1999 GMC C2500 Brake Master Cylinder

Part Number: 3839-09047336

Notes: Brake Master Cylinder -- Bore: 1.125 In.; With Vacuum Booster; With Power Brakes

Features:

• Constructed to match the casting material of the original part and ensure similar performance
• All rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
• 100% new - made entirely of new materials, not remanufactured, to ensure highest quality and safety
• Made to meet rigorous SAE International standards

Part Number: 3839-05509172

Notes: Brake Master Cylinder -- Bore: 1.25 In.; With Hydraulic Booster

Features:

• Constructed to match the casting material of the original part and ensure similar performance
• All rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
• 100% new - made entirely of new materials, not remanufactured, to ensure highest quality and safety
• Made to meet rigorous SAE International standards

Part Number: 3839-05723004

Notes: New -- Bore 1-1/4in; With Single Bore Master Cylinder

Features:

• PG Plus Professional Grade Master Cylinders

Part Number: 3839-05723005

Notes: New -- Step Bore

Features:

• PG Plus Professional Grade Master Cylinders

Part Number: 3839-05101330

Notes: Brake Master Cylinder -- with Brake Code JB6; Reservoir Included; GM Brake Codes are on the "Service Parts Identification" sticker.

Features:

• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure
• Castings feature a premium protective coating to minimize corrosion and extend unit life
• Mounting hardware and bleeding kits are supplied with every unit to make the installation and bleeding process faster and easier (where applicable)
• Only O.E.-quality seals and cups are used to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications
• Plastic reservoirs are vacuum-tested to ensure they are leak free
• Seals are temperature-cycled from -30°F to +220°F to ensure reliable performance during your daily commute

Part Number: 3839-09000117

Notes: Brake Master Cylinder -- with Brake Code JB6; Reservoir Included; GM Brake Codes are on the "Service Parts Identification" sticker.

Features:

• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable)
• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure
• Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life
• Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance
• Plastic reservoirs are vacuum-tested to ensure they are leak free
• Show More
• Show Less

Part Number: 3839-05101372

Notes: Brake Master Cylinder -- with Brake Code JB7; Reservoir Included; GM Brake Codes are on the "Service Parts Identification" sticker.

Features:

• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure
• Castings feature a premium protective coating to minimize corrosion and extend unit life
• Mounting hardware and bleeding kits are supplied with every unit to make the installation and bleeding process faster and easier (where applicable)
• Only O.E.-quality seals and cups are used to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications
• Plastic reservoirs are vacuum-tested to ensure they are leak free
• Seals are temperature-cycled from -30°F to +220°F to ensure reliable performance during your daily commute

Part Number: 3839-09000151

Notes: Brake Master Cylinder -- with Brake Code JB7; Reservoir Included; GM Brake Codes are on the "Service Parts Identification" sticker.

Features:

• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable)
• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure
• Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life
• Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance
• Plastic reservoirs are vacuum-tested to ensure they are leak free
• Show More
• Show Less

Part Number: 3839-05101372

Notes: Brake Master Cylinder -- with Brake Code JD6; Reservoir Included; GM Brake Codes are on the "Service Parts Identification" sticker.

Features:

• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure
• Castings feature a premium protective coating to minimize corrosion and extend unit life
• Mounting hardware and bleeding kits are supplied with every unit to make the installation and bleeding process faster and easier (where applicable)
• Only O.E.-quality seals and cups are used to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications
• Plastic reservoirs are vacuum-tested to ensure they are leak free
• Seals are temperature-cycled from -30°F to +220°F to ensure reliable performance during your daily commute

Part Number: 3839-09000151

Notes: Brake Master Cylinder -- with Brake Code JD6; Reservoir Included; GM Brake Codes are on the "Service Parts Identification" sticker.

Features:

• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable)
• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure
• Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life
• Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance
• Plastic reservoirs are vacuum-tested to ensure they are leak free
• Show More
• Show Less

Part Number: 3839-05101372

Notes: Brake Master Cylinder -- with Brake Code JD7; Reservoir Included; GM Brake Codes are on the "Service Parts Identification" sticker.

Features:

• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure
• Castings feature a premium protective coating to minimize corrosion and extend unit life
• Mounting hardware and bleeding kits are supplied with every unit to make the installation and bleeding process faster and easier (where applicable)
• Only O.E.-quality seals and cups are used to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications
• Plastic reservoirs are vacuum-tested to ensure they are leak free
• Seals are temperature-cycled from -30°F to +220°F to ensure reliable performance during your daily commute

Part Number: 3839-09000151

Notes: Brake Master Cylinder -- with Brake Code JD7; Reservoir Included; GM Brake Codes are on the "Service Parts Identification" sticker.

Features:

• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable)
• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure
• Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life
• Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance
• Plastic reservoirs are vacuum-tested to ensure they are leak free
• Show More
• Show Less

Part Number: 3839-07944964

Notes: Brake Master Cylinder -- Vacuum Power Brakes

Part Number: 3839-07314312

Notes: Brake Master Cylinder

Part Number: 3839-07363287

Notes: Brake Master Cylinder -- with 6 Lug Wheels; without Hydroboost Brake System; without Hydroboost

Part Number: 3839-07519921

Notes: GM Original Equipment -- New; Hydraulic Power Brakes; MOUNTED TO BOOSTER ASSEMBLY

Part Number: 3839-07519921

Notes: GM Original Equipment -- New; MOUNTED TO BOOSTER ASSEMBLY

Part Number: 3839-07519921

Notes: GM Original Equipment -- New; Vacuum Power Brakes, POLICE PACKAGE (Z56), CHASSIS PERFORMANCE PACKAGE (Z60); MOUNTED TO BOOSTER ASSEMBLY

Part Number: W0133-2047339

Notes: Gold DuraStop - w/ 13" Rear Brakes

Part Number: W0133-2047338

Notes: Gold DuraStop - w/ Vacuum Booster, 11-5/32 in x 2-3/4 in Brake

Part Number: 3839-05404223

Notes: Professional -- New; Bore 1-1/4in; With Single Bore Master Cylinder

Part Number: 3839-05404202

Notes: Professional -- New; Step Bore

Part Number: 3839-05025450

Notes: C-TEK Standard Brake Master Cylinder

Features:

• Delivers required force for effective braking
• Facilitates easy engaging and disengaging of the brake shoes
• Manufactured under high quality standards
• Highly durable and reliable
• Features O.E. fit design

Part Number: 3839-05025307

Notes: Premium Master Cylinder-Preferred

Part Number: 3839-07891838

Notes: Brake Master Cylinder -- Hydraulic Power Brakes

Part Number: 3839-05369692

Notes: Brake Master Cylinder Reservoir Cap and Gasket Kit

Features:

• Direct replacement - this brake master cylinder reservoir cap kit matches the original parts to repair a damaged or leaking master cylinder reservoir cap on specified vehicles
• Ideal solution - this kit is a reliable replacement for original components that are leaking or have failed due to wear
• Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience

Part Number: 3839-05966811

Notes: DFC Brake Master Cylinder

Part Number: 3839-07404152

Notes: Brake Master Cylinder -- Except Hydro Boost; 1-1/8" Bore

Features:

• Extensive field testing
• Install Wagner with total confidence
• Provides longer brake life and performance
• Innovative engineering
• Exceptional quality control

Part Number: 3839-07824449

Notes: Brake Master Cylinder -- Hydroboost; 1-1/4" Bore

Features:

• Innovative engineering
• Exceptional quality control
• Install Wagner with total confidence
• Extensive field testing
• Provides longer brake life and performance