1993 GMC C7000 Topkick Brake Master Cylinder

Part Number: 25841-05750276

Notes: New -- with 11000lb Front Axle; 12,000 Pound Axle

Features:

• PG Plus Professional Grade Master Cylinders

Part Number: 25841-05750075

Notes: New -- with 8100lb Front Axle

Features:

• PG Plus Professional Grade Master Cylinders

Part Number: 25841-05364478

Notes: Brake Master Cylinder -- with 11000 lb Front Axle; with Brake Code JE3; Reservoir Included

Features:

• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure
• Castings feature a premium protective coating to minimize corrosion and extend unit life
• Mounting hardware and bleeding kits are supplied with every unit to make the installation and bleeding process faster and easier (where applicable)
• Only O.E.-quality seals and cups are used to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications
• Plastic reservoirs are vacuum-tested to ensure they are leak free
• Seals are temperature-cycled from -30°F to +220°F to ensure reliable performance during your daily commute

Part Number: 25841-09000310

Notes: Brake Master Cylinder -- with 11000 lb Front Axle; with Brake Code JE3; Reservoir Included; GM Brake Codes are on the "Service Parts Identification" sticker.

Features:

• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable)
• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure
• Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life
• Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance
• Plastic reservoirs are vacuum-tested to ensure they are leak free
• Show More
• Show Less

Part Number: 25841-05364478

Notes: Brake Master Cylinder -- with 12000 lb Front Axle; with Brake Code JE3; Reservoir Included

Features:

• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure
• Castings feature a premium protective coating to minimize corrosion and extend unit life
• Mounting hardware and bleeding kits are supplied with every unit to make the installation and bleeding process faster and easier (where applicable)
• Only O.E.-quality seals and cups are used to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications
• Plastic reservoirs are vacuum-tested to ensure they are leak free
• Seals are temperature-cycled from -30°F to +220°F to ensure reliable performance during your daily commute

Part Number: 25841-09000310

Notes: Brake Master Cylinder -- with 12000 lb Front Axle; with Brake Code JE3; Reservoir Included; GM Brake Codes are on the "Service Parts Identification" sticker.

Features:

• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable)
• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure
• Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life
• Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance
• Plastic reservoirs are vacuum-tested to ensure they are leak free
• Show More
• Show Less

Part Number: 25841-09132781

Notes: Brake Master Cylinder -- with FL1 8100 lb Front Axle; with Brake Code JE3; Reservoir Included; GM Brake Codes are on the "Service Parts Identification" sticker.

Features:

• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable)
• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure
• Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life
• Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance
• Plastic reservoirs are vacuum-tested to ensure they are leak free
• Show More
• Show Less

Part Number: 25841-05509024

Notes: Brake Master Cylinder -- Bore: 2 In.; With RPO Code FL2 (11,000 Lb. Capacity Front Axle); With RPO Code FS7 (12,000 Lb. Capacity Front Axle)

Features:

• Constructed to match the casting material of the original part and ensure similar performance
• All rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
• 100% new - made entirely of new materials, not remanufactured, to ensure highest quality and safety
• Made to meet rigorous SAE International standards

Part Number: 25841-05544577

Notes: Brake Master Cylinder -- With Disc Brakes; Bore: 1.75 In.; With RPO Code FL1 (8,100 Lb. Capacity Front Axle)

Features:

• Constructed to match the casting material of the original part and ensure similar performance
• All rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
• 100% new - made entirely of new materials, not remanufactured, to ensure highest quality and safety
• Made to meet rigorous SAE International standards

Part Number: 25841-05348891

Notes: Premium Master Cylinder-Preferred -- Bendix Front Calipers; Disc Brakes

Part Number: 25841-05348890

Notes: Premium Master Cylinder-Preferred -- Dayton Calipers; Disc Brakes

Part Number: 25841-07618755

Notes: Professional -- New; with 11000lb Front Axle; 12,000 Pound Axle

Part Number: 25841-07344976

Notes: Professional -- New; with 8100lb Front Axle