upper

Part Number: W0133-2339415

Notes: Premium Problem Solver

Position: Front Upper

Part Number: 118732-05050055

Notes: Suspension Ball Joint

Position: Front Upper

Part Number: 118732-07357975

Notes: Suspension Ball Joint -- Adjustable; Non-Greasable; Due To OE Upper Control Arm Limitations This Ball Joint Should Not Be Used On Trucks With Tires Larger Than 33" Unless A Tall Knuckle Lift Kit Is Installed; Plus or Minus 3 Degree(s) Camber and/or Caster

Features:

• Construction and design validated by MOOG engineers
• Premium forged housing with increased cross section of up to 52% more material in key areas
• Hardened ball stud made of OE equivalent or better materials to withstand higher loads
• Easy to install.
• Designed to meet or exceed original equipment performance

Position: Front Upper

Part Number: 118732-05050055

Notes: Suspension Ball Joint -- Ball Joint Orientation Noted, Where Applicable

Position: Front Upper

Part Number: 118732-05307895

Notes: Suspension Ball Joint -- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces; Adjustable; Plus or Minus 3 Degree(s) Camber and/or Caster; Greasable

Features:

• Hardened ball stud made of OE equivalent or better materials to withstand higher loads
• Patent pending dust boot with encapsulated Belleville washer help control axial and radial movement
• Premium forged housing with increased cross section of up to 52% more material in key areas
• Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
• Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
• Larger grease reservoir and easy-to-install pre-tapped grease fitting hole for improved maintenance

Position: Front Upper

Part Number: 118732-07383471

Notes: Premium RD Rugged Design

Position: Front Lower

Part Number: 118732-07403332

Notes: Premium RD Rugged Design

Position: Front Upper

Part Number: 118732-07912480

Notes: Premium XL Extended Life

Position: Front Lower

Part Number: 118732-07519068

Notes: Premium XL Extended Life

Position: Front Upper

Part Number: 118732-07835263

Notes: Suspension Ball Joint

Position: Front Lower

Part Number: 118732-07489640

Notes: Suspension Ball Joint

Position: Front Upper

Part Number: 118732-05554354

Notes: C-TEK Standard

Position: Front Lower

Part Number: 118732-05609602

Notes: C-TEK Standard -- Standard

Position: Front Upper

Part Number: 118732-05554062

Notes: Premium Steering and Suspension

Position: Front Lower

Part Number: 118732-05554082

Notes: Premium Steering and Suspension -- Adj. +/- 3 Degrees

Position: Front Upper

Part Number: 118732-05595939

Notes: Premium Steering and Suspension -- Standard

Position: Front Upper

Part Number: W0133-1968009

Notes: 3/36 Warranty

Features:

• Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
• Low friction plastic bearings that enhance damping and reliability
• Manufactured using forged or cold formed steel
• Two-seat design is standard, and eliminates the need for a spring
• Top of the ball pins are polished
• Salt Spray Test (240hrs)
• Dynamic Test and Elasticity Test
• Original Equipment quality hardware installation accessories

Position: Front Upper

Part Number: 118732-07900554

Notes: Professional -- New; Greaseable; Adjustable; Plus or Minus 3 Degree(s) Camber and/or Caster

Position: Front Upper

Part Number: 118732-05932770

Notes: Suspension Ball Joint -- Non-Adjustable Type

Features:

• Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
• Delphi ball joints manufactured with high quality forgings for increased strength and smooth operation
• Chloroprene rubber boots to improve durability
• Delphi machines to micron tolerances to guarantee durability and smooth joint operation
• Anti-corrosion protection

Position: Front Upper

Part Number: 118732-09250754

Notes: Suspension Ball Joint

Position: Front Upper

Part Number: 118732-09250754

Notes: Suspension Ball Joint -- Ball Joint Orientation Noted, Where Applicable

Position: Front Upper

Part Number: 118732-07419393

Notes: Front; Upper; Driver & Passenger Side

Position: Front Upper

Part Number: 118732-05575427

Notes: Suspension Ball Joint -- Adjustable; Non-Greasable; Due To OE Upper Control Arm Limitations This Ball Joint Should Not Be Used On Trucks With Tires Larger Than 33" Unless A Tall Knuckle Lift Kit Is Installed; Plus or Minus 3 Degree(s) Camber and/or Caster

Features:

• Construction and design validated by MOOG engineers
• Premium forged housing with increased cross section of up to 52% more material in key areas
• Hardened ball stud made of OE equivalent or better materials to withstand higher loads
• Easy to install.
• Designed to meet or exceed original equipment performance

Position: Front Upper

Part Number: 118732-07988657

Notes: Suspension Ball Joint -- Design Version: Non-Adjustable

Position: Front Upper