1985 GMC C3500 Universal Joint

Part Number: 3870-05266660

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Greasable Super Strength U-Joint; with 1-3/16in O.D. Bearing(s)

Features:

• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants
• Flush lube fitting in the bearing cap for added strength
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength

Position: At Transmission

Part Number: 3870-05266660

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Greasable Super Strength U-Joint; with 1-3/16in O.D. Bearing(s)

Features:

• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants
• Flush lube fitting in the bearing cap for added strength
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength

Position: At Rear Axle

Part Number: 3870-05266660

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Greasable Super Strength U-Joint; with 1-3/16in O.D. Bearing(s)

Features:

• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants
• Flush lube fitting in the bearing cap for added strength
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength

Position: At Center Bearing

Part Number: 3870-05266659

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Non-Greasable Super Strength U-Joint; with 1.188in O.D. Bearing(s)

Features:

• Eliminates grease passages in the cross for maximum strength in high torque applications
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants

Position: At Transmission

Part Number: 3870-05266659

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Non-Greasable Super Strength U-Joint; with 1.188in O.D. Bearing(s)

Features:

• Eliminates grease passages in the cross for maximum strength in high torque applications
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants

Position: At Rear Axle

Part Number: 3870-05266659

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Non-Greasable Super Strength U-Joint; with 1.188in O.D. Bearing(s)

Features:

• Eliminates grease passages in the cross for maximum strength in high torque applications
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants

Position: At Center Bearing

Part Number: 3870-05266683

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Premium; with 1.188in O.D. Bearing(s)

Features:

• Needle bearings and snap rings from an original equipment supplier
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Cross forging shape and flash provide easier installation and high strength
• Greaseable - allows new grease to flush out contamination and moisture reducing corrosion and wear
• Nitrile rubber grease seals have compressed double lip design for protection from contaminants
• Bearing cups ground and slightly oversized to fit in a used drive shaft

Position: At Transmission

Part Number: 3870-05266683

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Premium; with 1.188in O.D. Bearing(s)

Features:

• Needle bearings and snap rings from an original equipment supplier
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Cross forging shape and flash provide easier installation and high strength
• Greaseable - allows new grease to flush out contamination and moisture reducing corrosion and wear
• Nitrile rubber grease seals have compressed double lip design for protection from contaminants
• Bearing cups ground and slightly oversized to fit in a used drive shaft

Position: At Rear Axle

Part Number: 3870-05266683

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Premium; with 1.188in O.D. Bearing(s)

Features:

• Needle bearings and snap rings from an original equipment supplier
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Cross forging shape and flash provide easier installation and high strength
• Greaseable - allows new grease to flush out contamination and moisture reducing corrosion and wear
• Nitrile rubber grease seals have compressed double lip design for protection from contaminants
• Bearing cups ground and slightly oversized to fit in a used drive shaft

Position: At Center Bearing