2006 Mercury Grand Marquis Ball Joint

Part Number: 18707-07609954

Notes: Chassis

Position: Front Lower

Part Number: 18707-07320349

Notes: Severe Duty

Position: Front Lower

Part Number: 18707-07332865

Notes: Suspension Ball Joint

Features:

• Meets or exceeds OEM specifications
• Rigorous quality control measures
• 12-month SKP limited warranty

Position: Front Lower

Part Number: 18707-05050350

Notes: Suspension Ball Joint

Features:

• Hardened ball stud made of OE equivalent or better materials to withstand higher loads
• Patent pending dust boot with encapsulated Belleville washer help control axial and radial movement
• Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
• Larger grease reservoir and easy-to-install pre-tapped grease fitting hole for improved maintenance
• Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
• Premium forged housing with increased cross section of up to 52% more material in key areas

Position: Front Lower

Part Number: 18707-05050350

Notes: Suspension Ball Joint -- Problem Solver - Powdered Metal Gusher Bearing For Better Lubrication; New Pre-Installed Integral Dust Boot Eases Installation; New And Original Designs Can Be Installed

Features:

• Hardened ball stud made of OE equivalent or better materials to withstand higher loads
• Patent pending dust boot with encapsulated Belleville washer help control axial and radial movement
• Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
• Larger grease reservoir and easy-to-install pre-tapped grease fitting hole for improved maintenance
• Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
• Premium forged housing with increased cross section of up to 52% more material in key areas

Position: Front Lower

Part Number: 18707-05268076

Notes: Suspension Ball Joint -- Problem Solver - Powdered Metal Gusher Bearing For Better Lubrication; Stamped Steel Arm

Features:

• Patent pending dust boot with encapsulated Belleville washer help control axial and radial movement
• Hardened ball stud made of OE equivalent or better materials to withstand higher loads
• Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
• Premium forged housing with increased cross section of up to 52% more material in key areas
• Larger grease reservoir and easy-to-install pre-tapped grease fitting hole for improved maintenance
• Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
• Castle Nut Included

Position: Front Upper

Part Number: 18707-05268076

Notes: Suspension Ball Joint -- Stamped Steel Arm

Features:

• Patent pending dust boot with encapsulated Belleville washer help control axial and radial movement
• Hardened ball stud made of OE equivalent or better materials to withstand higher loads
• Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
• Premium forged housing with increased cross section of up to 52% more material in key areas
• Larger grease reservoir and easy-to-install pre-tapped grease fitting hole for improved maintenance
• Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
• Castle Nut Included

Position: Front Upper

Part Number: 18707-05086562

Notes: Suspension Ball Joint

Position: Front Lower

Part Number: 18707-05459080

Notes: Suspension Ball Joint

Position: Front Lower

Part Number: 18707-05127112

Notes: Suspension Ball Joint -- For Forged Arm

Position: Front Upper

Part Number: 18707-05362642

Notes: Suspension Ball Joint -- Original Grade

Position: Front Lower

Part Number: 18707-05362675

Notes: Suspension Ball Joint -- Original Grade. For Forged Arm

Position: Front Upper

Part Number: W0133-1847364

Notes: 3/36 Warranty

Features:

• Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
• Low friction plastic bearings that enhance damping and reliability
• Manufactured using forged or cold formed steel
• Two-seat design is standard, and eliminates the need for a spring
• Top of the ball pins are polished
• Salt Spray Test (240hrs)
• Dynamic Test and Elasticity Test
• Original Equipment quality hardware installation accessories

Position: Front Lower

Part Number: 18707-07343891

Notes: Premium XL Extended Life

Position: Front Lower

Part Number: 18707-05666747

Notes: Suspension Ball Joint

Position: Front Lower

Part Number: 18707-07541045

Notes: Suspension Ball Joint -- from Dec 6/05; With Stamped Steel Control Arms

Position: Front Upper

Part Number: 18707-07947793

Notes: Suspension Ball Joint -- used on Forged Control Arm; up to Dec 13/05

Position: Front Upper

Part Number: 18707-05408554

Notes: Advantage -- New

Position: Front Lower

Part Number: 18707-05468231

Notes: Advantage -- New

Position: Front Upper

Part Number: 18707-05622709

Notes: Advantage -- New; For Forged Arm

Position: Front Upper

Part Number: 18707-05554261

Notes: C-TEK Standard

Position: Front Lower

Part Number: 18707-05554266

Notes: C-TEK Standard -- Forged Arm

Position: Front Upper

Part Number: 18707-05734081

Notes: C-TEK Standard -- Stamped Arm

Position: Front Upper

Part Number: 18707-05553906

Notes: Premium Steering and Suspension

Position: Front Lower

Part Number: 18707-05553911

Notes: Premium Steering and Suspension -- Forged Arm

Position: Front Upper

Part Number: 18707-05553922

Notes: Premium Steering and Suspension -- Stamped Arm

Position: Front Upper

Part Number: 18707-05815332

Notes: Suspension Ball Joint

Features:

• Designed for OE fit and function
• Premium boot keeps out contaminants
• Replacement helps restore vehicle handling
• Heavy duty gauge steel construction for strength and durability
• QuickSteer chassis parts are designed and tested to restore steering and handling to their original performance.

Position: Front Lower

Part Number: 18707-07770176

Notes: Suspension Ball Joint -- Front; Driver or Passenger Side; Lower

Position: Front Lower

Part Number: 18707-07936775

Notes: Suspension Ball Joint -- Front; Lower

Position: Front Lower

Part Number: 18707-05700378

Notes: Suspension Ball Joint

Features:

• Delphi ball joints manufactured with high quality forgings for increased strength and smooth operation
• Ball joints utilize chloroprene rubber boots which improves durability, preventing premature failure
• Delphi machines to micron tolerances to guarantee durability and smooth joint operation
• Anti-corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Position: Front Lower

Part Number: 18707-05817314

Notes: Suspension Ball Joint -- with Stamped Steel Arm

Position: Front Upper

Part Number: 18707-05048264

Notes: Suspension Ball Joint

Position: Front Lower

Part Number: 18707-05407971

Notes: Professional -- New

Position: Front Lower