1992 BMW 318i Ball Joint

Part Number: 931-08054824

Notes: Ball Joint for Trailing Arm (Trailing Arm to Control Arm)

Position: Rear Left Upper

Part Number: 931-08054824

Notes: Ball Joint for Trailing Arm (Trailing Arm to Control Arm)

Position: Rear Right Upper

Part Number: 931-08069300

Notes: Ball Joint for Control Arm

Position: Front Lower Outer

Part Number: 931-05480645

Notes: Suspension Ball Joint

Features:

• Guaranteed fitment
• OE dimensions and geometry for proper wheel alignment
• Eliminates worn-joint clunking over bumps in roadway
• Restores proper vehicle handling and directional stability
• High-quality materials for maximum performance and durability
• Heat and ozone-resistant dust boots

Position: Front Inner

Part Number: 931-05480646

Notes: Suspension Ball Joint

Features:

• Guaranteed fitment
• OE dimensions and geometry for proper wheel alignment
• Eliminates worn-joint clunking over bumps in roadway
• Restores proper vehicle handling and directional stability
• High-quality materials for maximum performance and durability
• Heat and ozone-resistant dust boots

Position: Front Outer

Part Number: 931-05480674

Notes: Suspension Ball Joint -- Full metal ball joint vs rubber insulated OEM ball joint reduces failure mode

Features:

• Full metal ball joint vs rubber insulated OEM ball joint reduces failure mode
• OE dimensions and geometry for proper wheel alignment
• Eliminates worn-joint clunking over bumps in roadway
• Restores proper vehicle handling and directional stability
• High-quality materials for maximum performance and durability
• Heat and ozone-resistant dust boots

Position: Front Lower Outer

Part Number: 931-08068016

Notes: Ball Joint for Control Arm

Position: Front Left Outer

Part Number: 931-08025957

Notes: Ball Joint for Control Arm

Position: Front Lower Outer

Part Number: 931-08068016

Notes: Ball Joint for Control Arm

Position: Front Right Outer

Part Number: 931-08054899

Notes: Ball Joint for Trailing Arm (Trailing Arm to Control Arm)

Position: Rear Left Upper

Part Number: 931-08054899

Notes: Ball Joint for Trailing Arm (Trailing Arm to Control Arm)

Position: Rear Right Upper

Part Number: W0133-1625576

Notes: OE Replacement

Features:

• OE expertise and quality
• Precision manufactured housing and components
• Corrosion protection
• Permanently attached boot
• One-piece forged housing for easier steering

Position: Front

Part Number: W0133-1626314

Notes: OE Replacement

Features:

• OE expertise and quality
• Precision manufactured housing and components
• Corrosion protection
• Permanently attached boot
• One-piece forged housing for easier steering

Position: Front Inner

Part Number: W0133-1627524

Notes: OE Replacement

Features:

• OE expertise and quality
• Precision manufactured housing and components
• Corrosion protection
• Permanently attached boot
• One-piece forged housing for easier steering

Position: Front Outer

Part Number: 931-05836197

Notes: Suspension Ball Joint

Position: Front Lower Outer

Part Number: W0133-1625576

Product Remark: Heavy Duty

Features:

• Robust steel case with black passivation (special process to reduce corrosion)
• Precision ball pin, lubricated with MEYLE high-tech grease from marine applications and wind energy research
• High quality rubber sleeve with blue clamping ring
• Extra strong self-locking nut
• Self-locking nut with microencapsulation
• Wear-resistant plastic seat (in aviation tried and tested material)

Position: Front

Part Number: 931-08064565

Notes: Ball Joint for Control Arm -- HD

Position: Front Lower Outer

Part Number: 931-08027637

Notes: Ball Joint for Control Arm

Position: Front Left Inner

Part Number: 931-08027636

Notes: Ball Joint for Control Arm

Position: Front Left Outer

Part Number: 931-08027637

Notes: Ball Joint for Control Arm

Position: Front Right Inner

Part Number: 931-08027636

Notes: Ball Joint for Control Arm

Position: Front Right Outer

Part Number: 931-09077537

Notes: Suspension Ball Joint -- Long Stud

Features:

• Patent pending dust boot with encapsulated Belleville washer help control axial and radial movement
• Hardened ball stud made of OE equivalent or better materials to withstand higher loads
• Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
• Premium forged housing with increased cross section of up to 52% more material in key areas
• Larger grease reservoir and easy-to-install pre-tapped grease fitting hole for improved maintenance
• Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
• Castle Nut Included

Position: Front Lower Inner

Part Number: 931-07328910

Notes: Suspension Ball Joint -- Short Stud

Features:

• Castle Nut Included

Position: Front Lower Outer

Part Number: 931-09077536

Notes: Suspension Ball Joint -- Short Stud; Standard Design

Features:

• Hardened ball stud made of OE equivalent or better materials to withstand higher loads
• Patent pending dust boot with encapsulated Belleville washer help control axial and radial movement
• Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
• Premium forged housing with increased cross section of up to 52% more material in key areas
• Larger grease reservoir and easy-to-install pre-tapped grease fitting hole for improved maintenance
• Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
• Castle Nut Included

Position: Front Lower Outer

Part Number: 931-05045939

Notes: Suspension Ball Joint

Position: Front Lower Inner

Part Number: 931-05045938

Notes: Suspension Ball Joint

Position: Front Lower Outer

Part Number: 931-05363332

Notes: Suspension Ball Joint -- Original Grade

Position: Front Lower Inner

Part Number: 931-05363331

Notes: Suspension Ball Joint -- Original Grade

Position: Front Lower Outer

Part Number: W0133-1625576

Notes: 3/36 Warranty

Features:

• Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
• Low friction plastic bearings that enhance damping and reliability
• Manufactured using forged or cold formed steel
• Two-seat design is standard, and eliminates the need for a spring
• Top of the ball pins are polished
• Salt Spray Test (240hrs)
• Dynamic Test and Elasticity Test
• Original Equipment quality hardware installation accessories

Position: Front

Part Number: 931-05113580

Notes: Suspension Ball Joint

Position: Front Lower

Part Number: W0133-1627524

Position: Front Outer

Part Number: 931-08006083

Notes: Ball Joint for Control Arm

Position: Front Lower Outer

Part Number: 931-08054797

Notes: Ball Joint for Trailing Arm (Trailing Arm to Control Arm)

Position: Rear Left Upper

Part Number: 931-08054797

Notes: Ball Joint for Trailing Arm (Trailing Arm to Control Arm)

Position: Rear Right Upper

Part Number: 931-05672840

Notes: Suspension Ball Joint -- Delphi is an OEM supplier

Features:

• Delphi ball joints manufactured with high quality forgings for increased strength and smooth operation
• Ball joints utilize chloroprene rubber boots which improves durability, preventing premature failure
• Delphi machines to micron tolerances to guarantee durability and smooth joint operation
• Anti-corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Position: Front Lower Inner

Part Number: 931-05672336

Notes: Suspension Ball Joint -- Delphi is an OEM supplier; Heavy Duty

Features:

• Delphi ball joints manufactured with high quality forgings for increased strength and smooth operation
• Ball joints utilize chloroprene rubber boots which improves durability, preventing premature failure
• Delphi machines to micron tolerances to guarantee durability and smooth joint operation
• Anti-corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Position: Front Lower Outer

Part Number: 931-05672841

Notes: Suspension Ball Joint -- Delphi is an OEM supplier; Standard Design

Features:

• Delphi ball joints manufactured with high quality forgings for increased strength and smooth operation
• Ball joints utilize chloroprene rubber boots which improves durability, preventing premature failure
• Delphi machines to micron tolerances to guarantee durability and smooth joint operation
• Anti-corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Position: Front Lower Outer

Part Number: 931-05468269

Notes: Advantage -- New; Short Stud

Position: Front Lower Outer

Part Number: 931-05468313

Notes: Advantage -- New; Short Stud

Position: Front Lower Outer

Part Number: 931-08054887

Notes: Ball Joint for Trailing Arm (Trailing Arm to Control Arm)

Position: Rear Left Upper

Part Number: 931-08054887

Notes: Ball Joint for Trailing Arm (Trailing Arm to Control Arm)

Position: Rear Right Upper

Part Number: W0133-1627524

Position: Front Outer

Part Number: 931-07376059

Notes: Chassis

Position: Front Lower Outer

Part Number: 931-07828961

Notes: Chassis

Position: Front Lower Outer

Part Number: 931-07138128

Notes: Suspension Ball Joint

Position: Front Lower Inner

Part Number: 931-05613205

Notes: C-TEK Standard

Position: Front Lower Inner

Part Number: 931-05554138

Notes: C-TEK Standard

Position: Front Lower Outer

Part Number: 931-05641880

Notes: C-TEK Standard

Position: Front Lower Inner

Part Number: 931-05554139

Notes: C-TEK Standard

Position: Front Lower Outer

Part Number: 931-05553625

Notes: Premium Steering and Suspension

Position: Front Lower Inner

Part Number: 931-05553616

Notes: Premium Steering and Suspension

Position: Front Lower Outer

Part Number: 931-05553620

Notes: Premium Steering and Suspension

Position: Front Lower Inner

Part Number: 931-05553617

Notes: Premium Steering and Suspension

Position: Front Lower Outer

Part Number: 931-05682461

Notes: Suspension Ball Joint

Features:

• Direct replacement for a proper fit every time
• Reduce Repair Cost - Replace the failed bushing, instead of the entire assembly
• Constructed of steel and rubber material
• Bushing press tool required for installation

Position: Front Lower Inner

Part Number: 931-07493992

Notes: Suspension Ball Joint

Position: Front Lower Inner

Part Number: 931-07588702

Notes: Suspension Ball Joint

Position: Front Lower Outer

Part Number: W0133-1626314

Position: Front Inner

Part Number: W0133-1627524

Features:

• Greasable design enables lubrication for longer life
• Belleville Washer Preload provides lower torque and stud articulation with minimal axial clearance
• One-piece forged housing provides unequaled durability and strength
• Patented cover plates are compressed into place
• Hardened powdered-metal bearings resist wearing
• Full-ball hardened stud with grease grooves
• Premium neoprene sealed boot with grease-relief valve stands up to temperature extremes, dirt and abrasion

Position: Front Outer

Part Number: W0133-1626314

Features:

• Greasable design enables lubrication for longer life
• Belleville Washer Preload provides lower torque and stud articulation with minimal axial clearance
• One-piece forged housing provides unequaled durability and strength
• Patented cover plates are compressed into place
• Hardened powdered-metal bearings resist wearing
• Full-ball hardened stud with grease grooves
• Premium neoprene sealed boot with grease-relief valve stands up to temperature extremes, dirt and abrasion

Position: Front Inner