2010 GMC Acadia Axle Assembly

Part Number: 30473-07427575

Notes: Front

Part Number: 30473-07937800

Notes: CV Axle Assembly

Position: Front Left

Part Number: 30473-07470296

Notes: CV Axle Assembly

Position: Rear Left

Part Number: 30473-07688845

Notes: CV Axle Assembly

Position: Rear Right

Part Number: 30473-07424599

Notes: CV Axle Assembly -- Half Shaft Only

Position: Front Right

Part Number: 30473-07454026

Notes: CV Axle Shaft -- Driver Side; Front

Features:

• 100% New Components
• Heat Treated
• Precision Machined

Position: Front Left

Part Number: 30473-07502414

Notes: CV Axle Shaft -- Passenger Side; Front

Features:

• 100% New Components
• Heat Treated
• Precision Machined

Position: Front Right

Part Number: 30473-05925223

Notes: CV Axle Assembly

Features:

• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing.
• CV Drive Axle is measured after assembly to ensure proper fit.
• CV Drive Axle shafts are inspected for run out to prevent vibration.
• High-quality grease withstands high-temperature and pressure extremes, which extends joint life.
• High-tech grinding machines maintain the original design of the outer housing, race and cage to guarantee reliable performance.
• Neoprene boots ensure excellent environmental stress resistance, which eliminates cracking - a leading cause of boot failure.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Splines are chased to ensure proper fit of the axle into the mating hub and transmission, which eliminates installation hassles.
• Threads are chased to ensure proper fit of the new retaining nut supplied with each CV Drive axle.
• Show More
• Show Less

Position: Front Left

Part Number: 30473-05925224

Notes: CV Axle Assembly

Features:

• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing.
• CV Drive Axle is measured after assembly to ensure proper fit.
• CV Drive Axle shafts are inspected for run out to prevent vibration.
• High-quality grease withstands high-temperature and pressure extremes, which extends joint life.
• High-tech grinding machines maintain the original design of the outer housing, race and cage to guarantee reliable performance.
• Neoprene boots ensure excellent environmental stress resistance, which eliminates cracking - a leading cause of boot failure.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Splines are chased to ensure proper fit of the axle into the mating hub and transmission, which eliminates installation hassles.
• Threads are chased to ensure proper fit of the new retaining nut supplied with each CV Drive axle.
• Show More
• Show Less

Position: Front Right

Part Number: 30473-05927026

Notes: CV Axle Assembly

Features:

• A new axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or stripped
• Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing
• CV Drive Axle measurements are validated after assembly to ensure a proper fit
• CV Drive Axle part numbers with an "HD" suffix are severe-duty applications and include a thermoplastic outboard boot for increased life and durability versus a traditional neoprene boot.
• High-quality grease withstands high-temperature and high-torque demands to ensure long-lasting, reliable performance
• Neoprene boots are designed with additional bellows, when needed, to resist bellow stress and cracking, which is the leading cause of boot failure
• Proprietary engineering processes ensure that all CV Drive Axles meet O.E. form, fit and function
• Splines are precision rolled to ensure proper fit of CV Drive Axle into the mating hub and transmission, which eliminates installation hassles
• Threads are precision rolled to ensure proper fit when axle nut is installed
• Transmission seal diameter is precision-machined after heat treatment to ensure correct surface finish, promoting long seal life
• Show More
• Show Less

Position: Rear Left

Part Number: 30473-05925229

Notes: CV Axle Assembly

Features:

• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing.
• CV Drive Axle is measured after assembly to ensure proper fit.
• CV Drive Axle shafts are inspected for run out to prevent vibration.
• High-quality grease withstands high-temperature and pressure extremes, which extends joint life.
• High-tech grinding machines maintain the original design of the outer housing, race and cage to guarantee reliable performance.
• Neoprene boots ensure excellent environmental stress resistance, which eliminates cracking - a leading cause of boot failure.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Splines are chased to ensure proper fit of the axle into the mating hub and transmission, which eliminates installation hassles.
• Threads are chased to ensure proper fit of the new retaining nut supplied with each CV Drive axle.
• Show More
• Show Less

Position: Rear Left

Part Number: 30473-05927027

Notes: CV Axle Assembly

Features:

• A new axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or stripped
• Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing
• CV Drive Axle measurements are validated after assembly to ensure a proper fit
• CV Drive Axle part numbers with an "HD" suffix are severe-duty applications and include a thermoplastic outboard boot for increased life and durability versus a traditional neoprene boot.
• High-quality grease withstands high-temperature and high-torque demands to ensure long-lasting, reliable performance
• Neoprene boots are designed with additional bellows, when needed, to resist bellow stress and cracking, which is the leading cause of boot failure
• Proprietary engineering processes ensure that all CV Drive Axles meet O.E. form, fit and function
• Splines are precision rolled to ensure proper fit of CV Drive Axle into the mating hub and transmission, which eliminates installation hassles
• Threads are precision rolled to ensure proper fit when axle nut is installed
• Transmission seal diameter is precision-machined after heat treatment to ensure correct surface finish, promoting long seal life
• Show More
• Show Less

Position: Rear Right

Part Number: 30473-05925230

Notes: CV Axle Assembly

Position: Rear Right

Part Number: 30473-05927020

Notes: CV Axle Assembly -- Supplied with Optional Heavy Duty Thermoplastic Outboard Boot

Features:

• A new axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or stripped
• Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing
• CV Drive Axle measurements are validated after assembly to ensure a proper fit
• CV Drive Axle part numbers with an "HD" suffix are severe-duty applications and include a thermoplastic outboard boot for increased life and durability versus a traditional neoprene boot.
• High-quality grease withstands high-temperature and high-torque demands to ensure long-lasting, reliable performance
• Neoprene boots are designed with additional bellows, when needed, to resist bellow stress and cracking, which is the leading cause of boot failure
• Proprietary engineering processes ensure that all CV Drive Axles meet O.E. form, fit and function
• Splines are precision rolled to ensure proper fit of CV Drive Axle into the mating hub and transmission, which eliminates installation hassles
• Threads are precision rolled to ensure proper fit when axle nut is installed
• Transmission seal diameter is precision-machined after heat treatment to ensure correct surface finish, promoting long seal life
• Show More
• Show Less

Position: Front Left

Part Number: 30473-05927022

Notes: CV Axle Assembly -- Supplied with Optional Heavy Duty Thermoplastic Outboard Boot

Features:

• A new axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or stripped
• Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing
• CV Drive Axle measurements are validated after assembly to ensure a proper fit
• CV Drive Axle part numbers with an "HD" suffix are severe-duty applications and include a thermoplastic outboard boot for increased life and durability versus a traditional neoprene boot.
• High-quality grease withstands high-temperature and high-torque demands to ensure long-lasting, reliable performance
• Neoprene boots are designed with additional bellows, when needed, to resist bellow stress and cracking, which is the leading cause of boot failure
• Proprietary engineering processes ensure that all CV Drive Axles meet O.E. form, fit and function
• Splines are precision rolled to ensure proper fit of CV Drive Axle into the mating hub and transmission, which eliminates installation hassles
• Threads are precision rolled to ensure proper fit when axle nut is installed
• Transmission seal diameter is precision-machined after heat treatment to ensure correct surface finish, promoting long seal life
• Show More
• Show Less

Position: Front Right

Part Number: 30473-05927019

Notes: CV Axle Assembly -- Supplied with Standard Neoprene Outboard Boot

Features:

• A new axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or stripped
• Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing
• CV Drive Axle measurements are validated after assembly to ensure a proper fit
• CV Drive Axle part numbers with an "HD" suffix are severe-duty applications and include a thermoplastic outboard boot for increased life and durability versus a traditional neoprene boot.
• High-quality grease withstands high-temperature and high-torque demands to ensure long-lasting, reliable performance
• Neoprene boots are designed with additional bellows, when needed, to resist bellow stress and cracking, which is the leading cause of boot failure
• Proprietary engineering processes ensure that all CV Drive Axles meet O.E. form, fit and function
• Splines are precision rolled to ensure proper fit of CV Drive Axle into the mating hub and transmission, which eliminates installation hassles
• Threads are precision rolled to ensure proper fit when axle nut is installed
• Transmission seal diameter is precision-machined after heat treatment to ensure correct surface finish, promoting long seal life
• Show More
• Show Less

Position: Front Left

Part Number: 30473-05927021

Notes: CV Axle Assembly -- Supplied with Standard Neoprene Outboard Boot

Features:

• A new axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or stripped
• Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing
• CV Drive Axle measurements are validated after assembly to ensure a proper fit
• CV Drive Axle part numbers with an "HD" suffix are severe-duty applications and include a thermoplastic outboard boot for increased life and durability versus a traditional neoprene boot.
• High-quality grease withstands high-temperature and high-torque demands to ensure long-lasting, reliable performance
• Neoprene boots are designed with additional bellows, when needed, to resist bellow stress and cracking, which is the leading cause of boot failure
• Proprietary engineering processes ensure that all CV Drive Axles meet O.E. form, fit and function
• Splines are precision rolled to ensure proper fit of CV Drive Axle into the mating hub and transmission, which eliminates installation hassles
• Threads are precision rolled to ensure proper fit when axle nut is installed
• Transmission seal diameter is precision-machined after heat treatment to ensure correct surface finish, promoting long seal life
• Show More
• Show Less

Position: Front Right

Part Number: 30473-09248081

Notes: CV Axle Assembly

Features:

• GSP New CV Axle's are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride.

Position: Front Left

Part Number: 30473-07970704

Notes: CV Axle Assembly

Features:

• GSP New CV Axle's are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride.

Position: Front Right

Part Number: 30473-09242560

Notes: CV Axle Assembly

Features:

• GSP New CV Axle's are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride.

Position: Rear Left

Part Number: 30473-05365477

Notes: CV Axle Shaft

Features:

• Limited Lifetime Warranty
• ABS axles fit non-ABS applications unless otherwise noted
• ISO 9001:1007 and TS 16949:2009 Certified Company

Position: Front Left

Part Number: 30473-05365476

Notes: CV Axle Shaft

Features:

• Limited Lifetime Warranty
• ABS axles fit non-ABS applications unless otherwise noted
• ISO 9001:1007 and TS 16949:2009 Certified Company

Position: Front Right

Part Number: 30473-05605648

Notes: CV Axle Shaft

Features:

• Limited Lifetime Warranty
• ABS axles fit non-ABS applications unless otherwise noted
• ISO 9001:1007 and TS 16949:2009 Certified Company

Position: Rear Left

Part Number: 30473-05605647

Notes: CV Axle Shaft

Features:

• Limited Lifetime Warranty
• ABS axles fit non-ABS applications unless otherwise noted
• ISO 9001:1007 and TS 16949:2009 Certified Company

Position: Rear Right

Part Number: 30473-05931610

Notes: GM Original Equipment -- New

Features:

• GM regularly updates production and service part designs to integrate new materials and technologies
• Rotates to allow the transmission of power at a constant speed while helping to reduce friction and heat
• Axle CV and tri-pod joints are covered with protective thermoplastic boots
• Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
• ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle

Position: Front Left

Part Number: 30473-05899351

Notes: GM Original Equipment -- New

Features:

• GM regularly updates production and service part designs to integrate new materials and technologies
• Rotates to allow the transmission of power at a constant speed while helping to reduce friction and heat
• Axle CV and tri-pod joints are covered with protective thermoplastic boots
• Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
• ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle

Position: Front Right

Part Number: W0133-2072746

Notes: New - Lifetime Warranty

Position: Front Left

Part Number: W0133-1853641

Notes: Genuine GM

Position: Front Right

Part Number: W0133-2072746

Notes: Genuine GM

Position: Front Left

Part Number: W0133-2435130

Notes: 100% New

Position: Front Left

Part Number: W0133-1853641

Notes: New - Lifetime Warranty

Features:

• OE-Equivalent and a Direct fit Replacement
• Utilizes OE style crimp boot clamps
• Provides exceptional reliability
• 100% new OE replacement
• Uses top quality Neoprene boots
• High pressure moly-grease Caution - Additional Inspection of All Engine, Transmission, and Suspension Mounts is Highly Recommended. Worn or Faulty Engine, Transmission or Suspension Mounts May Be a Cause for Vibration or Noise Which May be Incorrectly Attributed to a Worn or Faulty Axle Assembly.

Position: Front Right

Part Number: W0133-1853616

Notes: New - Lifetime Warranty

Position: Rear Right

Part Number: W0133-1853615

Notes: New - Lifetime Warranty

Position: Rear Left

Part Number: 30473-07932137

Notes: CV Axle Assembly -- Complete Shaft

Position: Front Right

Part Number: 30473-09242561

Notes: CV Axle Assembly

Features:

• GSP New CV Axle's are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride.

Position: Rear Right

Part Number: 30473-09204157

Notes: CV Axle Assembly

Features:

• GSP New CV Axle's are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride.

Position: Front Right

Part Number: 30473-07353746

Notes: GSP

Position: Front Left