1989 Mercedes 420SEL Stabilizer Bar Link Repair KitReview Fitment Notes to Ensure Proper Fit
‹ Change Part / Category
‹ Change Vehicle
Stabilizer Bar Link Repair Kit
Baum Tools Stabilizer Bar Link Repair Kit - Front
Part Number: 6265-08001560
Notes: Sway Bar Link Repair Kit (Repair Solution) -- Saves approximately 20 hours labor time versus replacing the entire sway bar.; Instructions as follows: (1) Loosen the upper control arm mount on sway bar. (2) Remove the bolt, washer and rubber mount from sway bar end. (3) Cut the sway bar end off to approximately 1/2" back from the thin section. (4) Clean end and weld the Sway Bar Saver in place. (5) Install upper control arm outer bushings and tighten.; The sway bar end links are not available from the vehicle manufacturer. This repair kit includes: new bushings, washers, bolt and special stainless steel repair piece. For Mercedes 123, and 126 chassis cars.