1989 GMC K1500 Power Steering Pump

Part Number: 4020-07995942

Notes: Power Steering Pump -- 8th Vin Digit K; V8 5.7L

Part Number: 4020-07995942

Notes: Power Steering Pump -- Diesel; 8th Vin Digit C; V8 6.2L

Part Number: 4020-07995942

Notes: Power Steering Pump -- V6 4.3L; 8th Vin Digit Z

Part Number: 4020-07995942

Notes: Power Steering Pump -- V8 5.0L; 8th Vin Digit H

Part Number: 4020-05435239

Notes: Power Steering Pump -- In-Line filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Reservoir Included

Features:

• 100% computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
• Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
• Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
• Units are supplied with reservoir and cap (when applicable) to reduce installation time and prevent contamination from trapped debris.

Part Number: 4020-09002275

Notes: Power Steering Pump -- In-Line filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Reservoir Not Included

Features:

• All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
• All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
• Units are supplied with 100% tested and calibrated pressure relief valves.

Part Number: 4020-05790683

Notes: Power Steering Pump -- In-Line filter available; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Reservoir Not Included

Features:

• 100% computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
• Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
• Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
• Units are supplied with reservoir and cap (when applicable) to reduce installation time and prevent contamination from trapped debris.

Part Number: 4020-05102378

Notes: Power Steering Pump -- In-Line filter available; without Aftermarket Filtration Improvement; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Reservoir Included

Features:

• All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
• All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
• Units are supplied with 100% tested and calibrated pressure relief valves.

Part Number: W0133-2227990

Notes: Remanufactured

Product Remark: w/o Reservoir

Part Number: 4020-05951283

Notes: New Power Steering Pump -- With Reservoir; ** Reservoir Units Are Recommended Replacement **

Features:

• Premium-quality new power steering pump designed for dependability and reliability throughout the service life of the vehicle.

Part Number: 4020-05860006

Notes: New Power Steering Pump -- Without Reservoir

Features:

• Premium-quality remanufactured power steering pump designed for dependability and reliability throughout the service life of the vehicle.

Part Number: 4020-05939668

Notes: New Power Steering Pump -- Without Reservoir

Features:

• Premium-quality remanufactured power steering pump designed for dependability and reliability throughout the service life of the vehicle.

Part Number: 4020-05720919

Notes: Remanufactured Power Steering Pump -- With Reservoir; ** Reservoir Units Are Recommended Replacement **

Features:

• Premium-quality new power steering pump designed for dependability and reliability throughout the service life of the vehicle.

Part Number: 4020-09227154

Notes: Remanufactured Power Steering Pump -- Without Reservoir

Features:

• Premium-quality remanufactured power steering pump designed for dependability and reliability throughout the service life of the vehicle.

Part Number: 4020-09256518

Notes: Remanufactured Power Steering Pump -- Without Reservoir

Features:

• Premium-quality remanufactured power steering pump designed for dependability and reliability throughout the service life of the vehicle.

Part Number: 4020-07683063

Notes: Professional -- Remanufactured; With Reservoir; ** Reservoir Units Are Recommended Replacement **

Part Number: W0133-2051288

Notes: Gold (Professional) Reman

Part Number: W0133-1903547

Notes: Remanufactured

Features:

• OEM-Quality and Direct Fit replacement
• Components are inspected and cleaned of rust and corrosion.
• Shaft and internal surfaces are inspected, reconditioned and polished.
• Seals and O-rings are replaced with new, OE-equivalent parts.
• Assembled units are 100% functionally tested for leaks and performance.

Part Number: 4020-07903405

Notes: Power Steering Pump -- In-Line filter available; without Aftermarket Filtration Improvement; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Reservoir Included

Features:

• All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
• All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
• Units are supplied with 100% tested and calibrated pressure relief valves.

Part Number: 4020-07002410

Notes: Power Steering Pump -- In-Line filter available; without Aftermarket Filtration Improvement; For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system; Reservoir Included

Features:

• All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
• All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
• Units are supplied with 100% tested and calibrated pressure relief valves.

Part Number: 4020-05269229

Notes: Remanufactured Power Steering Pump -- with Aftermarket Magna Pure Filteration; Supplied With Reservoir; For warranty purposes it is recommended to use suggested OE Fluid and flush the system

Part Number: 4020-05407328

Notes: Professional -- Remanufactured; Without Reservoir

Features:

• Assembled units are 100% functionally tested for leak-free performance, prior to packaging, to help guarantee unit performance that meets vehicle specifications
• High-temperature seals are utilized for durability and reliability
• Cam packs closely are inspected for any wear or imperfections and replaced with new when needed
• Input shaft seal surfaces are micro-finished for precise fit and leak-free performance
• All components are closely inspected and validated to meet the strictest quality standards to improve part durability
• Multiple cleaning and washing stations, with regular contamination audits, for every component inside the pump minimize internal contamination and increase part service life
• Housing is cleaned and inspected at multiple stages in the manufacturing process to minimize corrosion and rust prior to component assembly
• Seals and O-rings are replaced with new parts for extended life and reliability
• Sealing surfaces are polished, restored, and checked for microfinish. This helps ensure maximum sealing to minimize leaks.
• Show More
• Show Less

Part Number: 4020-05407327

Notes: Professional -- Remanufactured; Without Reservoir

Features:

• Assembled units are 100% functionally tested for leak-free performance, prior to packaging, to help guarantee unit performance that meets vehicle specifications
• High-temperature seals are utilized for durability and reliability
• Cam packs closely are inspected for any wear or imperfections and replaced with new when needed
• Input shaft seal surfaces are micro-finished for precise fit and leak-free performance
• All components are closely inspected and validated to meet the strictest quality standards to improve part durability
• Multiple cleaning and washing stations, with regular contamination audits, for every component inside the pump minimize internal contamination and increase part service life
• Housing is cleaned and inspected at multiple stages in the manufacturing process to minimize corrosion and rust prior to component assembly
• Seals and O-rings are replaced with new parts for extended life and reliability
• Sealing surfaces are polished, restored, and checked for microfinish. This helps ensure maximum sealing to minimize leaks.
• Show More
• Show Less