2003 Honda Element Oil Filter

Part Number: 7014-03187853

Manufacturer Part Number: PS-1010

Notes: High Flow Oil Filter -- H-3.75 in.; OD 2.69 in.; M20 x 1.5 Thread; psi Relief Valve 11-17; Pro-Series Oil Filter Without Wrench Off Nut

Features:

• Provides Better Engine Performance
• Reduces Oil Filter Restriction
• Handles All Grades Of Synthetic Motor Oils
• Handles All Grades Of Conventional Motor Oils
• Uses A Pleated Filtration Media
• Increased Capacity
• Outstanding Filtration

Part Number: 7014-03018332

Manufacturer Part Number: HP-1010

Notes: Performance Gold Oil Filter -- H-3.75 in.; PD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17; Premium Oil Filter With Wrench Off Nut

Features:

• Double Air Flow
• Adds Up To 15 Extra Horsepower
• Positive Seal
• Heavy-Duty Construction
• Maximum Filtering Surface
• Prevent Filter Collapse
• Eliminates Dry Starts
• Leak-Proof Double Roll Seam

Part Number: 7014-07687666

Notes: Distance Plus Oil Filter

Features:

• Advanced synthetic fiber media catches and holds more dirt compared to conventional oil filters to protect the life of the engine
• Silicone anti-drainback valve protects engine against dry starts and provides for longer life even at extreme temperatures
• Heavy gauge steel base plate and case provides 2x's greater burst resistance strength and increased durability
• PTFE synthetic gasket helps with the ease of installation and provides longer life
• Spiral-wound center tube provides greater strength than traditional linear seamed tubes

Part Number: 7014-05122399

Notes: Premium Oil Filter

Features:

• Exclusive media technology screens out more harmful contaminants for greater engine protection
• Strong steel base plates and housings prevent warpage, leaks and poor fit
• Silicone anti-drain back valve ensures supply of clean oil when the car is started
• High lubricity gasket design provides a tight seal, yet easy removal
• Metal spiral-wound center tube reinforces internal strength for durability

Part Number: W0133-2078288

Notes: Workshop

Part Number: 7014-09117640

Notes: Workshop Oil Filter

Features:

• Exclusive media technology screens out more harmful contaminants for greater engine protection
• Stronger steel baseplates and housings prevent warpage, leaks and poor fit
• Silicone anti-drain back valve (where applicable) ensures a supply of clean oil when you start your car
• High lubricity gasket design provides a tight seal, yet easy removal
• Double-locked rolled seam forms a leak free canister

Part Number: 7014-03493142

Notes: Extra Guard -- Spin-on Oil Filter

Features:

• FRAM Extra Guard® Oil Filters with SureGrip® deliver advanced engine protection for everyday drivers who perform routine oil changes at OE recommended intervals. Extra Guard is engineered for extended performance that meets all manufacturers' recommended change intervals. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
• SureGrip® anti-slip texture makes changing FRAM® oil filters quick and easy

Part Number: 7014-03493143

Notes: Tough Guard -- Spin-on Oil Filter

Features:

• FRAM Tough Guard® Oil Filters with SureGrip® deliver premium high mileage engine protection for today's passenger cars and light duty trucks. Tough Guard provides premium engine protection for drivers in stop-and-go traffic and the durability to withstand tougher driving conditions and towing. Top quality engineering makes it an ideal pairing for any oil type. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
• SureGrip® anti-slip texture makes changing FRAM® oil filters quick and easy

Part Number: 7014-03493144

Notes: Ultra Synthetic -- Spin-on Oil Filter

Features:

• FRAM Ultra Synthetic® Oil Filters with SureGrip® is the proven leader in ultimate engine protection for today's cars and light duty trucks. Ultra Synthetic is engineered for drivers who require maximum engine protection and use synthetic motor oils for extended 20,000 mile change intervals. This high capacity, high efficiency filter delivers peak performance. No matter what you drive, or what motor oil you use, FRAM® has a filter for you.
• SureGrip® anti-slip texture makes changing FRAM® oil filters quick and easy

Part Number: 7014-07319022

Notes: ProTUNE

Part Number: 7014-07639254

Notes: ProTUNE Extended

Part Number: 7014-07471574

Notes: Engine Oil Filter

Part Number: 7014-07635943

Notes: Standard Life

Part Number: 7014-09117238

Notes: Engine Oil Filter -- Manufacturer OE Recommended Oil Change Intervals

Features:

• Light Duty

Part Number: 7014-05437419

Notes: Engine Oil Filter -- Manufacturer OE Recommended Oil Change Intervals; Best for Synthetic Motor Oils

Features:

• Light Duty

Part Number: 7014-03631193

Notes: Engine Oil Filter -- Oil Drain Intervals of up to 5000 miles

Part Number: W0133-1636234

Notes: Spin-On

Product Remark: Ht=85mm / Dia=69mm

Part Number: W0133-1625932

Notes: Spin-On

Product Remark: Ht=85mm / Dia=69mm

Features:

• OE Equivalent and a direct fit replacement.
• Spin-on type filters incorporate an automatic safety relief valve to protect the engine.
• OE quality filter media.
• High temperature and pressure tested.

Part Number: 7014-05587557

Notes: Engine Oil Filter

Part Number: 7014-05383985

Notes: Standard Life

Part Number: 7014-05048195

Notes: Engine Oil Filter

Features:

• Tested and retested under extreme conditions, Motorcraft filters are also the only filters recommended for Ford, Lincoln and Mercury vehicles.
• Helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal
• 80% efficiency on particles 20 microns and larger.
• Cellulose and polyester blend media is formulated for high capacity and strength.
• Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged.
• Location of pressure-relief valves helps minimize the chance of contaminated oil circulating back into the engine.
• Steel cases are ironed for a precise fit, fluted to ease removal and painted to resist rust.
• Anti-drain back valves made of silicone provide greater cold/heat resistance.
• Show More
• Show Less

Part Number: 7014-05155333

Notes: Engine Oil Filter

Features:

• Tested and retested under extreme conditions, Motorcraft filters are also the only filters recommended for Ford, Lincoln and Mercury vehicles.
• Helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal
• 80% efficiency on particles 20 microns and larger.
• Cellulose and polyester blend media is formulated for high capacity and strength.
• Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged.
• Location of pressure-relief valves helps minimize the chance of contaminated oil circulating back into the engine.
• Steel cases are ironed for a precise fit, fluted to ease removal and painted to resist rust.
• Anti-drain back valves made of silicone provide greater cold/heat resistance.
• Show More
• Show Less

Part Number: W0133-1699069

Notes: Spin-On

Part Number: 7014-05458397

Notes: Engine Oil Filter -- Spin-on Oil Filter

Part Number: 7014-05041787

Notes: Engine Oil Filter

Features:

• Lube Spin-on

Part Number: 7014-05569387

Notes: FTF Engine Oil Filter

Part Number: W0133-2078084

Notes: First Time Fit

Product Remark: Spin-On

Features:

• Heavy-duty steel case resists distortion
• Pre-lubricated molded o-ring provides superior sealing over generic filters
• Unique Torque Stopper design prevents leaks from under torquing
• Dual-layer filtration media for greater oil filtration
• Silicone anti-drainback valve prevents rough starts
• Traps contaminants for increased engine protection

Part Number: 7014-05007694

Notes: Gold -- New

Part Number: 7014-05411684

Notes: Professional Durapack - Pack of 12 -- New

Part Number: W0133-2035819

Notes: Spin-On

Product Remark: Ht=85mm / Dia=69mm

Features:

• Designed for conventional oil change intervals
• Equipped with by-pass and anti-drain back valve
• Spin-on type filters incorporate an automatic safety relief valve to protect the engine.
• High quality filter paper equivalent to OE.
• Electro-Galvanized material to avoid rust and to withstand high pressures.
• High Temperature and high-stress gasket material.

Part Number: 7014-09227584

Notes: Engine Oil Filter

Part Number: 7014-07528177

Notes: Engine Oil Filter -- Conventional Media; OEM Replacement

Position: Main

Part Number: 7014-07797210

Notes: Engine Oil Filter -- Extended Interval Media; Synthetic Oil Change; Best For Use With Synthetic Oil

Position: Main

Part Number: 7014-07885526

Notes: Engine Oil Filter -- Velocity Option

Position: Main

Part Number: 7014-05835806

Notes: Engine Oil Filter -- Spin-On

Part Number: 7014-05808051

Notes: Engine Oil Filter -- New Version: 3 1/4" H x 2 1/2" W

Part Number: 7014-07575711

Notes: Engine Oil Filter -- Spin-on Oil Filter

Part Number: W0133-2338344

Notes: Standard

Product Remark: Red

Part Number: W0133-2357395

Notes: Red Master Pack

Part Number: W0133-1704752

Notes: Spin-On

Part Number: W0133-1636234

Part Number: W0133-1917761

Notes: Classic

Product Remark: 5K Service

Part Number: 7014-03641157

Notes: Engine Oil Filter -- FRAM HIGH PERFORMANCE; High Performance Spin-on Oil Filter

Features:

• FRAM Racing® Oil Filters are optimized for both racing and high performance street cars, and are compatible with all oil types. These filters deliver performance-enhancing features to support operating high-performance vehicles with engines put under tremendous pressure. FRAM Racing Oil Filters are compatible with all oil types.
• SureGrip® anti-slip texture makes changing FRAM® oil filters quick and easy

Part Number: 7014-05585242

Notes: Engine Oil Filter -- Manufacturer OE Recommended Oil Change Intervals; Master Pack Version

Features:

• Light Duty