1993 Ford F150 Camshaft

Part Number: 5310-03644704

Notes: Performer RPM Camshaft Kit; Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int / Exh 224 / 234 Deg.; Lift at Valve Int / Exh 0.496 / 0.520 in.; Lobe Seps 110 Deg.; Intake Center Line 106 Deg.;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

Detailed Notes: Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 400hp and 412ft.-lbs When Matched w / 7181 Intake and 60259 Heads

Features:

• 10 To 12 in. Of Manifold Vacuum At Idle
• Designed for 1500 to 6500 RPM Performance
• Dyno-Matched/Street-Proven Performance
• Includes Hydraulic Lifters and Assembly Lube
• Matched to Edelbrock Performer RPM Intakes
• Maximum Power in High-RPM with Good Low-End Torque
• More Lift And Duration Than Most Street Camshafts
• Take the Guesswork Out of Camshaft Selection!

Part Number: 5310-03644700

Notes: Performer RPM Camshaft Kit; Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int / Exh 224 / 234 Deg.; Lift at Valve Int / Exh 0.496 / 0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

Detailed Notes: Not For 1985 And Later Engines w / Roller Lifters~ Idle Vacuum at 1000 RPM - 11 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 367hp and 304ft.-lbs. When Matched w / 7121 Manifold and 60259 Heads~ Screw-In Studs / Guide Plates / Adj. Rocker Arms Required

Features:

• 10 To 12 in. Of Manifold Vacuum At Idle
• Designed for 1500 to 6500 RPM Performance
• Dyno-Matched/Street-Proven Performance
• Includes Hydraulic Lifters and Assembly Lube
• Matched to Edelbrock Performer RPM Intakes
• Maximum Power in High-RPM with Good Low-End Torque
• More Lift And Duration Than Most Street Camshafts
• Take the Guesswork Out of Camshaft Selection!

Part Number: 5310-03133855

Notes: Performer-Plus Camshaft Kit; Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int / Exh 204 / 214 Deg.; Lift at Valve Int / Exh 0.448 / 0.472 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

Detailed Notes: Idle Vacuum at 1000 RPM - 16 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Produces 310hp and 260 ft.-lbs. When Matched w / 2121 Intake / 60329 Heads

Features:

• Designed for Optimum Torque and Acceleration
• Includes Hydraulic Lifters and Assembly Lube
• Major Improvement in Throttle Response and Torque
• Matched to Edelbrock Performer Intakes
• Maximum Performance From Idle through Mid-Range
• Take the Guesswork Out of Camshaft Selection!
• Use For Daily Drivers/Trucks/Vans/RVs/4x4s

Part Number: 5310-03133942

Notes: Performer-Plus Camshaft Kit; Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int / Exh. 204 / 214 Deg.; Lift at Valve Int / Exh. 0.448 / 0.472 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

Detailed Notes: Idle Vacuum at 1000 RPM - 15 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 325 ft.-lbs. When Matched w / 2181 Intake and Stock Heads

Features:

• Designed for Optimum Torque and Acceleration
• Includes Hydraulic Lifters and Assembly Lube
• Major Improvement in Throttle Response and Torque
• Matched to Edelbrock Performer Intakes
• Maximum Performance From Idle through Mid-Range
• Take the Guesswork Out of Camshaft Selection!
• Use For Daily Drivers/Trucks/Vans/RVs/4x4s

Part Number: 5310-03644694

Notes: Rollin Thunder Camshaft; Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int / Exh 220 Deg.; Lift at Valve Int / Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.;CARB E.O. D-215-14

Detailed Notes: May Use Original Hydraulic Roller Lifters~ Idle Vacuum - 13 inch~ 50 State Legal~ Match w / Performer Intake 3821 and Performer Heads 60379~ This Combo Produces 300hp and 325 ft.-lbs. of Torque

Features:

• Designed for Optimum Torque and Acceleration
• Includes Hydraulic Lifters and Assembly Lube
• Major Improvement in Throttle Response and Torque
• Matched to Edelbrock Performer Intakes
• Take the Guesswork Out of Camshaft Selection!
• Use For Daily Drivers/Trucks/Vans/RVs/4x4s
• Without Excessive Valve Overlap

Part Number: 5310-03643504

Notes: Rollin Thunder Camshaft; Hyd Roller; 1500-6500rpm; Adv Dur 299 Int / 302 Exh; Valve Lift 0.573 Int / 0.582Exh; Lobe Angle 112deg; Use Stock Ratio Rocker Arms Only

Detailed Notes: Engine Swaps~ Not Legal For Use On Pollution Controlled Vehicles

Features:

• 10 To 12 in. Of Manifold Vacuum At Idle
• Designed for 1500 to 6500 RPM Performance
• Dyno-Matched/Street-Proven Performance
• Extensive Dyno And Real World Tested
• Matched to Edelbrock Performer RPM Intakes
• More Lift And Duration Than Most Street Camshafts
• Take the Guesswork Out of Camshaft Selection!
• Use Only Stock Ratio Rocker Arms

Part Number: 5310-03644693

Notes: Rollin Thunder Camshaft; Hyd Roller; 1500-6500rpm; Adv Dur at 0.050 Int / Exh 227 / 234 Deg.; Lift at Valve Int / Exh 0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles

Detailed Notes: Idle Vacuum at 1000 RPM - 12 inch~ Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Match w / Pro-Flo 2 System 35210 and Performer PRM Heads 60255~ This Combo Produces 384hp and 347 ft.-lbs Of Torque

Features:

• 10 To 12 in. Of Manifold Vacuum At Idle
• Designed for 1500 to 6500 RPM Performance
• Dyno-Matched/Street-Proven Performance
• Matched to Edelbrock Performer RPM Intakes
• Maximum Power in High-RPM with Good Low-End Torque
• More Lift And Duration Than Most Street Camshafts
• Take the Guesswork Out of Camshaft Selection!
• Use Only Stock Ratio Rocker Arms