1990 BMW 735i Strut Insert

Part Number: W0133-1614641

Notes: Excel-G - Production: -06/30/1990, Boge - w/o Sport Suspension or EDC

Features:

• Direct fit application for ease of installation
• Calibrated to compensate for worn suspensions
• Components and valving are designed specifically for each application
• The best choice to restore OE performance and normal driving conditions
• Built with quality that matches or exceeds OE
• Coverage for domestic and import cars, trucks, vans, minivans, and SUVs

Position: Front

Part Number: W0133-1613663

Notes: Excel-G - Production: 07/1990-, w/o Sport Suspension or EDC

Features:

• Direct fit application for ease of installation
• Calibrated to compensate for worn suspensions
• Components and valving are designed specifically for each application
• The best choice to restore OE performance and normal driving conditions
• Built with quality that matches or exceeds OE
• Coverage for domestic and import cars, trucks, vans, minivans, and SUVs

Position: Front

Part Number: 1104-05118076

Notes: Excel-G -- Recommended OEM Replacement; (E32) (Except Self Leveling Suspension); From 8/1990

Features:

• Designed to restore handling and control
• Made from quality material
• Features twin-tube design
• Compensates worn suspensions
• Facilitates easy installation

Position: Front

Part Number: 1104-05118075

Notes: Excel-G -- Recommended OEM Replacement; (E32) (Except Self Leveling Suspension); To 7/1990

Features:

• Designed to restore handling and control
• Made from quality material
• Features twin-tube design
• Compensates worn suspensions
• Facilitates easy installation

Position: Front

Part Number: W0133-1910651

Notes: B4 OE Replacement - Production: -06/1990, 2.5" dust cap on top of upper support bearing with 19mm nut. Recommended for use if shorter springs are installed.

Features:

• Constant damping characteristics under any load
• Consistent performance and handling give the vehicle a new car feel every time
• Proven BILSTEIN gas pressure technology
• High OEM quality standards

Position: Front

Part Number: W0133-1911392

Notes: B6 Performance Monotube - Production: -06/1990

Product Remark: NLA 9.20

Features:

• Monotube gas pressure construction
• Improved safety and sportiness
• Added traction and enhanced stability
• Increased durability and performance while maintaining ride comfort
• Road-tested and fine-tuned by BILSTEIN for each vehicle specific application The performance of the Bilstein shocks does not decline from age, use or heat, requiring no compensating manual adjustments as with conventional multi-tube shocks.

Position: Front

Part Number: W0133-1911392

Notes: B6 Performance Monotube - Production: -06/30/1990, Boge - w/o Sport Suspension or EDC

Product Remark: NLA 9.20

Features:

• Monotube gas pressure construction
• Improved safety and sportiness
• Added traction and enhanced stability
• Increased durability and performance while maintaining ride comfort
• Road-tested and fine-tuned by BILSTEIN for each vehicle specific application The performance of the Bilstein shocks does not decline from age, use or heat, requiring no compensating manual adjustments as with conventional multi-tube shocks.

Position: Front

Part Number: 1104-05817000

Notes: B8 Performance Plus Suspension Strut Cartridge -- Use With 2.5 in. DustCap; 19mm Nut; Stem 70mm X 14mm; Dropped Ht Depends On Lowering Spring Used; With 0 in. Lift/Drop; From 3/1988 To 6/1990

Features:

• Bilstein B8 Performance Plus Strut
• Deliver Absolute Mastery Of The Road Surface
• Added Traction And Enhanced Stability
• Increased Durability And Performance
• Vehicle Specific Ride Tuning

Position: Front

Part Number: W0133-1919205

Notes: TwinTube - Production: 07/1990-, w/o Sport Suspension or EDC

Features:

• OE-equivalent
• Direct fit application for ease of installation
• Twin tube design
• Restores the original driving performance

Position: Front

Part Number: W0133-1974345

Notes: B4 OE Replacement - Production: 07/1990-, w/o Sport Suspension or EDC

Features:

• Constant damping characteristics under any load
• Consistent performance and handling give the vehicle a new car feel every time
• Proven BILSTEIN gas pressure technology
• High OEM quality standards

Position: Front

Part Number: W0133-1974684

Notes: B4 OE Replacement - Production: -06/30/1990, Boge - w/o Sport Suspension or EDC

Features:

• Constant damping characteristics under any load
• Consistent performance and handling give the vehicle a new car feel every time
• Proven BILSTEIN gas pressure technology
• High OEM quality standards

Position: Front

Part Number: 1104-07557999

Notes: Suspension Strut Cartridge -- From 7/90, Without M-Technik Suspension

Position: Front

Part Number: 1104-05893196

Notes: B4 Series OE Replacement Suspension Strut Cartridge -- With 0 in. Lift/Drop; To 7/1990~ Without Electronic Suspension

Features:

• Bilstein B4
• Economical Choice
• Maintains Original Equipment Ride Performance
• World-Famous Durability
• Precise Construction

Position: Front

Part Number: 1104-05665607

Notes: B6 Performance Suspension Strut Cartridge -- With 0 in. Lift/Drop; From 7/1990~ Without Electronic Suspension

Features:

• B6 Performance Shock Absorber
• Monotube Gas Pressure Construction
• Improved Ride And Handling
• Added Traction And Enhanced Stability
• Increased Durability And Performance
• Vehicle Specific Ride Tuning

Position: Front

Part Number: 1104-05904375

Notes: Suspension Strut Cartridge -- All With Standard Suspension (With Self Leveling Suspension); Insert

Features:

• SACHS Shocks and Struts are intelligently engineered to restore original handling dynamics while designed to meet the highest safety, comfort, performance, and quality standards.
• DURABILITY > Micro-Polished Chrome Piston Rods: SACHS micro-polished chromed piston rods have been hardened for maximum strength to provide the longest service life. Our chrome finish helps fight rust while the low-friction surface effectively prevents seal leakage.
• COMFORT & PERFORMANCE > Banded Piston: Our engineered polymer piston band immediately responds to suspension movements even at slow speeds. The piston band effectively seals the working cylinder allowing the valves to operate at 100% efficiency. Valves with a banded piston can be finely tuned for specific vehicles to consistently provide the intended comfort and performance.
• OEM TECHNOLOGY > Low Friction Seal: SACHS advanced seal technology uses a special NBR rubber which is highly wear resistant and can withstand temperatures to 260 degrees F, keeping oil in and contaminants out. Engineered with low friction movement in mind, our design helps maintain the original tuning characteristics.
• PRECISE TUNING > Sintered Metal Valves: Our high quality valve design enables precise oil flow by using sintered metal valve construction. Tight tolerances and strength from sintered metal allow for precise tuning of compression and rebound rates that restore the original handling dynamics.
• ENDURANCE > Polished Working Cylinder: SACHS working cylinders are drawn to precise dimensions and polished ultra-smooth to prevent piston band wear. Our technology permits close tuning tolerances while reducing friction and heat for the utmost endurance.
• Twin-tube Design - Insert

Position: Front

Part Number: 1104-05904375

Notes: Suspension Strut Cartridge -- With Sport Suspension; Insert

Features:

• SACHS Shocks and Struts are intelligently engineered to restore original handling dynamics while designed to meet the highest safety, comfort, performance, and quality standards.
• DURABILITY > Micro-Polished Chrome Piston Rods: SACHS micro-polished chromed piston rods have been hardened for maximum strength to provide the longest service life. Our chrome finish helps fight rust while the low-friction surface effectively prevents seal leakage.
• COMFORT & PERFORMANCE > Banded Piston: Our engineered polymer piston band immediately responds to suspension movements even at slow speeds. The piston band effectively seals the working cylinder allowing the valves to operate at 100% efficiency. Valves with a banded piston can be finely tuned for specific vehicles to consistently provide the intended comfort and performance.
• OEM TECHNOLOGY > Low Friction Seal: SACHS advanced seal technology uses a special NBR rubber which is highly wear resistant and can withstand temperatures to 260 degrees F, keeping oil in and contaminants out. Engineered with low friction movement in mind, our design helps maintain the original tuning characteristics.
• PRECISE TUNING > Sintered Metal Valves: Our high quality valve design enables precise oil flow by using sintered metal valve construction. Tight tolerances and strength from sintered metal allow for precise tuning of compression and rebound rates that restore the original handling dynamics.
• ENDURANCE > Polished Working Cylinder: SACHS working cylinders are drawn to precise dimensions and polished ultra-smooth to prevent piston band wear. Our technology permits close tuning tolerances while reducing friction and heat for the utmost endurance.
• Twin-tube Design - Insert

Position: Front

Part Number: 1104-05904375

Notes: Suspension Strut Cartridge -- With Standard Suspension (Except Self Leveling Suspension); From 3/88; Insert

Features:

• SACHS Shocks and Struts are intelligently engineered to restore original handling dynamics while designed to meet the highest safety, comfort, performance, and quality standards.
• DURABILITY > Micro-Polished Chrome Piston Rods: SACHS micro-polished chromed piston rods have been hardened for maximum strength to provide the longest service life. Our chrome finish helps fight rust while the low-friction surface effectively prevents seal leakage.
• COMFORT & PERFORMANCE > Banded Piston: Our engineered polymer piston band immediately responds to suspension movements even at slow speeds. The piston band effectively seals the working cylinder allowing the valves to operate at 100% efficiency. Valves with a banded piston can be finely tuned for specific vehicles to consistently provide the intended comfort and performance.
• OEM TECHNOLOGY > Low Friction Seal: SACHS advanced seal technology uses a special NBR rubber which is highly wear resistant and can withstand temperatures to 260 degrees F, keeping oil in and contaminants out. Engineered with low friction movement in mind, our design helps maintain the original tuning characteristics.
• PRECISE TUNING > Sintered Metal Valves: Our high quality valve design enables precise oil flow by using sintered metal valve construction. Tight tolerances and strength from sintered metal allow for precise tuning of compression and rebound rates that restore the original handling dynamics.
• ENDURANCE > Polished Working Cylinder: SACHS working cylinders are drawn to precise dimensions and polished ultra-smooth to prevent piston band wear. Our technology permits close tuning tolerances while reducing friction and heat for the utmost endurance.
• Twin-tube Design - Insert

Position: Front

Part Number: 1104-05805903

Notes: Suspension Strut Cartridge -- With Standard Suspension (Except Self Leveling Suspension); To 7/90; Insert

Features:

• SACHS Shocks and Struts are intelligently engineered to restore original handling dynamics while designed to meet the highest safety, comfort, performance, and quality standards.
• DURABILITY > Micro-Polished Chrome Piston Rods: SACHS micro-polished chromed piston rods have been hardened for maximum strength to provide the longest service life. Our chrome finish helps fight rust while the low-friction surface effectively prevents seal leakage.
• COMFORT & PERFORMANCE > Banded Piston: Our engineered polymer piston band immediately responds to suspension movements even at slow speeds. The piston band effectively seals the working cylinder allowing the valves to operate at 100% efficiency. Valves with a banded piston can be finely tuned for specific vehicles to consistently provide the intended comfort and performance.
• OEM TECHNOLOGY > Low Friction Seal: SACHS advanced seal technology uses a special NBR rubber which is highly wear resistant and can withstand temperatures to 260 degrees F, keeping oil in and contaminants out. Engineered with low friction movement in mind, our design helps maintain the original tuning characteristics.
• PRECISE TUNING > Sintered Metal Valves: Our high quality valve design enables precise oil flow by using sintered metal valve construction. Tight tolerances and strength from sintered metal allow for precise tuning of compression and rebound rates that restore the original handling dynamics.
• ENDURANCE > Polished Working Cylinder: SACHS working cylinders are drawn to precise dimensions and polished ultra-smooth to prevent piston band wear. Our technology permits close tuning tolerances while reducing friction and heat for the utmost endurance.
• Twin-tube Design - Insert

Position: Front

Part Number: 1104-05805903

Notes: Suspension Strut Cartridge -- With Standard Suspension (With Self Leveling Suspension); Insert

Features:

• SACHS Shocks and Struts are intelligently engineered to restore original handling dynamics while designed to meet the highest safety, comfort, performance, and quality standards.
• DURABILITY > Micro-Polished Chrome Piston Rods: SACHS micro-polished chromed piston rods have been hardened for maximum strength to provide the longest service life. Our chrome finish helps fight rust while the low-friction surface effectively prevents seal leakage.
• COMFORT & PERFORMANCE > Banded Piston: Our engineered polymer piston band immediately responds to suspension movements even at slow speeds. The piston band effectively seals the working cylinder allowing the valves to operate at 100% efficiency. Valves with a banded piston can be finely tuned for specific vehicles to consistently provide the intended comfort and performance.
• OEM TECHNOLOGY > Low Friction Seal: SACHS advanced seal technology uses a special NBR rubber which is highly wear resistant and can withstand temperatures to 260 degrees F, keeping oil in and contaminants out. Engineered with low friction movement in mind, our design helps maintain the original tuning characteristics.
• PRECISE TUNING > Sintered Metal Valves: Our high quality valve design enables precise oil flow by using sintered metal valve construction. Tight tolerances and strength from sintered metal allow for precise tuning of compression and rebound rates that restore the original handling dynamics.
• ENDURANCE > Polished Working Cylinder: SACHS working cylinders are drawn to precise dimensions and polished ultra-smooth to prevent piston band wear. Our technology permits close tuning tolerances while reducing friction and heat for the utmost endurance.
• Twin-tube Design - Insert

Position: Front

Part Number: 1104-08033053

Notes: Strut Insert -- Not for cars with Electronic Damper Control (EDC).; from 07/90

Position: Front Right

Part Number: 1104-08033053

Notes: Strut Insert -- Not for cars with Electronic Damper Control (EDC).; from 07/90

Position: Front Left