1992 GMC C3500 Ball Joint

Part Number: 3881-07368730

Notes: Chassis

Position: Front Upper

Part Number: 3881-07368897

Notes: Chassis -- Without Mono Beam Suspension

Position: Front Lower

Part Number: 3881-07487465

Notes: Severe Duty

Position: Front Upper

Part Number: 3881-07682724

Notes: Severe Duty -- Without Mono Beam Suspension

Position: Front Lower

Part Number: 3881-07623388

Notes: Front; Lower; Driver & Passenger Side

Position: Front Lower

Part Number: 3881-07578638

Notes: Front; Lower; Driver & Passenger Side

Features:

• No modifications, all the parts needed in one kit
• Direct fit - easy install, pre-greased, no maintenance required
• Improved ride comfort and longer life

Position: Front Lower

Part Number: 3881-07339705

Notes: Front; Upper; Driver & Passenger Side

Position: Front Upper

Part Number: 3881-07855119

Notes: Front; Upper; Driver & Passenger Side

Features:

• No modifications, all the parts needed in one kit
• Direct fit - easy install, pre-greased, no maintenance required
• Improved ride comfort and longer life

Position: Front Upper

Part Number: 3881-07680458

Notes: Suspension Ball Joint -- Driver or Passenger Side; Upper

Position: Left

Part Number: 3881-07680458

Notes: Suspension Ball Joint -- Driver or Passenger Side; Upper

Position: Right

Part Number: 3881-07680458

Notes: Suspension Ball Joint -- Driver or Passenger Side; Upper

Position: Upper

Part Number: 3881-07587894

Notes: Suspension Ball Joint -- Front; Driver or Passenger Side; Lower

Position: Front Lower

Part Number: 3881-07069238

Notes: Suspension Ball Joint -- Front; Driver or Passenger Side; Lower

Position: Front Lower

Part Number: 3881-07331908

Notes: Suspension Ball Joint -- Front; Driver or Passenger Side; Upper

Position: Front Upper

Part Number: 3881-07700942

Notes: Suspension Ball Joint -- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces

Features:

• OE Style for easy replacement and fitment

Position: Front Upper

Part Number: 3881-07891196

Notes: Suspension Ball Joint -- Independent Front Suspension

Features:

• OE Style for easy replacement and fitment

Position: Front Lower

Part Number: W0133-2349432

Notes: Premium Problem Solver - Exc. Mono Beam Suspension

Position: Front Lower

Part Number: W0133-2340085

Notes: Premium Problem Solver - Except Mono Beam Suspension

Position: Front Upper

Part Number: 3881-05049928

Notes: Suspension Ball Joint

Features:

• Greaseable for smoother steering
• Dust boots included
• Designed as stock replacement
• Improves chassis performance and durability

Position: Front Upper

Part Number: 3881-05049928

Notes: Suspension Ball Joint -- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces

Features:

• Greaseable for smoother steering
• Dust boots included
• Designed as stock replacement
• Improves chassis performance and durability

Position: Front Upper

Part Number: 3881-05049963

Notes: Suspension Ball Joint -- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces; Press-In Type; with Independent Front Suspension

Features:

• Greaseable for smoother steering
• Dust boots included
• Designed as stock replacement
• Improves chassis performance and durability

Position: Front Lower

Part Number: 3881-07114350

Notes: Suspension Ball Joint -- Independent Front Suspension

Features:

• Greaseable for smoother steering
• Dust boots included
• Easy to install
• Designed as stock replacement

Position: Front Lower

Part Number: 3881-05049963

Notes: Suspension Ball Joint -- Optional; with Independent Front Suspension

Features:

• Greaseable for smoother steering
• Dust boots included
• Designed as stock replacement
• Improves chassis performance and durability

Position: Front Lower

Part Number: 3881-05408535

Notes: Advantage -- New

Position: Front Lower

Part Number: 3881-05408521

Notes: Advantage -- New

Position: Front Upper

Part Number: W0133-2057862

Notes: Gold (Professional) - Exc. Mono Beam Suspension

Position: Front Lower

Part Number: W0133-2057858

Notes: Gold (Professional) - Except Mono Beam Suspension

Position: Front Upper

Part Number: 3881-05407928

Notes: Professional -- New

Position: Front Lower

Part Number: 3881-05407823

Notes: Professional -- New

Position: Front Upper

Part Number: W0133-2204308

Notes: Silver (Advantage) - Exc. Mono Beam Suspension

Product Remark: US

Position: Front Lower

Part Number: W0133-2204291

Notes: Silver (Advantage) - Except Mono Beam Suspension

Product Remark: US

Position: Front Upper

Part Number: 3881-05362309

Notes: Suspension Ball Joint -- Original Grade

Position: Front Upper

Part Number: 3881-05362293

Notes: Suspension Ball Joint -- Original Grade. with Independent Suspension; Fifth Digit of VIN is C

Position: Front Lower

Part Number: 3881-05044784

Notes: Suspension Ball Joint -- Supreme - Premium Professional Solution; Enhanced greasable metal bearings for increased durability; Improved boot designs prevents contaminants

Features:

• LARGER SPHERE DESIGN: Optimize performance with application-specific ball stud system with larger sphere.
• SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree SAE grease fitting included.
• SUPERIOR TOUGHNESS: Get longer-lasting performance from patented sintered metal bearings.
• INSTALLATION READY: Simply secure ball joint to the vehicle with part specific Castle Nut & Cotter Pin provided.

Position: Front Upper

Part Number: 3881-05044765

Notes: Suspension Ball Joint -- Supreme - Premium Professional Solution; Enhanced greasable metal bearings for increased durability; Improved boot designs prevents contaminants; with Independent Suspension; Fifth Digit of VIN is C

Features:

• SINTERED METAL STRENGTH: Increase durability and extend service life with over-built sintered metal technology.
• INSTALLATION READY: Simply secure ball joint to the vehicle with part specific Castle Nut & Cotter Pin provided.
• TIGHTER GRIP: Avoid distortion and corrosion with knurling that ensures a snugger fit between connecting points.
• SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree SAE grease fitting included.

Position: Front Lower

Part Number: 3881-05886249

Notes: Suspension Ball Joint -- TTX - Extreme Durability; Patented technology; Over-sized greasable metal bearings for maximum service life; Superior boot seal protection

Features:

• LARGER SPHERE DESIGN: Optimize performance with application-specific ball stud system with larger sphere.
• A STRONGER BOND: Keep fasteners secure and vibration resistant with pre-applied Nylok thread adhesive.
• SUPERIOR TOUGHNESS: Get longer-lasting performance from patented sintered metal bearings.
• EXCEPTIONAL FIT AND FUNCTION: Prevent deformation during installation with this ball joint designed with a thicker, stronger flange.
• INSTALLATION READY: Simply secure ball joint to the vehicle with part specific Slotted Castle Nut & Easy Snap Cotter Pin provided.
• SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree SAE grease fitting included.

Position: Front Upper

Part Number: W0133-1686250

Notes: 3/36 Warranty - Exc. Mono Beam Suspension

Features:

• Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
• Low friction plastic bearings that enhance damping and reliability
• Manufactured using forged or cold formed steel
• Two-seat design is standard, and eliminates the need for a spring
• Top of the ball pins are polished
• Salt Spray Test (240hrs)
• Dynamic Test and Elasticity Test
• Original Equipment quality hardware installation accessories

Position: Front Lower

Part Number: W0133-1688628

Notes: 3/36 Warranty - Except Mono Beam Suspension

Features:

• Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
• Low friction plastic bearings that enhance damping and reliability
• Manufactured using forged or cold formed steel
• Two-seat design is standard, and eliminates the need for a spring
• Top of the ball pins are polished
• Salt Spray Test (240hrs)
• Dynamic Test and Elasticity Test
• Original Equipment quality hardware installation accessories

Position: Front Upper

Part Number: 3881-07406747

Notes: Suspension Ball Joint -- Exc.Mono Beam Suspension

Position: Front Upper

Part Number: 3881-05554343

Notes: C-TEK Standard -- Independent Front Suspension

Position: Front Lower

Part Number: 3881-05554346

Notes: C-TEK Standard -- Independent Front Suspension

Position: Front Upper

Part Number: 3881-05554052

Notes: Premium Steering and Suspension -- Independent Front Suspension

Position: Front Upper

Part Number: W0133-1686250

Notes: Exc. Mono Beam Suspension

Features:

• OE expertise and quality
• Precision manufactured housing and components
• Corrosion protection
• Permanently attached boot
• One-piece forged housing for easier steering
• Ball joint kits include new pinch bolt, nut and other necessary parts for attachment

Position: Front Lower

Part Number: W0133-1688628

Notes: Except Mono Beam Suspension

Features:

• OE expertise and quality
• Precision manufactured housing and components
• Corrosion protection
• Permanently attached boot
• One-piece forged housing for easier steering
• Ball joint kits include new pinch bolt, nut and other necessary parts for attachment

Position: Front Upper

Part Number: 3881-05700281

Notes: Suspension Ball Joint

Features:

• Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
• Delphi ball joints manufactured with high quality forgings for increased strength and smooth operation
• Chloroprene rubber boots to improve durability
• Delphi machines to micron tolerances to guarantee durability and smooth joint operation
• Anti-corrosion protection

Position: Front Lower

Part Number: 3881-07762875

Notes: Premium XL Extended Life -- With Independent Front Suspension

Position: Front Lower

Part Number: 3881-07884892

Notes: Premium XL Extended Life -- With Independent Front Suspension; With "C" as the VIN # 5th digit

Position: Front Upper

Part Number: 3881-07565736

Notes: Suspension Ball Joint -- With Independent Front Suspension

Position: Front Lower

Part Number: 3881-07928019

Notes: Suspension Ball Joint -- With Independent Front Suspension; With "C" as the VIN # 5th digit

Position: Front Upper

Part Number: 3881-09250683

Notes: Suspension Ball Joint

Position: Front Upper

Part Number: 3881-09250683

Notes: Suspension Ball Joint -- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces

Position: Front Upper

Part Number: 3881-09250701

Notes: Suspension Ball Joint -- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces; Press-In Type; with Independent Front Suspension

Position: Front Lower

Part Number: 3881-07885534

Notes: Suspension Ball Joint -- Independent Front Suspension

Position: Front Lower

Part Number: 3881-09250701

Notes: Suspension Ball Joint -- Optional; with Independent Front Suspension

Position: Front Lower

Part Number: 3881-05949355

Notes: Suspension Ball Joint

Position: Front Upper

Part Number: 3881-05949332

Notes: Suspension Ball Joint -- with hardware kit

Position: Front Upper

Part Number: W0133-2419802

Notes: Exc. Mono Beam Suspension

Position: Front Lower

Part Number: W0133-4099060

Notes: 3/36 Warranty - Except Mono Beam Suspension

Position: Front Upper

Part Number: 3881-05554049

Notes: Premium Steering and Suspension -- Independent Front Suspension

Position: Front Lower

Part Number: 3881-07031371

Notes: Suspension Ball Joint -- Independent Front Suspension

Features:

• Greaseable for smoother steering
• Dust boots included
• Easy to install
• Designed as stock replacement

Position: Front Lower

Part Number: 3881-05949357

Notes: Suspension Ball Joint

Position: Front Lower

Part Number: 3881-05949357

Notes: Suspension Ball Joint -- Independent Front Suspension

Position: Front Lower

Part Number: 3881-07666288

Notes: Suspension Ball Joint -- Diameter: 45.79mm stud; Exc.Mono Beam Suspension

Position: Front Lower