1992 Chevrolet K1500 Ball Joint

Part Number: 3388-02559530

Notes: 4WD ONLY -- 14 PIECE FRONT SUSPENSION KIT

Product Remark: Includes: (2) Outer Tie Rods, (2) Inner Tie Rods, (2) Upper Ball Joint, (2) Lower Ball Joints, (2) Sway Bar Links, (2) Adjusting Sleeves, (1) Pitman Arm, (1) Idler Arm

Position: Front

Part Number: 3388-07199708

Features:

• No modifications, all the parts needed in one kit
• Direct fit - easy install, pre-greased, no maintenance required
• Improved ride comfort and longer life

Part Number: 3388-07128032

Features:

• No modifications, all the parts needed in one kit
• Direct fit - easy install, pre-greased, no maintenance required
• Improved ride comfort and longer life

Part Number: 3388-07452221

Features:

• No modifications, all the parts needed in one kit
• Direct fit - easy install, pre-greased, no maintenance required
• Improved ride comfort and longer life

Part Number: 3388-07968550

Features:

• No modifications, all the parts needed in one kit
• Direct fit - easy install, pre-greased, no maintenance required
• Improved ride comfort and longer life

Part Number: 3388-07744489

Features:

• No modifications, all the parts needed in one kit
• Direct fit - easy install, pre-greased, no maintenance required
• Improved ride comfort and longer life

Part Number: 3388-07313496

Notes: Front

Features:

• No modifications, all the parts needed in one kit
• Direct fit - easy install, pre-greased, no maintenance required
• Improved ride comfort and longer life

Position: Front

Part Number: 3388-07335144

Notes: Front

Features:

• No modifications, all the parts needed in one kit
• Direct fit - easy install, pre-greased, no maintenance required
• Improved ride comfort and longer life

Position: Front

Part Number: 3388-07433982

Notes: Front; Lower; Driver & Passenger Side

Features:

• No modifications, all the parts needed in one kit
• Direct fit - easy install, pre-greased, no maintenance required
• Improved ride comfort and longer life

Position: Front Lower

Part Number: 3388-07396936

Notes: Front; Upper; Driver & Passenger Side

Features:

• No modifications, all the parts needed in one kit
• Direct fit - easy install, pre-greased, no maintenance required
• Improved ride comfort and longer life

Position: Front Upper

Part Number: 3388-07605975

Notes: Suspension Ball Joint -- Driver or Passenger Side; Lower

Position: Lower

Part Number: 3388-07981626

Notes: Suspension Ball Joint -- Driver or Passenger Side; Lower

Position: Lower

Part Number: 3388-07503559

Notes: Suspension Ball Joint -- Front; Driver or Passenger Side; Upper

Position: Front Upper

Part Number: 3388-07832923

Notes: Upper & Lower; Driver & Passenger Side

Features:

• No modifications, all the parts needed in one kit
• Direct fit - easy install, pre-greased, no maintenance required
• Improved ride comfort and longer life

Part Number: 3388-07824766

Notes: Suspension Ball Joint -- Bolt On Type

Features:

• OE Style for easy replacement and fitment

Position: Front Lower

Part Number: 3388-07852199

Notes: Suspension Ball Joint -- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces

Features:

• OE Style for easy replacement and fitment

Position: Front Upper

Part Number: 3388-07712542

Notes: Chassis

Position: Front Upper

Part Number: 3388-07834869

Notes: Chassis -- Riveted Ball Joint

Position: Front Lower

Part Number: 3388-07390636

Notes: Severe Duty

Position: Front Upper

Part Number: 3388-05421822

Notes: Advantage -- New

Position: Front Lower

Part Number: 3388-05408520

Notes: Advantage -- New

Position: Front Upper

Part Number: W0133-2057863

Notes: Gold (Professional)

Position: Front Lower

Part Number: W0133-2053418

Notes: Gold (Professional)

Position: Front Upper

Part Number: 3388-05407822

Notes: Professional -- New

Position: Front Upper

Part Number: 3388-05407929

Notes: Professional -- New; Bolt-On Type

Position: Front Lower

Part Number: W0133-2204309

Notes: Silver (Advantage)

Product Remark: US

Position: Front Lower

Part Number: W0133-2204290

Notes: Silver (Advantage)

Product Remark: US

Position: Front Upper

Part Number: W0133-2360130

Notes: Premium Problem Solver

Position: Front Lower

Part Number: W0133-2337884

Notes: Premium Problem Solver

Position: Front Upper

Part Number: 3388-05081348

Notes: Suspension Ball Joint

Features:

• Designed for OE fit and function
• Replacement helps restore vehicle handling
• Premium boot keeps out contaminants
• Heavy duty gauge steel construction for strength and durability

Position: Front Lower

Part Number: 3388-05083072

Notes: Suspension Ball Joint

Features:

• Replacement helps restore vehicle handling
• Designed for OE fit and function
• Premium boot keeps out contaminants
• Heavy duty gauge steel construction for strength and durability

Position: Front Upper

Part Number: 3388-05081348

Notes: Suspension Ball Joint -- Bolt-On Type; Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces

Features:

• Designed for OE fit and function
• Replacement helps restore vehicle handling
• Premium boot keeps out contaminants
• Heavy duty gauge steel construction for strength and durability

Position: Front Lower

Part Number: 3388-05083072

Notes: Suspension Ball Joint -- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces

Features:

• Replacement helps restore vehicle handling
• Designed for OE fit and function
• Premium boot keeps out contaminants
• Heavy duty gauge steel construction for strength and durability

Position: Front Upper

Part Number: 3388-05362291

Notes: Suspension Ball Joint -- Original Grade. Bolt-On Type

Position: Front Lower

Part Number: 3388-05362292

Notes: Suspension Ball Joint -- Original Grade. Non-Adjustable Type

Position: Front Upper

Part Number: 3388-05044763

Notes: Suspension Ball Joint -- Supreme - Premium Professional Solution; Enhanced greasable metal bearings for increased durability; Improved boot designs prevents contaminants; Bolt-On Type

Features:

• SINTERED METAL STRENGTH: Increase durability and extend service life with over-built sintered metal technology.
• SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree SAE grease fitting included.
• INSTALLATION READY: Simply secure ball joint to the vehicle with part specific Castle Nut & Cotter Pin provided.

Position: Front Lower

Part Number: 3388-05044764

Notes: Suspension Ball Joint -- Supreme - Premium Professional Solution; Enhanced greasable metal bearings for increased durability; Improved boot designs prevents contaminants; Non-Adjustable Type

Features:

• INSTALLATION READY: Simply secure ball joint to the vehicle with part specific Castle Nut & Cotter Pin provided.
• SINTERED METAL STRENGTH: Increase durability and extend service life with over-built sintered metal technology.
• SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree SAE grease fitting included.

Position: Front Upper

Part Number: 3388-05729188

Notes: Suspension Ball Joint -- TTX - Extreme Durability; Patented technology; Over-sized greasable metal bearings for maximum service life; Superior boot seal protection

Features:

• SUPERIOR TOUGHNESS: Get longer-lasting performance from patented sintered metal bearings.
• LARGER SPHERE DESIGN: Optimize performance with application-specific ball stud system with larger sphere.
• A STRONGER BOND: Keep fasteners secure and vibration resistant with pre-applied Nylok thread adhesive.
• EXCEPTIONAL FIT AND FUNCTION: Prevent deformation during installation with this ball joint designed with a thicker, stronger flange.
• INSTALLATION READY: Simply secure ball joint to the vehicle with part specific Slotted Castle Nut & Easy Snap Cotter Pin provided.
• SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree SAE grease fitting included.

Position: Front Upper

Part Number: 3388-05716601

Notes: Suspension Ball Joint -- TTX - Extreme Durability; Patented technology; Over-sized greasable metal bearings for maximum service life; Superior boot seal protection; Bolt-On Type

Features:

• SUPERIOR TOUGHNESS: Get longer-lasting performance from patented sintered metal bearings.
• SUPERIOR SEAL: Lock out moisture and contaminants with Integri-Boot(TM) design built into the ball joint assembly.
• LARGER SPHERE DESIGN: Optimize performance with application-specific ball stud system with larger sphere.
• A STRONGER BOND: Keep fasteners secure and vibration resistant with pre-applied Nylok thread adhesive.
• INSTALLATION READY: Simply secure ball joint to the vehicle with part specific Slotted Castle Nut & Easy Snap Cotter Pin provided.
• SIMPLE TO SERVICE: Make servicing a snap with the 135 Degree & 180 Degree SAE grease fitting included.

Position: Front Lower

Part Number: 3388-07962235

Notes: Premium RD Rugged Design

Position: Front Upper

Part Number: 3388-07593705

Notes: Premium XL Extended Life

Position: Front Lower

Part Number: 3388-07371229

Notes: Premium XL Extended Life

Position: Front Upper

Part Number: 3388-05666822

Notes: Suspension Ball Joint

Position: Front Lower

Part Number: 3388-07382938

Notes: Suspension Ball Joint

Position: Front Upper

Part Number: 3388-05554345

Notes: C-TEK Standard

Position: Front Lower

Part Number: 3388-05554342

Notes: C-TEK Standard

Position: Front Upper

Part Number: 3388-05554051

Notes: Premium Steering and Suspension

Position: Front Lower

Part Number: 3388-05554048

Notes: Premium Steering and Suspension

Position: Front Upper

Part Number: W0133-1687684

Notes: 3/36 Warranty

Features:

• Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
• Low friction plastic bearings that enhance damping and reliability
• Manufactured using forged or cold formed steel
• Two-seat design is standard, and eliminates the need for a spring
• Top of the ball pins are polished
• Salt Spray Test (240hrs)
• Dynamic Test and Elasticity Test
• Original Equipment quality hardware installation accessories

Position: Front Lower

Part Number: W0133-1686874

Notes: 3/36 Warranty

Features:

• Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
• Low friction plastic bearings that enhance damping and reliability
• Manufactured using forged or cold formed steel
• Two-seat design is standard, and eliminates the need for a spring
• Top of the ball pins are polished
• Salt Spray Test (240hrs)
• Dynamic Test and Elasticity Test
• Original Equipment quality hardware installation accessories

Position: Front Upper

Part Number: 3388-05672124

Notes: Suspension Ball Joint

Features:

• Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
• Delphi ball joints manufactured with high quality forgings for increased strength and smooth operation
• Chloroprene rubber boots to improve durability
• Delphi machines to micron tolerances to guarantee durability and smooth joint operation
• Anti-corrosion protection

Position: Front Upper

Part Number: W0133-1686874

Features:

• OE expertise and quality
• Precision manufactured housing and components
• Corrosion protection
• Permanently attached boot
• One-piece forged housing for easier steering
• Ball joint kits include new pinch bolt, nut and other necessary parts for attachment

Position: Front Upper

Part Number: 3388-05681610

Notes: Suspension Ball Joint -- Bolt In Type

Features:

• Fits and performs like the original equipment
• Precision-engineered to match the design and dimensions of original components
• Made to strict standards using sturdy, safe materials
• Rigorously tested - thorough quality control measures ensure longevity

Position: Front Lower

Part Number: 3388-09250672

Notes: Suspension Ball Joint

Position: Front Lower

Part Number: 3388-09250673

Notes: Suspension Ball Joint

Position: Front Upper

Part Number: 3388-09250672

Notes: Suspension Ball Joint -- Bolt-On Type; Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces

Position: Front Lower

Part Number: 3388-09250673

Notes: Suspension Ball Joint -- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces

Position: Front Upper

Part Number: 3388-05949342

Notes: Suspension Ball Joint -- with Pressed Type, 46.13mm / 1.816 Press Fit Diameter

Position: Front Lower

Part Number: 3388-05949333

Notes: Suspension Ball Joint -- without 15000 LB GVW, Bolt on type

Position: Front Upper

Part Number: W0133-2419806

Position: Front Lower

Part Number: W0133-2419803

Position: Front Upper

Part Number: W0133-3771014

Notes: 3/36 Warranty

Position: Front Upper

Part Number: 3388-07579761

Notes: Front; Upper; Driver & Passenger Side

Position: Front Upper

Part Number: 3388-07418021

Notes: Suspension Ball Joint -- Front; Driver or Passenger Side; Upper

Position: Front Upper

Part Number: 3388-07859593

Notes: Suspension Ball Joint Kit -- Heavy Duty / Super Duty Design, Contains Bracket; 1- Steering Idler Arm, 2- Steering Tie Rod End Adjusting Sleeve, 2-Outer Steering Tie Rod End, 2-Front Lower Suspension Ball Joint, 2-Front Upper Suspension Ball Joint, 2-Inner Steering Tie Rod End

Features:

• Meets or exceeds OEM specifications
• Rigorous quality control measures
• 12-month SKP limited warranty

Part Number: 3388-07720369

Notes: Suspension Ball Joint

Position: Front Upper