Edelbrock Camshaft and Lifter Kit - Performer RPM Camshaft Kit - Hyd. - 1500-6500rpm - Adv. Dur. at 0.050 Int / Exh 240 / 240 Deg. - Lift at Valve Int / Exh .0560 / 0.573 in. - Lobe Seps 112 Deg. - Intake Center Line 110 Deg.;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

(Read reviews)

Part Number: 4071-03642431

Notes: Performer RPM Camshaft Kit; Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int / Exh 240 / 240 Deg.; Lift at Valve Int / Exh .0560 / 0.573 in.; Lobe Seps 112 Deg.; Intake Center Line 110 Deg.;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

Detailed Notes: Not For 65-66 Chevy Big Block Requiring A Grooved Rear Cam Journal~ Idle Vacuum at 1000 RPM - 10 inch~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Produces 540hp and 530 ft.-lbs. When Matched w / 7163 Intake and 60559 Heads

Features:

10 To 12 in. Of Manifold Vacuum At Idle
Designed for 1500 to 6500 RPM Performance
Dyno-Matched/Street-Proven Performance
Includes Hydraulic Lifters and Assembly Lube
Matched to Edelbrock Performer RPM Intakes
Maximum Power in High-RPM with Good Low-End Torque
More Lift And Duration Than Most Street Camshafts
Take the Guesswork Out of Camshaft Selection!

Condition: New

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: F

Vehicle	Engine
1993 GMC K2500	7.4L V8

(Read reviews)

Part Number: 4071-03642431

Features:

10 To 12 in. Of Manifold Vacuum At Idle
Designed for 1500 to 6500 RPM Performance
Dyno-Matched/Street-Proven Performance
Includes Hydraulic Lifters and Assembly Lube
Matched to Edelbrock Performer RPM Intakes
Maximum Power in High-RPM with Good Low-End Torque
More Lift And Duration Than Most Street Camshafts
Take the Guesswork Out of Camshaft Selection!

Condition: New

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: F

Vehicle	Engine
1993 GMC K2500	7.4L V8

Edelbrock Camshaft and Lifter Kit - Performer-Plus Camshaft Kit - Off-Idle to 5500rpm - Adv. Dur. at 0.050 Int / Exh 194 / 214 Deg - Lift at Valve Int / Exh 0.398 / 0.442 in. - Lobe Seps 112 Deg. Intake Center Line 107 Deg.;CARB E.O. D-215-19

(Read reviews)

Part Number: 4071-03133486

Notes: Performer-Plus Camshaft Kit; Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int / Exh 194 / 214 Deg; Lift at Valve Int / Exh 0.398 / 0.442 in.; Lobe Seps 112 Deg. Intake Center Line 107 Deg.;CARB E.O. D-215-19

Detailed Notes: Non Roller Applications~ Idle Vacuum at 1000 RPM - 16 inch~ 50 State Legal~ Produces 245 ft.-lbs. When Matched w / 3712 Intake And Stock Heads

Features:

Designed for Optimum Torque and Acceleration
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Matched to Edelbrock Performer Intakes
Maximum Performance From Idle through Mid-Range
Take the Guesswork Out of Camshaft Selection!
Use For Daily Drivers/Trucks/Vans/RVs/4x4s

Condition: New

Shipping Options:
Ground

This Part Fits:

Catalog: F

Vehicle	Engine
1993 GMC K2500	5.0L V8 Chevrolet
1993 GMC K2500	5.7L V8 Chevrolet

Edelbrock Camshaft and Lifter Kit - Performer-Plus Camshaft Kit - Off-Idle to 5500rpm - Adv. Dur. at 0.050 Int / Exh 218 / 228 Deg. - Lift at Valve Int / Exh 0.500 in. - Lobe Seps 114 Deg. - Intake Center Line 109 Deg.;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

(Read reviews)

Part Number: 4071-03133457

Notes: Performer-Plus Camshaft Kit; Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int / Exh 218 / 228 Deg.; Lift at Valve Int / Exh 0.500 in.; Lobe Seps 114 Deg.; Intake Center Line 109 Deg.;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

Detailed Notes: Not For 65-66 Chevy Big Block Requiring A Grooved Rear Cam Journal~ Idle Vacuum at 1000 RPM - 15 inch~ Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Produces 470 ft.-lbs When Matched w / 2161 Intake And Stock Heads

Features:

Designed for Optimum Torque and Acceleration
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Matched to Edelbrock Performer Intakes
Maximum Performance From Idle through Mid-Range
Take the Guesswork Out of Camshaft Selection!
Use For Daily Drivers/Trucks/Vans/RVs/4x4s

Condition: New

Shipping Options:
Ground

This Part Fits:

Catalog: F

Vehicle	Engine
1993 GMC K2500	7.4L V8

Competition Cams Camshaft and Lifter Kit - High Energy Camshaft / Lifter Kit - Hyd Flat Tappet;1200-5200rpm;Adv.Dur. 260 Int. / Exh.;V.Lift .475 Int. / Exh.;Lobe 110 deg.;Incl. Cam / Lifters

(Read reviews)

Part Number: 4071-03306354

Notes: High Energy Camshaft / Lifter Kit; Hyd Flat Tappet;1200-5200rpm;Adv.Dur. 260 Int. / Exh.;V.Lift .475 Int. / Exh.;Lobe 110 deg.;Incl. Cam / Lifters

Detailed Notes: Stock Springs Cannot Be Used~ Not Legal For Sale Or Use On Pollution-Controlled Motor Vehicle

Features:

1 Year Limited Warranty
Can Be Used w/Most Stock Components
For Street Applications w/Lower Compression Ratios
High Torque Cams

Condition: New

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: F

Vehicle	Engine
1993 GMC K2500	7.4L V8

Competition Cams Camshaft and Lifter Kit - High Energy Camshaft / Lifter Kit - Hyd Flat Tappet;1500-5500rpm;Adv.Dur. 268 Int. / Exh.;V.Lift .485 Int. / Exh.;Lobe 110 deg.;Incl. Cam / Lifters

(Read reviews)

Part Number: 4071-03306811

Notes: High Energy Camshaft / Lifter Kit; Hyd Flat Tappet;1500-5500rpm;Adv.Dur. 268 Int. / Exh.;V.Lift .485 Int. / Exh.;Lobe 110 deg.;Incl. Cam / Lifters

Detailed Notes: Stock Springs Cannot Be Used~ Not Legal For Sale Or Use On Pollution-Controlled Motor Vehicle

Features:

1 Year Limited Warranty
Can Be Used w/Most Stock Components
For Street Applications w/Lower Compression Ratios
High Torque Cams

Condition: New

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: F

Vehicle	Engine
1993 GMC K2500	7.4L V8

Competition Cams Camshaft and Lifter Kit - Magnum Camshaft / Lifter Kit - Hyd Flat Tappet;1500-5800rpm;Adv.Dur. 270 Int. / Exh.;V.Lift .510 Int. / Exh.;Lobe 110 deg.;Incl. Cam - Lifters

(Read reviews)

Part Number: 4071-03306839

Notes: Magnum Camshaft / Lifter Kit; Hyd Flat Tappet;1500-5800rpm;Adv.Dur. 270 Int. / Exh.;V.Lift .510 Int. / Exh.;Lobe 110 deg.;Incl. Cam; Lifters

Detailed Notes: Stock Springs Cannot Be Used~ Not Legal For Sale Or Use On Pollution-Controlled Motor Vehicle

Features:

1 Year Limited Warranty
Cams Are Very Aggressive
Deliver More Power Than Standard Camshafts
Designed For Performance Oriented Vehicles

Condition: New

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: F

Vehicle	Engine
1993 GMC K2500	7.4L V8

Competition Cams Camshaft and Lifter Kit - Magnum Camshaft / Lifter Kit - Hyd Flat Tappet;2000-6000rpm;Adv.Dur. 280 Int. / Exh.;V.Lift .520 Int. / Exh.;Lobe 110 deg.;Incl. Cam - Lifters

(Read reviews)

Part Number: 4071-03306744

Notes: Magnum Camshaft / Lifter Kit; Hyd Flat Tappet;2000-6000rpm;Adv.Dur. 280 Int. / Exh.;V.Lift .520 Int. / Exh.;Lobe 110 deg.;Incl. Cam; Lifters

Detailed Notes: Stock Springs Cannot Be Used~ Not Legal For Sale Or Use On Pollution-Controlled Motor Vehicle

Features:

1 Year Limited Warranty
Cams Are Very Aggressive
Deliver More Power Than Standard Camshafts
Designed For Performance Oriented Vehicles

Condition: New

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: F

Vehicle	Engine
1993 GMC K2500	7.4L V8

Competition Cams Camshaft and Lifter Kit - Mutha Thumpr Camshaft / Lifter Kit - Retro-Fit Hyd. Flat Tappet - 2000-5900rpm - Adv. Dur. 287 Int. / 305 Exh. - Valve Lift .510 Int. / .495 Exh. - Lobe Angle 107 deg. - Incl. Cam / Lifters

(Read reviews)

Part Number: 4071-03306671

Notes: Mutha Thumpr Camshaft / Lifter Kit; Retro-Fit Hyd. Flat Tappet; 2000-5900rpm; Adv. Dur. 287 Int. / 305 Exh.; Valve Lift .510 Int. / .495 Exh.; Lobe Angle 107 deg.; Incl. Cam / Lifters

Features:

1 Year Limited Warranty
3 Grinds To Fit All Of Your Performance Needs
Camshaft And Lifter Kit
Delivers Real Seat Of The Pants Performance
Designed For Use w/Latest In ValveTrain Components
Excellent Horsepower Gains And Broad Torque Curve
Long Exhaust Duration
Produces A Powerful Hard-Hitting Exhaust Note

Condition: New

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: F

Vehicle	Engine
1993 GMC K2500	7.4L V8

Competition Cams Camshaft and Lifter Kit - Thumpr Camshaft / Lifter Kit - Retro-Fit Hyd. Roller - 1900-5600rpm - Adv.Dur. 283 Int. / 303 Exh. - V.Lift .513 Int / .498 Exh. - Lobe Angle 107 deg. - Incl. Cam / Lifters

(Read reviews)

Part Number: 4071-03306126

Notes: Thumpr Camshaft / Lifter Kit; Retro-Fit Hyd. Roller; 1900-5600rpm; Adv.Dur. 283 Int. / 303 Exh.; V.Lift .513 Int / .498 Exh.; Lobe Angle 107 deg.; Incl. Cam / Lifters

Features:

1 Year Limited Warranty
3 Grinds To Fit All Of Your Performance Needs
Camshaft And Lifter Kit
Delivers Real Seat Of The Pants Performance
Designed For Use w/Latest In ValveTrain Components
Excellent Horsepower Gains And Broad Torque Curve
Long Exhaust Duration
Produces A Powerful Hard-Hitting Exhaust Note

Condition: New

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: F

Vehicle	Engine
1993 GMC K2500	5.0L V8
1993 GMC K2500	5.7L V8

Competition Cams Camshaft and Lifter Kit - Xtreme Energy Camshaft / Lifter Kit - Hyd Flat Tappet;1600-5800rpm;Adv.Dur. 268 Int. / 280 Exh.;V.Lift .515 Int. / .520 Exh.;Lobe 110 deg.;Incl. Cams;Lifters

(Read reviews)

Part Number: 4071-03306710

Notes: Xtreme Energy Camshaft / Lifter Kit; Hyd Flat Tappet;1600-5800rpm;Adv.Dur. 268 Int. / 280 Exh.;V.Lift .515 Int. / .520 Exh.;Lobe 110 deg.;Incl. Cams;Lifters

Detailed Notes: Stock Springs Cannot Be Used~ Not Legal For Sale Or Use On Pollution-Controlled Motor Vehicle

Features:

1 Year Limited Warranty
Delivers Increased Engine Vacuum
Produces Better Throttle Response
Produces Top Engine Horsepower

Condition: New

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: F

Vehicle	Engine
1993 GMC K2500	7.4L V8

Competition Cams Camshaft and Lifter Kit - Xtreme Energy Camshaft / Lifter Kit - Hyd Flat Tappet;1800-6000rpm;Adv.Dur. 274 Int. / 286 Exh.;V.Lift .552 Int. / .555 Exh.;Lobe 110 deg.;Incl. Cams;Lifters

(Read reviews)

Part Number: 4071-03306421

Notes: Xtreme Energy Camshaft / Lifter Kit; Hyd Flat Tappet;1800-6000rpm;Adv.Dur. 274 Int. / 286 Exh.;V.Lift .552 Int. / .555 Exh.;Lobe 110 deg.;Incl. Cams;Lifters

Detailed Notes: Stock Springs Cannot Be Used~ Not Legal For Sale Or Use On Pollution-Controlled Motor Vehicle

Features:

1 Year Limited Warranty
Delivers Increased Engine Vacuum
Produces Better Throttle Response
Produces Top Engine Horsepower

Condition: New

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: F

Vehicle	Engine
1993 GMC K2500	7.4L V8

DNJ Rock Camshaft

(Read reviews)

Part Number: 4071-07264948

Notes: Engine Camshaft -- Stock

Condition: New

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 VIN: K Chevrolet 16Valve OHV

Melling Camshaft

(Read reviews)

Part Number: 4071-07507403

Notes: Performance -- Class 1, Good Idle With Low RPM Torque And Mid Range Performance; For Use With Retro-Fit Roller Lifters BB817RF16 And BB969RF16; Advertised Intake Duration 288; Advertised Exhaust Duration 300; Hydraulic Camshaft

Features:

High Performance Camshaft
Class I camshaft (200°-215°). Good idle quality. Low rpm torque and mid range performance. Will work with stock or slightly modified engine. Manual or auto transmission. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic Roller

Exhaust Valve Lift 0.510 in

Intake Valve Lift 0.501 in

Exhaust Duration at .050 inch Lift 228 deg

Intake Duration at .050 Inch Lift 216 deg

Advertised Exhaust Duration 300 deg

Advertised Intake Duration 288 deg

Basic Operating RPM Range 2800 RPM

Cam Type Hydraulic Roller

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .867 in

Intake Valve Lift with Factory Rocker Arm Ratio .851 in

Lobe Separation 112 deg

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	7.4L V8

Melling Camshaft

(Read reviews)

Part Number: 4071-07930425

Notes: Performance -- Class 1, Good Idle With Low RPM Torque And Mid Range Performance; For Use With Retro-Fit Roller Lifters SB817RF16 And SB079RF16; Advertised Intake Duration 284; Advertised Exhaust Duration 310; Hydraulic Camshaft

Features:

High Performance Camshaft
Class I camshaft (200°-215°). Good idle quality. Low rpm torque and mid range performance. Will work with stock or slightly modified engine. Manual or auto transmission. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic Roller

Exhaust Valve Lift 0.480 in

Intake Valve Lift 0.470 in

Exhaust Duration at .050 inch Lift 230 deg

Intake Duration at .050 Inch Lift 215 deg

Advertised Exhaust Duration 310 deg

Advertised Intake Duration 284 deg

Basic Operating RPM Range 2800 RPM

Cam Type Hydraulic Roller

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .720 in

Intake Valve Lift with Factory Rocker Arm Ratio .705 in

Lobe Separation 110 deg

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.0L V8
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07582134

Notes: Performance -- Class 2, Fair Idle With Good Low To Mid Range Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 261; Advertised Exhaust Duration 276; Hydraulic Camshaft

Features:

High Performance Camshaft
Class II camshaft (215°-230°). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic Roller

Exhaust Valve Lift 0.450 in

Intake Valve Lift 0.433 in

Exhaust Duration at .050 inch Lift 206 deg

Intake Duration at .050 Inch Lift 197 deg

Advertised Exhaust Duration 276 deg

Advertised Intake Duration 261 deg

Basic Operating RPM Range 2200 RPM

Cam Type Hydraulic Roller

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .675 in

Intake Valve Lift with Factory Rocker Arm Ratio .649 in

Lobe Separation 110 deg

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07859489

Notes: Performance -- Class 2, Fair Idle With Good Low To Mid Range Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 287; Advertised Exhaust Duration 287; Hydraulic Camshaft

Features:

High Performance Camshaft
Class II camshaft (215°-230°). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic

Exhaust Valve Lift 0.444 in

Intake Valve Lift 0.444 in

Exhaust Duration at .050 inch Lift 214 deg

Intake Duration at .050 Inch Lift 214 deg

Advertised Exhaust Duration 287 deg

Advertised Intake Duration 287 deg

Basic Operating RPM Range 2800 RPM

Cam Type Hydraulic Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .666 in

Intake Valve Lift with Factory Rocker Arm Ratio .666 in

Lobe Separation 110 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07641395

Notes: Performance -- Class 2, Fair Idle With Good Low To Mid Range Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 290; Advertised Exhaust Duration 290; Hydraulic Camshaft

Features:

High Performance Camshaft
Class II camshaft (215°-230°). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic

Exhaust Valve Lift 0.447 in

Intake Valve Lift 0.447 in

Exhaust Duration at .050 inch Lift 223 deg

Intake Duration at .050 Inch Lift 223 deg

Advertised Exhaust Duration 290 deg

Advertised Intake Duration 290 deg

Basic Operating RPM Range 3000 RPM

Cam Type Hydraulic Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .670 in

Intake Valve Lift with Factory Rocker Arm Ratio .670 in

Lobe Separation 114 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07231536

Notes: Performance -- Class 2, Fair Idle With Good Low To Mid Range Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 291; Advertised Exhaust Duration 287; Hydraulic Camshaft

Features:

High Performance Camshaft
Class II camshaft (215°-230°). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic

Exhaust Valve Lift 0.460 in

Intake Valve Lift 0.450 in

Exhaust Duration at .050 inch Lift 224 deg

Intake Duration at .050 Inch Lift 224 deg

Advertised Exhaust Duration 287 deg

Advertised Intake Duration 291 deg

Basic Operating RPM Range 3000 RPM

Cam Type Hydraulic Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .690 in

Intake Valve Lift with Factory Rocker Arm Ratio .675 in

Lobe Separation 114 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07573080

Notes: Performance -- Class 2, Fair Idle With Good Low To Mid Range Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 292; Advertised Exhaust Duration 302; Hydraulic Camshaft

Features:

High Performance Camshaft
Class II camshaft (215°-230°). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic

Exhaust Valve Lift 0.528 in

Intake Valve Lift 0.503 in

Exhaust Duration at .050 inch Lift 224 deg

Intake Duration at .050 Inch Lift 214 deg

Advertised Exhaust Duration 302 deg

Advertised Intake Duration 292 deg

Basic Operating RPM Range 2800 RPM

Cam Type Hydraulic Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .897 in

Intake Valve Lift with Factory Rocker Arm Ratio .855 in

Lobe Separation 112 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	7.4L V8

Melling Camshaft

(Read reviews)

Part Number: 4071-07743597

Notes: Performance -- Class 2, Fair Idle With Good Low To Mid Range Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 293; Advertised Exhaust Duration 293; Hydraulic Camshaft

Features:

High Performance Camshaft
Class II camshaft (215°-230°). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic

Exhaust Valve Lift 0.503 in

Intake Valve Lift 0.503 in

Exhaust Duration at .050 inch Lift 214 deg

Intake Duration at .050 Inch Lift 214 deg

Advertised Exhaust Duration 293 deg

Advertised Intake Duration 293 deg

Basic Operating RPM Range 2800 RPM

Cam Type Hydraulic Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .855 in

Intake Valve Lift with Factory Rocker Arm Ratio .855 in

Lobe Separation 114 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	7.4L V8

Melling Camshaft

(Read reviews)

Part Number: 4071-07723078

Notes: Performance -- Class 2, Fair Idle With Good Low To Mid Range Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 297; Advertised Exhaust Duration 307; Hydraulic Camshaft

Features:

High Performance Camshaft
Class II camshaft (215°-230°). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic Roller

Exhaust Valve Lift 0.501 in

Intake Valve Lift 0.478 in

Exhaust Duration at .050 inch Lift 232 deg

Intake Duration at .050 Inch Lift 222 deg

Advertised Exhaust Duration 307 deg

Advertised Intake Duration 297 deg

Basic Operating RPM Range 3000 RPM

Cam Type Hydraulic Roller

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .751 in

Intake Valve Lift with Factory Rocker Arm Ratio .717 in

Lobe Separation 114 deg

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.0L V8
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07485952

Notes: Performance -- Class 2, Fair Idle With Good Low To Mid Range Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 304; Advertised Exhaust Duration 287; Hydraulic Camshaft

Features:

High Performance Camshaft
Class II camshaft (215°-230°). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic

Exhaust Valve Lift 0.480 in

Intake Valve Lift 0.468 in

Exhaust Duration at .050 inch Lift 231 deg

Intake Duration at .050 Inch Lift 220 deg

Advertised Exhaust Duration 287 deg

Advertised Intake Duration 304 deg

Basic Operating RPM Range 3000 RPM

Cam Type Hydraulic Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .720 in

Intake Valve Lift with Factory Rocker Arm Ratio .702 in

Lobe Separation 110 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07713997

Notes: Performance -- Class 2, Fair Idle With Good Low To Mid Range Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 310; Advertised Exhaust Duration 325; Hydraulic Camshaft

Features:

High Performance Camshaft
Class II camshaft (215°-230°). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic

Exhaust Valve Lift 0.505 in

Intake Valve Lift 0.500 in

Exhaust Duration at .050 inch Lift 235 deg

Intake Duration at .050 Inch Lift 222 deg

Advertised Exhaust Duration 325 deg

Advertised Intake Duration 310 deg

Basic Operating RPM Range 3000 RPM

Cam Type Hydraulic Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .858 in

Intake Valve Lift with Factory Rocker Arm Ratio .850 in

Lobe Separation 115 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	7.4L V8

Melling Camshaft

(Read reviews)

Part Number: 4071-07615358

Notes: Performance -- Class 2, Fair Idle With Good Low To Mid Range Torque And Horsepower; Lower Engine Vacuum Than Stock; For Use With Retro-Fit Roller Lifters BB817RF16 And BB969RF16; Advertised Intake Duration 296; Advertised Exhaust Duration 308; Hydraulic Camshaft

Features:

High Performance Camshaft
Class II camshaft (215°-230°). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic Roller

Exhaust Valve Lift 0.544 in

Intake Valve Lift 0.527 in

Exhaust Duration at .050 inch Lift 234 deg

Intake Duration at .050 Inch Lift 224 deg

Advertised Exhaust Duration 308 deg

Advertised Intake Duration 296 deg

Basic Operating RPM Range 3000 RPM

Cam Type Hydraulic Roller

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .924 in

Intake Valve Lift with Factory Rocker Arm Ratio .895 in

Lobe Separation 110 deg

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	7.4L V8

Melling Camshaft

(Read reviews)

Part Number: 4071-07780533

Notes: Performance -- Class 2, Fair Idle With Good Low To Mid Range Torque And Horsepower; Lower Engine Vacuum Than Stock; For Use With Retro-Fit Roller Lifters SB817RF16 And SB079RF16; Advertised Intake Duration 284; Advertised Exhaust Duration 284; Hydraulic Camshaft

Features:

High Performance Camshaft
Class II camshaft (215°-230°). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic Roller

Exhaust Valve Lift 0.470 in

Intake Valve Lift 0.470 in

Exhaust Duration at .050 inch Lift 215 deg

Intake Duration at .050 Inch Lift 215 deg

Advertised Exhaust Duration 284 deg

Advertised Intake Duration 284 deg

Basic Operating RPM Range 2800 RPM

Cam Type Hydraulic Roller

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .705 in

Intake Valve Lift with Factory Rocker Arm Ratio .705 in

Lobe Separation 110 deg

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.0L V8
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07645646

Features:

High Performance Camshaft
Class II camshaft (215°-230°). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic Roller

Exhaust Valve Lift 0.490 in

Intake Valve Lift 0.470 in

Exhaust Duration at .050 inch Lift 224 deg

Intake Duration at .050 Inch Lift 215 deg

Advertised Exhaust Duration 296 deg

Advertised Intake Duration 284 deg

Basic Operating RPM Range 2800 RPM

Cam Type Hydraulic Roller

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .735 in

Intake Valve Lift with Factory Rocker Arm Ratio .705 in

Lobe Separation 112 deg

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.0L V8
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07337391

Notes: Performance -- Class 3, Rough Idle With Mid To High RPM Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 288; Advertised Exhaust Duration 288; Hydraulic Camshaft

Features:

High Performance Camshaft
Class III camshaft (230°-245°). Rough idle quality. Good mid to high rpm torque and horsepower. For use with manual transmission or high stall automatic. May need improved carb, exhaust system, and ignition system. Combination street and drag. Will have lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic

Exhaust Valve Lift 0.480 in

Intake Valve Lift 0.480 in

Exhaust Duration at .050 inch Lift 232 deg

Intake Duration at .050 Inch Lift 232 deg

Advertised Exhaust Duration 288 deg

Advertised Intake Duration 288 deg

Basic Operating RPM Range 3500 RPM

Cam Type Hydraulic Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .720 in

Intake Valve Lift with Factory Rocker Arm Ratio .720 in

Lobe Separation 108 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07317581

Notes: Performance -- Class 3, Rough Idle With Mid To High RPM Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 298; Advertised Exhaust Duration 304; Hydraulic Camshaft

Features:

High Performance Camshaft
Class III camshaft (230°-245°). Rough idle quality. Good mid to high rpm torque and horsepower. For use with manual transmission or high stall automatic. May need improved carb, exhaust system, and ignition system. Combination street and drag. Will have lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic

Exhaust Valve Lift 0.488 in

Intake Valve Lift 0.466 in

Exhaust Duration at .050 inch Lift 234 deg

Intake Duration at .050 Inch Lift 234 deg

Advertised Exhaust Duration 304 deg

Advertised Intake Duration 298 deg

Basic Operating RPM Range 3500 RPM

Cam Type Hydraulic Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .732 in

Intake Valve Lift with Factory Rocker Arm Ratio .699 in

Lobe Separation 112 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07720873

Notes: Performance -- Class 3, Rough Idle With Mid To High RPM Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 302; Advertised Exhaust Duration 308; Hydraulic Camshaft

Features:

High Performance Camshaft
Class III camshaft (230°-245°). Rough idle quality. Good mid to high rpm torque and horsepower. For use with manual transmission or high stall automatic. May need improved carb, exhaust system, and ignition system. Combination street and drag. Will have lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic

Exhaust Valve Lift 0.552 in

Intake Valve Lift 0.528 in

Exhaust Duration at .050 inch Lift 234 deg

Intake Duration at .050 Inch Lift 224 deg

Advertised Exhaust Duration 308 deg

Advertised Intake Duration 302 deg

Basic Operating RPM Range 3000 RPM

Cam Type Hydraulic Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .938 in

Intake Valve Lift with Factory Rocker Arm Ratio .897 in

Lobe Separation 114 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	7.4L V8

Melling Camshaft

(Read reviews)

Part Number: 4071-07519244

Notes: Performance -- Class 3, Rough Idle With Mid To High RPM Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 303; Advertised Exhaust Duration 313; Hydraulic Camshaft

Features:

High Performance Camshaft
Class III camshaft (230°-245°). Rough idle quality. Good mid to high rpm torque and horsepower. For use with manual transmission or high stall automatic. May need improved carb, exhaust system, and ignition system. Combination street and drag. Will have lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic

Exhaust Valve Lift 0.508 in

Intake Valve Lift 0.488 in

Exhaust Duration at .050 inch Lift 244 deg

Intake Duration at .050 Inch Lift 234 deg

Advertised Exhaust Duration 313 deg

Advertised Intake Duration 303 deg

Basic Operating RPM Range 3500 RPM

Cam Type Hydraulic Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .762 in

Intake Valve Lift with Factory Rocker Arm Ratio .732 in

Lobe Separation 112 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07512505

Notes: Performance -- Class 3, Rough Idle With Mid To High RPM Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 304; Advertised Exhaust Duration 304; Hydraulic Camshaft

Features:

High Performance Camshaft
Class III camshaft (230°-245°). Rough idle quality. Good mid to high rpm torque and horsepower. For use with manual transmission or high stall automatic. May need improved carb, exhaust system, and ignition system. Combination street and drag. Will have lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic

Exhaust Valve Lift 0.453 in

Intake Valve Lift 0.453 in

Exhaust Duration at .050 inch Lift 230 deg

Intake Duration at .050 Inch Lift 230 deg

Advertised Exhaust Duration 304 deg

Advertised Intake Duration 304 deg

Basic Operating RPM Range 3500 RPM

Cam Type Hydraulic Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .679 in

Intake Valve Lift with Factory Rocker Arm Ratio .679 in

Lobe Separation 114 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07562024

Notes: Performance -- Class 3, Rough Idle With Mid To High RPM Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 309; Advertised Exhaust Duration 309; Hydraulic Camshaft

Features:

High Performance Camshaft
Class III camshaft (230°-245°). Rough idle quality. Good mid to high rpm torque and horsepower. For use with manual transmission or high stall automatic. May need improved carb, exhaust system, and ignition system. Combination street and drag. Will have lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic

Exhaust Valve Lift 0.513 in

Intake Valve Lift 0.513 in

Exhaust Duration at .050 inch Lift 230 deg

Intake Duration at .050 Inch Lift 230 deg

Advertised Exhaust Duration 309 deg

Advertised Intake Duration 309 deg

Basic Operating RPM Range 3500 RPM

Cam Type Hydraulic Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .872 in

Intake Valve Lift with Factory Rocker Arm Ratio .872 in

Lobe Separation 110 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	7.4L V8

Melling Camshaft

(Read reviews)

Part Number: 4071-07362269

Notes: Performance -- Class 3, Rough Idle With Mid To High RPM Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 310; Advertised Exhaust Duration 297; Hydraulic Camshaft

Features:

High Performance Camshaft
Class III camshaft (230°-245°). Rough idle quality. Good mid to high rpm torque and horsepower. For use with manual transmission or high stall automatic. May need improved carb, exhaust system, and ignition system. Combination street and drag. Will have lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Solid

Exhaust Valve Lift 0.520 in

Intake Valve Lift 0.520 in

Exhaust Duration at .050 inch Lift 242 deg

Intake Duration at .050 Inch Lift 242 deg

Advertised Exhaust Duration 297 deg

Advertised Intake Duration 310 deg

Basic Operating RPM Range 4000 RPM

Cam Type Mechanical Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .884 in

Intake Valve Lift with Factory Rocker Arm Ratio .884 in

Lobe Separation 114 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	7.4L V8

Melling Camshaft

(Read reviews)

Part Number: 4071-07883901

Notes: Performance -- Class 4, Rough Idle With Mid To High RPM Torque And Horsepower; Will Not Have Enough Vacuum To Operate Power Accessories; Advertised Intake Duration 282; Advertised Exhaust Duration 290; Mechanical Camshaft

Features:

High Performance Camshaft
Class IV camshaft (245°-UP). Rough idle quality. Mid to high rpm torque and horsepower. For serious racing. Need proper selection of rear axle ration and improvements in carburation and exhaust system. For use with manual transmission or automatic with very high stall converter. Will not have enough vacuum for power accessories. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Solid

Exhaust Valve Lift 0.521 in

Intake Valve Lift 0.521 in

Exhaust Duration at .050 inch Lift 250 deg

Intake Duration at .050 Inch Lift 240 deg

Advertised Exhaust Duration 290 deg

Advertised Intake Duration 282 deg

Basic Operating RPM Range 4000 RPM

Cam Type Mechanical Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lash .024 in

Exhaust Valve Lift with Factory Rocker Arm Ratio .781 in

Intake Valve Lash .024 in

Intake Valve Lift with Factory Rocker Arm Ratio .781 in

Lobe Separation 106 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07475672

Notes: Performance -- Class 4, Rough Idle With Mid To High RPM Torque And Horsepower; Will Not Have Enough Vacuum To Operate Power Accessories; Advertised Intake Duration 290; Advertised Exhaust Duration 298; Mechanical Camshaft

Features:

High Performance Camshaft
Class IV camshaft (245°-UP). Rough idle quality. Mid to high rpm torque and horsepower. For serious racing. Need proper selection of rear axle ration and improvements in carburation and exhaust system. For use with manual transmission or automatic with very high stall converter. Will not have enough vacuum for power accessories. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Solid

Exhaust Valve Lift 0.556 in

Intake Valve Lift 0.538 in

Exhaust Duration at .050 inch Lift 266 deg

Intake Duration at .050 Inch Lift 258 deg

Advertised Exhaust Duration 298 deg

Advertised Intake Duration 290 deg

Basic Operating RPM Range 4500 RPM

Cam Type Mechanical Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lash .026 in

Exhaust Valve Lift with Factory Rocker Arm Ratio .834 in

Intake Valve Lash .026 in

Intake Valve Lift with Factory Rocker Arm Ratio .807 in

Lobe Separation 100 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07709007

Notes: Performance -- Class 4, Rough Idle With Mid To High RPM Torque And Horsepower; Will Not Have Enough Vacuum To Operate Power Accessories; Advertised Intake Duration 294; Advertised Exhaust Duration 294; Mechanical Camshaft

Features:

High Performance Camshaft
Class IV camshaft (245°-UP). Rough idle quality. Mid to high rpm torque and horsepower. For serious racing. Need proper selection of rear axle ration and improvements in carburation and exhaust system. For use with manual transmission or automatic with very high stall converter. Will not have enough vacuum for power accessories. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Solid

Exhaust Valve Lift 0.484 in

Intake Valve Lift 0.484 in

Exhaust Duration at .050 inch Lift 254 deg

Intake Duration at .050 Inch Lift 254 deg

Advertised Exhaust Duration 294 deg

Advertised Intake Duration 294 deg

Basic Operating RPM Range 4500 RPM

Cam Type Mechanical Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lash .030 in

Exhaust Valve Lift with Factory Rocker Arm Ratio .726 in

Intake Valve Lash .030 in

Intake Valve Lift with Factory Rocker Arm Ratio .726 in

Lobe Separation 114 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07977067

Notes: Performance -- Class 4, Rough Idle With Mid To High RPM Torque And Horsepower; Will Not Have Enough Vacuum To Operate Power Accessories; Advertised Intake Duration 302; Advertised Exhaust Duration 302; Hydraulic Camshaft

Features:

High Performance Camshaft
Class IV camshaft (245°-UP). Rough idle quality. Mid to high rpm torque and horsepower. For serious racing. Need proper selection of rear axle ration and improvements in carburation and exhaust system. For use with manual transmission or automatic with very high stall converter. Will not have enough vacuum for power accessories. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic

Exhaust Valve Lift 0.508 in

Intake Valve Lift 0.508 in

Exhaust Duration at .050 inch Lift 246 deg

Intake Duration at .050 Inch Lift 246 deg

Advertised Exhaust Duration 302 deg

Advertised Intake Duration 302 deg

Basic Operating RPM Range 4000 RPM

Cam Type Hydraulic Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .762 in

Intake Valve Lift with Factory Rocker Arm Ratio .762 in

Lobe Separation 109 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07732074

Notes: Performance -- Class 4, Rough Idle With Mid To High RPM Torque And Horsepower; Will Not Have Enough Vacuum To Operate Power Accessories; Advertised Intake Duration 304; Advertised Exhaust Duration 320; Mechanical Camshaft

Features:

High Performance Camshaft
Class IV camshaft (245°-UP). Rough idle quality. Mid to high rpm torque and horsepower. For serious racing. Need proper selection of rear axle ration and improvements in carburation and exhaust system. For use with manual transmission or automatic with very high stall converter. Will not have enough vacuum for power accessories. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Solid

Exhaust Valve Lift 0.512 in

Intake Valve Lift 0.494 in

Exhaust Duration at .050 inch Lift 270 deg

Intake Duration at .050 Inch Lift 257 deg

Advertised Exhaust Duration 320 deg

Advertised Intake Duration 304 deg

Basic Operating RPM Range 4500 RPM

Cam Type Mechanical Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lash .024 in

Exhaust Valve Lift with Factory Rocker Arm Ratio .768 in

Intake Valve Lash .022 in

Intake Valve Lift with Factory Rocker Arm Ratio .741 in

Lobe Separation 112 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07593805

Notes: Performance -- Class 4, Rough Idle With Mid To High RPM Torque And Horsepower; Will Not Have Enough Vacuum To Operate Power Accessories; Advertised Intake Duration 313; Advertised Exhaust Duration 328; Hydraulic Camshaft

Features:

High Performance Camshaft
Class IV camshaft (245°-UP). Rough idle quality. Mid to high rpm torque and horsepower. For serious racing. Need proper selection of rear axle ration and improvements in carburation and exhaust system. For use with manual transmission or automatic with very high stall converter. Will not have enough vacuum for power accessories. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic

Exhaust Valve Lift 0.533 in

Intake Valve Lift 0.508 in

Exhaust Duration at .050 inch Lift 254 deg

Intake Duration at .050 Inch Lift 244 deg

Advertised Exhaust Duration 328 deg

Advertised Intake Duration 313 deg

Basic Operating RPM Range 4000 RPM

Cam Type Hydraulic Flat Tappet

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .799 in

Intake Valve Lift with Factory Rocker Arm Ratio .762 in

Lobe Separation 112 deg

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07930725

Notes: Performance -- Class 4, Rough Idle With Mid To High RPM Torque And Horsepower; Will Not Have Enough Vacuum To Operate Power Accessories; For Use With Retro-Fit Roller Lifter BB969RF16; Advertised Exhaust Duration 305; Advertised Exhaust Duration 310; Hydraulic Roller Camshaft

Features:

High Performance Camshaft
Class IV camshaft (245°-UP). Rough idle quality. Mid to high rpm torque and horsepower. For serious racing. Need proper selection of rear axle ration and improvements in carburation and exhaust system. For use with manual transmission or automatic with very high stall converter. Will not have enough vacuum for power accessories. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Retro-Fit Hyd. Roller

Exhaust Valve Lift 0.572 in

Intake Valve Lift 0.559 in

Exhaust Duration at .050 inch Lift 246 deg

Intake Duration at .050 Inch Lift 241 deg

Advertised Exhaust Duration 310 deg

Advertised Intake Duration 305 deg

Basic Operating RPM Range 4000 RPM

Cam Type Hydraulic Roller

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .972 in

Intake Valve Lift with Factory Rocker Arm Ratio .950 in

Lobe Separation 112 deg

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	7.4L V8

Melling Camshaft

(Read reviews)

Part Number: 4071-07458468

Notes: Stock -- OE Stock Replacement Grind

Features:

Melling offers a full line of OE replacement camshafts for cars, light duty, medium duty and heavy duty trucks. Melling listings include OEM applications to match the engine requirements desired including horsepower, economy and needed engine torque. Melling stock replacement camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Title Engine Camshaft

Lifter Type Hydraulic

Exhaust Duration at .050 inch Lift 203

Intake Duration at .050 Inch Lift 193

Advertised Exhaust Duration 280

Advertised Intake Duration 268

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	7.4L V8

Melling Camshaft

(Read reviews)

Part Number: 4071-07434298

Notes: Stock -- OE Stock Replacement Grind

Features:

Melling offers a full line of OE replacement camshafts for cars, light duty, medium duty and heavy duty trucks. Melling listings include OEM applications to match the engine requirements desired including horsepower, economy and needed engine torque. Melling stock replacement camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Title Engine Camshaft

Lifter Type Hydraulic

Exhaust Duration at .050 inch Lift 194

Intake Duration at .050 Inch Lift 176

Advertised Exhaust Duration 259

Advertised Intake Duration 244

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.0L V8 OHV

Melling Camshaft and Lifter Kit

(Read reviews)

Part Number: 4071-07543022

Notes: Stock -- OE Stock Replacement Grind

Features:

New Melling lifters should always be part of a new camshaft installation. To make selection of the desired combination of camshaft and lifters easier, Melling offers camshaft / lifter kits that provide the camshaft and correct lifter combinations for your engine application. Melling camshaft kits include the camshaft, lifters and a 4 oz container of Melling-lube.

Condition: New

Title Engine Camshaft And Lifter Kit

Lifter Type Hydraulic

Exhaust Duration at .050 inch Lift 202

Intake Duration .050 Inch Lift 194

Advertised Exhaust Duration 269

Advertised Intake Duration 258

Lobe Separation 112

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 VIN: K OHV GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07640411

Notes: Stock -- OE Stock Replacement Grind

Features:

Melling offers a full line of OE replacement camshafts for cars, light duty, medium duty and heavy duty trucks. Melling listings include OEM applications to match the engine requirements desired including horsepower, economy and needed engine torque. Melling stock replacement camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Title Engine Camshaft

Lifter Type Hydraulic

Exhaust Duration at .050 inch Lift 202

Intake Duration at .050 Inch Lift 194

Advertised Exhaust Duration 269

Advertised Intake Duration 258

Shipping Options:
Ground

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 VIN: K OHV GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07803397

Notes: Stock -- OE Stock Replacement Grind; Engines Without Balance Shaft

Features:

Melling offers a full line of OE replacement camshafts for cars, light duty, medium duty and heavy duty trucks. Melling listings include OEM applications to match the engine requirements desired including horsepower, economy and needed engine torque. Melling stock replacement camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Title Engine Camshaft

Lifter Type Hydraulic

Exhaust Duration at .050 inch Lift 195

Intake Duration at .050 Inch Lift 179

Advertised Exhaust Duration 262

Advertised Intake Duration 252

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	4.3L V6 VIN: Z

Cloyes Camshaft - 0.030 in. Thick - Steel

(Read reviews)

Part Number: 4071-03309004

Notes: 0.030 in. Thick; Steel

Features:

Heat Treated For Durability
Prevent Cam From Walking
Provides Good Anti-Friction Surface

Condition: New

Shipping Options:
Ground

This Part Fits:

Catalog: F

Vehicle	Engine
1993 GMC K2500	7.4L V8

Melling Camshaft

(Read reviews)

Part Number: 4071-07400309

Notes: Performance -- Class 2, Fair Idle With Good Low To Mid Range Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 283; Advertised Exhaust Duration 287; Hydraulic Camshaft

Features:

High Performance Camshaft
Class II camshaft (215°-230°). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Lifter Type Hydraulic Roller

Exhaust Valve Lift 0.502 in

Intake Valve Lift 0.495 in

Exhaust Duration at .050 inch Lift 224 deg

Intake Duration at .050 Inch Lift 220 deg

Advertised Exhaust Duration 287 deg

Advertised Intake Duration 283 deg

Basic Operating RPM Range 3000 RPM

Cam Type Hydraulic Roller

Computer Controlled Compatible No

Exhaust Valve Lift with Factory Rocker Arm Ratio .753 in

Intake Valve Lift with Factory Rocker Arm Ratio .742 in

Lobe Separation 110 deg

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	5.7L V8 GAS

Melling Camshaft

(Read reviews)

Part Number: 4071-07543136

Notes: Stock -- OE Stock Replacement Grind

Features:

Melling offers a full line of OE replacement camshafts for cars, light duty, medium duty and heavy duty trucks. Melling listings include OEM applications to match the engine requirements desired including horsepower, economy and needed engine torque. Melling stock replacement camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Condition: New

Title Engine Camshaft

Lifter Type Roller

Exhaust Duration at .050 inch Lift 202

Intake Duration at .050 Inch Lift 178

Advertised Intake Duration 178

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: C

Vehicle	Engine
1993 GMC K2500	6.2L V8 VIN: C
1993 GMC K2500	6.2L V8 VIN: J
1993 GMC K2500	6.5L V8 Turbocharged OHV DIESEL

Competition Cams Camshaft Kit - Magnum Camshaft Kit - Hyd Flat Tappet;2000-6000rpm;Adv.Dur. 280 Int. / Exh.;V.Lift .520 Int. / Exh.;Lobe 110 deg.;Incl.Cam;Lifter;V.Sprng / Ret. / Lock / Seal;Timing Set

(Read reviews)

Part Number: 4071-03306604

Notes: Magnum Camshaft Kit; Hyd Flat Tappet;2000-6000rpm;Adv.Dur. 280 Int. / Exh.;V.Lift .520 Int. / Exh.;Lobe 110 deg.;Incl.Cam;Lifter;V.Sprng / Ret. / Lock / Seal;Timing Set

Detailed Notes: Not Legal For Sale Or Use On Pollution-Controlled Motor Vehicle

Features:

1 Year Limited Warranty
Cams Are Very Aggressive
Deliver More Power Than Standard Camshafts
Designed For Performance Oriented Vehicles

Condition: New

Shipping Options:
Free Ground Shipping

This Part Fits:

Catalog: F

Vehicle	Engine
1993 GMC K2500	7.4L V8