1990 Ford E150 Econoline Camshaft

Part Number: 5074-03307432

Notes: High Energy Camshaft / Lifter Kit; Hyd Flat Tappet;1200-5200rpm; 60H Grind;Adv.Dur. 260 Int. / Exh.;V.Lift .447 Int. / Exh.;Lobe 110 deg.;Incl. Cam / Lifters

Detailed Notes: Not Legal For Sale Or Use On Pollution-Controlled Motor Vehicle

Features:

• 1 Year Limited Warranty
• Can Be Used w/Most Stock Components
• For Street Applications w/Lower Compression Ratios
• High Torque Cams

Part Number: 5074-03307433

Notes: High Energy Camshaft / Lifter Kit; Hyd Flat Tappet;1500-5500rpm;Adv.Dur. 268 Int. / Exh.;V.Lift .456 Int. / Exh.;Lobe 110 deg.;Incl. Cam / Lifters;Ford

Detailed Notes: Stock Springs Cannot Be Used~ Not Legal For Sale Or Use On Pollution-Controlled Motor Vehicle

Features:

• 1 Year Limited Warranty
• Can Be Used w/Most Stock Components
• For Street Applications w/Lower Compression Ratios
• High Torque Cams

Part Number: 5074-03307486

Notes: High Energy Camshaft / Lifter Kit; Hyd.Flat Tappet;1500-5500rpm;Adv.Dur. 268 Int. / Exh.;V.Lift .456 Int. / Exh.;Lobe 110 deg.;Incl. Cam / Lifters

Detailed Notes: Stock Springs Cannot Be Used~ Not Legal For Sale Or Use On Pollution-Controlled Motor Vehicle

Features:

• 1 Year Limited Warranty
• Can Be Used w/Most Stock Components
• For Street Applications w/Lower Compression Ratios
• High Torque Cams

Part Number: 5074-03644704

Notes: Performer RPM Camshaft Kit; Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int / Exh 224 / 234 Deg.; Lift at Valve Int / Exh 0.496 / 0.520 in.; Lobe Seps 110 Deg.; Intake Center Line 106 Deg.;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

Detailed Notes: Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 400hp and 412ft.-lbs When Matched w / 7181 Intake and 60259 Heads

Features:

• 10 To 12 in. Of Manifold Vacuum At Idle
• Designed for 1500 to 6500 RPM Performance
• Dyno-Matched/Street-Proven Performance
• Includes Hydraulic Lifters and Assembly Lube
• Matched to Edelbrock Performer RPM Intakes
• Maximum Power in High-RPM with Good Low-End Torque
• More Lift And Duration Than Most Street Camshafts
• Take the Guesswork Out of Camshaft Selection!

Part Number: 5074-03644700

Notes: Performer RPM Camshaft Kit; Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int / Exh 224 / 234 Deg.; Lift at Valve Int / Exh 0.496 / 0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

Detailed Notes: Not For 1985 And Later Engines w / Roller Lifters~ Idle Vacuum at 1000 RPM - 11 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 367hp and 304ft.-lbs. When Matched w / 7121 Manifold and 60259 Heads~ Screw-In Studs / Guide Plates / Adj. Rocker Arms Required

Features:

• 10 To 12 in. Of Manifold Vacuum At Idle
• Designed for 1500 to 6500 RPM Performance
• Dyno-Matched/Street-Proven Performance
• Includes Hydraulic Lifters and Assembly Lube
• Matched to Edelbrock Performer RPM Intakes
• Maximum Power in High-RPM with Good Low-End Torque
• More Lift And Duration Than Most Street Camshafts
• Take the Guesswork Out of Camshaft Selection!

Part Number: 5074-03133855

Notes: Performer-Plus Camshaft Kit; Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int / Exh 204 / 214 Deg.; Lift at Valve Int / Exh 0.448 / 0.472 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

Detailed Notes: Idle Vacuum at 1000 RPM - 16 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Produces 310hp and 260 ft.-lbs. When Matched w / 2121 Intake / 60329 Heads

Features:

• Designed for Optimum Torque and Acceleration
• Includes Hydraulic Lifters and Assembly Lube
• Major Improvement in Throttle Response and Torque
• Matched to Edelbrock Performer Intakes
• Maximum Performance From Idle through Mid-Range
• Take the Guesswork Out of Camshaft Selection!
• Use For Daily Drivers/Trucks/Vans/RVs/4x4s

Part Number: 5074-03133942

Notes: Performer-Plus Camshaft Kit; Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int / Exh. 204 / 214 Deg.; Lift at Valve Int / Exh. 0.448 / 0.472 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

Detailed Notes: Idle Vacuum at 1000 RPM - 15 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 325 ft.-lbs. When Matched w / 2181 Intake and Stock Heads

Features:

• Designed for Optimum Torque and Acceleration
• Includes Hydraulic Lifters and Assembly Lube
• Major Improvement in Throttle Response and Torque
• Matched to Edelbrock Performer Intakes
• Maximum Performance From Idle through Mid-Range
• Take the Guesswork Out of Camshaft Selection!
• Use For Daily Drivers/Trucks/Vans/RVs/4x4s

Part Number: 5074-03644694

Notes: Rollin Thunder Camshaft; Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int / Exh 220 Deg.; Lift at Valve Int / Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.;CARB E.O. D-215-14

Detailed Notes: May Use Original Hydraulic Roller Lifters~ Idle Vacuum - 13 inch~ 50 State Legal~ Match w / Performer Intake 3821 and Performer Heads 60379~ This Combo Produces 300hp and 325 ft.-lbs. of Torque

Features:

• Designed for Optimum Torque and Acceleration
• Includes Hydraulic Lifters and Assembly Lube
• Major Improvement in Throttle Response and Torque
• Matched to Edelbrock Performer Intakes
• Take the Guesswork Out of Camshaft Selection!
• Use For Daily Drivers/Trucks/Vans/RVs/4x4s
• Without Excessive Valve Overlap

Part Number: 5074-03644693

Notes: Rollin Thunder Camshaft; Hyd Roller; 1500-6500rpm; Adv Dur at 0.050 Int / Exh 227 / 234 Deg.; Lift at Valve Int / Exh 0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles

Detailed Notes: Idle Vacuum at 1000 RPM - 12 inch~ Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Match w / Performer PRM Heads PN[60255]~ This Combo Produces 384hp and 347 ft.-lbs Of Torque

Features:

• 10 To 12 in. Of Manifold Vacuum At Idle
• Designed for 1500 to 6500 RPM Performance
• Dyno-Matched/Street-Proven Performance
• Matched to Edelbrock Performer RPM Intakes
• Maximum Power in High-RPM with Good Low-End Torque
• More Lift And Duration Than Most Street Camshafts
• Take the Guesswork Out of Camshaft Selection!
• Use Only Stock Ratio Rocker Arms

Part Number: 5074-03643504

Notes: Rollin Thunder Camshaft; Hyd Roller; 1500-6500rpm; Adv Dur at 0.050 Int / Exh 235 / 238 Deg.; Lift at Valve Int / Exh 0.573 / 0.583 in.; Lobe Spes 112 Deg. Intake Center Line 107 Deg.;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

Detailed Notes: Idle Vacuum at 1000 RPM - 10 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Match w / RPM Air-Gap Dual Quad 75354 and Performer RPM Heads 60255~ The Combo Produces 449hp and 413 ft.-lbs. of Torque

Features:

• 10 To 12 in. Of Manifold Vacuum At Idle
• Designed for 1500 to 6500 RPM Performance
• Dyno-Matched/Street-Proven Performance
• Extensive Dyno And Real World Tested
• Matched to Edelbrock Performer RPM Intakes
• More Lift And Duration Than Most Street Camshafts
• Take the Guesswork Out of Camshaft Selection!
• Use Only Stock Ratio Rocker Arms

Part Number: 5074-05669197

Notes: Engine Camshaft -- Hydraulic; (050) Duration at .050 Lobe Lift; 192 exhaust; 183 intake; 108 Degrees Lobe Separation

Part Number: 5074-05645734

Notes: Engine Camshaft -- Hydraulic; (050) Duration at .050 Lobe Lift; 221 exhaust; 206 intake; 115 Degrees Lobe Separation; Windsor

Part Number: 5074-05433737

Notes: Engine Camshaft -- With engine I.D. Codes AK-250-AA, AK-252-AA, AK-263-AA, AK-265-AA; Hydraulic; (050) Duration at .050 Lobe Lift; 192 exhaust; 192 intake; 50 Degrees Lobe Separation

Part Number: 5074-03270663

Notes: Hydraulic Roller Camshaft; Performance Camshaft Work Only w / Mass Air Induction On EFI Systems; .480 in. Valve Lift; [Available While Supplies Last];Racing Use Only

Detailed Notes: Not Legal For Sale Or Use On Pollution Controlled Vehicles

Features:

• On EFI Perf Camshafts Work Only w/Mass Air Induction Syst.
• Requires Upgraded Valve Springs
• Valve Spring Requires 120 lbs V. Seat Press. Min. 295 lbs Open

Part Number: 5074-03270625

Notes: Hydraulic Roller Camshaft; Performance Camshaft Work Only w / Mass Air Induction On EFI Systems; .498 in. Valve Lift;Racing Use Only

Detailed Notes: Not Legal For Sale Or Use On Pollution Controlled Vehicles

Features:

• Hydraulic Roller Camshaft

Part Number: 5074-03270645

Notes: Hydraulic Roller Camshaft; Performance Camshaft Work Only w / Mass Air Induction On EFI Systems; .512 in. Valve Lift;Racing Use Only

Detailed Notes: Not Legal For Sale Or Use On Pollution Controlled Vehicles

Features:

• Hydraulic Roller Camshaft

Part Number: 5074-07980610

Notes: Performance -- Class 1, Good Idle With Low RPM Torque And Mid Range Performance; For Use With Retro-Fit Roller Lifter F1900RF16; Advertised Intake Duration 298; Advertised Exhaust Duration 282; Hydraulic Camshaft

Features:

• High Performance Camshaft
• Class I camshaft (200°-215°). Good idle quality. Low rpm torque and mid range performance. Will work with stock or slightly modified engine. Manual or auto transmission. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Part Number: 5074-07327264

Notes: Performance -- Class 1, Good Idle With Low RPM Torque And Mid Range Performance; Use 302 Firing Order 1-5-4-2-6-3-7-8; Advertised Intake Duration 258; Advertised Exhaust Duration 271; Hydraulic Camshaft

Features:

• High Performance Camshaft
• Class I camshaft (200°-215°). Good idle quality. Low rpm torque and mid range performance. Will work with stock or slightly modified engine. Manual or auto transmission. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Part Number: 5074-07431505

Notes: Performance -- Class 2, Fair Idle With Good Low To Mid Range Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 300; Advertised Exhaust Duration 306; Hydraulic Camshaft

Features:

• High Performance Camshaft
• Class II camshaft (215°-230°). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Part Number: 5074-07594173

Notes: Performance -- Class 2, Fair Idle With Good Low To Mid Range Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 308; Advertised Exhaust Duration 308; Hydraulic Camshaft

Features:

• High Performance Camshaft
• Class II camshaft (215°-230°). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Part Number: 5074-07598815

Notes: Performance -- Class 2, Fair Idle With Good Low To Mid Range Torque And Horsepower; Lower Engine Vacuum Than Stock; For Use With Retro-Fit Roller Lifter F1900RF16; Advertised Intake Duration 285; Advertised Exhaust Duration 285; Hydraulic Camshaft

Features:

• High Performance Camshaft
• Class II camshaft (215°-230°). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Part Number: 5074-07385752

Notes: Stock -- Class 1, Excellent Low End Torque And Horsepower; Good Idle And Daily Usage; Not California Compliant; Not Computer Compatible

Features:

• Class I camshaft (200°-215°). Good idle quality. Low rpm torque and mid range performance. Will work with stock or slightly modified engine. Manual or auto transmission. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Part Number: 5074-07896528

Notes: Stock -- OE Stock Replacement Grind

Features:

• Melling offers a full line of OE replacement camshafts for cars, light duty, medium duty and heavy duty trucks. Melling listings include OEM applications to match the engine requirements desired including horsepower, economy and needed engine torque. Melling stock replacement camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Part Number: 5074-07614297

Notes: Stock -- OE Stock Replacement Grind

Features:

• Melling offers a full line of OE replacement camshafts for cars, light duty, medium duty and heavy duty trucks. Melling listings include OEM applications to match the engine requirements desired including horsepower, economy and needed engine torque. Melling stock replacement camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.

Part Number: 5074-07872199

Notes: Stock -- OE Stock Replacement Grind

Features:

• Melling offers a full line of OE replacement camshafts for cars, light duty, medium duty and heavy duty trucks. Melling listings include OEM applications to match the engine requirements desired including horsepower, economy and needed engine torque. Melling stock replacement camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.