1988 Plymouth Caravelle Fuel Pump

Part Number: 2358-05239938

Notes: Fuel Pump and Strainer Set -- OE Replacement Fuel Pump & Strainer Kit

Part Number: 2358-05239936

Notes: Fuel Pump and Strainer Set -- OE Replacement Fuel Pump & Strainer Kit

Part Number: 2358-05317008

Notes: Electric Fuel Pump -- Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.

Features:

• Always replace the fuel strainer when doing a fuel pump repair
• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Delphi is a global OE manufacturer and all fuel pumps are built to Delphi's OE standards
• Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
• Improved pump performance as a result of Delphi's innovative design and durability
• Lower amperage draws less load on vehicle's electrical system
• Part is validated, tested and matched to the right vehicle application
• Restores fast pressure performance and system integrity, translating to better pumping through less energy
• Show More
• Show Less

Position: In-Tank

Part Number: 2358-05317006

Notes: Electric Fuel Pump -- Single Nipple; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.

Features:

• Always replace the fuel strainer when doing a fuel pump repair
• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Delphi is a global OE manufacturer and all fuel pumps are built to Delphi's OE standards
• Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
• Improved pump performance as a result of Delphi's innovative design and durability
• Lower amperage draws less load on vehicle's electrical system
• Part is validated, tested and matched to the right vehicle application
• Restores fast pressure performance and system integrity, translating to better pumping through less energy
• Show More
• Show Less

Position: In-Tank

Part Number: 2358-05541707

Notes: Fuel Pump and Sender Assembly -- Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.

Features:

• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Delphi is a global OE manufacturer and all fuel pumps are built to Delphi's OE standards
• Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
• Lower failure rates due to its innovative design and durability
• Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
• Lower amperage draws less load on vehicle's electrical system
• Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
• Restores fast pressure performance and system integrity, translating to better pumping through less energy
• Part is validated, tested and matched to the right vehicle application
• Show More
• Show Less

Part Number: 2358-05541708

Notes: Fuel Pump and Sender Assembly -- Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.; without Return Line

Features:

• Always be sure to check and clean fuel tank to avoid unnecessary returns
• Delphi is a global OE manufacturer and all fuel pumps are built to Delphi's OE standards
• Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
• Lower failure rates due to its innovative design and durability
• Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
• Lower amperage draws less load on vehicle's electrical system
• Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
• Restores fast pressure performance and system integrity, translating to better pumping through less energy
• Part is validated, tested and matched to the right vehicle application
• Show More
• Show Less

Part Number: 2358-05771708

Notes: Electric Fuel Pump -- Includes Two Tank Seal, Hose, Rubber Sleeve and Clamps

Position: In-Tank

Part Number: 2358-07901367

Notes: Electric Fuel Pump -- Includes Two Tank Seals, Hoses, Rubber Sleeve, Terminals and Clamps

Position: In-Tank

Part Number: 2358-05276785

Notes: Fuel Pump Hanger Assembly

Part Number: 2358-07259676

Notes: Fuel Pump Hanger Assembly -- 1 Tube Port

Part Number: 2358-05488546

Notes: Electric Fuel Pump -- Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty; In-Tank Pump

Part Number: 2358-09087405

Notes: Fuel Pump Hanger Assembly

Part Number: 2358-05488966

Notes: Fuel Pump Hanger Assembly -- Internal Strainer Included

Part Number: 2358-05009133

Notes: Electric Fuel Pump -- Includes Two Tank Seal, Hose, Rubber Sleeve and Clamps

Features:

• Gasket Included
• Meet or exceed OE specifications.

Position: In-Tank

Part Number: 2358-05009136

Notes: Electric Fuel Pump -- Includes Two Tank Seals, Hoses, Rubber Sleeve, Terminals and Clamps

Features:

• Gasket Included
• Meet or exceed OE specifications.

Position: In-Tank

Part Number: 2358-09008931

Notes: Fuel Pump Hanger Assembly

Features:

• Gasket Included
• Meet or exceed OE specifications.

Part Number: 2358-09008932

Notes: Fuel Pump Hanger Assembly -- 1 Tube Port

Features:

• Gasket Included
• Meet or exceed OE specifications.

Part Number: 2358-03133087

Notes: Performer Series Street Fuel Pump -- 6 Valves; Flow Cap 110 GPH; 6 PSI; 3 / 8 in. NPT Inlet / Outlet

Features:

• Unique Valve Design
• Improves Flow Quantity; Quality
• Supports Engines Up To 550 HP
• Hi-Vol 3/8 in. NPT Inlet/Outlet
• Produces 6 psi
• Gasoline Or Mixed Fuels Only

Part Number: 2358-05327557

Notes: Electric Fuel Pump -- Includes Tank Seal; Strainer required to validate the warranty: F216S

Part Number: 2358-07290947

Notes: Electric Fuel Pump

Part Number: 2358-05661593

Notes: Electric Fuel Pump -- Connector PINS Qty On Main Connector: 4PINS; Fuel Level Sensor Resitance Range: N/A; Fuel Tube Connection Type: Quick Connect; GPH (Gallons Per Hour Flow): 38.7-48; Max Pressure (PSI): 72.5-101.5; Strainer Included: no

Position: In-Tank

Part Number: 2358-04081674

Notes: ELECTRIC FUEL PUMP; NEW STRAINER REQUIRED FOR WARRANTY

Quality: Premium - High quality new replacement part.

Part Number: 2358-07965674

Notes: Electric Fuel Pump -- Turbo; L4 2.2L

Features:

• Direct Fit Replacement

Part Number: 2358-03653037

Notes: Hi-Performance In-Tank Fuel Pump -- 350 HP+; 190 lph; Larger Inlet Hole In Center Of Bottom Of Pump To Smaller Port Outlet; Gerotor Style; Pump Only

Features:

• Universal Intank Fuel Pump

Part Number: 2358-07744567

Notes: Electric Fuel Pump

Part Number: 2358-07779892

Notes: Electric Fuel Pump -- Includes Tank Seal; Strainer required to validate the warranty