1985 GMC C3500 Universal Joint

Part Number: 3870-07506239

Notes: Universal Joint -- 3 Joint Shaft; High Performance; With 1-3/16" O.D. Bearings

Position: At Center Bearing

Part Number: 3870-07506239

Notes: Universal Joint -- 3 Joint Shaft; High Performance; With 1-3/16" O.D. Bearings

Position: At Rear Axle

Part Number: 3870-07506239

Notes: Universal Joint -- 3 Joint Shaft; High Performance; With 1-3/16" O.D. Bearings

Position: At Transmission

Part Number: 3870-07498893

Notes: Universal Joint -- 3 Joint Shaft; Non-Greaseable Super-Strength; With 1-3/16" O.D. Bearings

Position: At Center Bearing

Part Number: 3870-07498893

Notes: Universal Joint -- 3 Joint Shaft; Non-Greaseable Super-Strength; With 1-3/16" O.D. Bearings

Position: At Rear Axle

Part Number: 3870-07498893

Notes: Universal Joint -- 3 Joint Shaft; Non-Greaseable Super-Strength; With 1-3/16" O.D. Bearings

Position: At Transmission

Part Number: 3870-07760693

Notes: Universal Joint -- 3 Joint Shaft; Premium; With 1-3/16" O.D. Bearings

Position: At Center Bearing

Part Number: 3870-07760693

Notes: Universal Joint -- 3 Joint Shaft; Premium; With 1-3/16" O.D. Bearings

Position: At Rear Axle

Part Number: 3870-07760693

Notes: Universal Joint -- 3 Joint Shaft; Premium; With 1-3/16" O.D. Bearings

Position: At Transmission

Part Number: 3870-05266660

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Greasable Super Strength U-Joint; with 1-3/16in O.D. Bearing(s)

Features:

• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants
• Flush lube fitting in the bearing cap for added strength
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength

Position: At Center Bearing

Part Number: 3870-05266660

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Greasable Super Strength U-Joint; with 1-3/16in O.D. Bearing(s)

Features:

• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants
• Flush lube fitting in the bearing cap for added strength
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength

Position: At Rear Axle

Part Number: 3870-05266660

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Greasable Super Strength U-Joint; with 1-3/16in O.D. Bearing(s)

Features:

• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants
• Flush lube fitting in the bearing cap for added strength
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength

Position: At Transmission

Part Number: 3870-05266659

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Non-Greasable Super Strength U-Joint; with 1.188in O.D. Bearing(s)

Features:

• Eliminates grease passages in the cross for maximum strength in high torque applications
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants

Position: At Center Bearing

Part Number: 3870-05266659

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Non-Greasable Super Strength U-Joint; with 1.188in O.D. Bearing(s)

Features:

• Eliminates grease passages in the cross for maximum strength in high torque applications
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants

Position: At Rear Axle

Part Number: 3870-05266659

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Non-Greasable Super Strength U-Joint; with 1.188in O.D. Bearing(s)

Features:

• Eliminates grease passages in the cross for maximum strength in high torque applications
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants

Position: At Transmission

Part Number: 3870-05266683

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Premium; with 1.188in O.D. Bearing(s)

Features:

• Needle bearings and snap rings from an original equipment supplier
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Cross forging shape and flash provide easier installation and high strength
• Greaseable - allows new grease to flush out contamination and moisture reducing corrosion and wear
• Nitrile rubber grease seals have compressed double lip design for protection from contaminants
• Bearing cups ground and slightly oversized to fit in a used drive shaft

Position: At Center Bearing

Part Number: 3870-05266683

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Premium; with 1.188in O.D. Bearing(s)

Features:

• Needle bearings and snap rings from an original equipment supplier
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Cross forging shape and flash provide easier installation and high strength
• Greaseable - allows new grease to flush out contamination and moisture reducing corrosion and wear
• Nitrile rubber grease seals have compressed double lip design for protection from contaminants
• Bearing cups ground and slightly oversized to fit in a used drive shaft

Position: At Rear Axle

Part Number: 3870-05266683

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Premium; with 1.188in O.D. Bearing(s)

Features:

• Needle bearings and snap rings from an original equipment supplier
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Cross forging shape and flash provide easier installation and high strength
• Greaseable - allows new grease to flush out contamination and moisture reducing corrosion and wear
• Nitrile rubber grease seals have compressed double lip design for protection from contaminants
• Bearing cups ground and slightly oversized to fit in a used drive shaft

Position: At Transmission

Part Number: 3870-05899067

Notes: Universal Joint -- 1.188in Bearing Cap Diameter; Greaseable; with 3.625in Outside Snap Ring Dimension

Position: Rear Driveshaft at Rear Axle

Part Number: 3870-07886999

Notes: Universal Joint -- 1.188in Bearing Cap Diameter; Greaseable; with 3.625in Outside Snap Ring Dimension

Position: Rear Driveshaft at Rear Axle

Part Number: 3870-05899067

Notes: Universal Joint -- 1.188in Bearing Cap Diameter; Greaseable; with 3.625in Outside Snap Ring Dimension

Position: Rear Driveshaft at Support Bearing

Part Number: 3870-07886999

Notes: Universal Joint -- 1.188in Bearing Cap Diameter; Greaseable; with 3.625in Outside Snap Ring Dimension

Position: Rear Driveshaft at Support Bearing

Part Number: 3870-05899067

Notes: Universal Joint -- 1.188in Bearing Cap Diameter; Greaseable; with 3.625in Outside Snap Ring Dimension

Position: Rear Driveshaft at Transmission

Part Number: 3870-07886999

Notes: Universal Joint -- 1.188in Bearing Cap Diameter; Greaseable; with 3.625in Outside Snap Ring Dimension

Position: Rear Driveshaft at Transmission

Part Number: 3870-07126383

Notes: Universal Joint -- 1.188in Bearing Cap Diameter; Greaseable; with 3.625in Outside Snap Ring Dimension; with Uncoated

Position: Rear Driveshaft at Rear Axle

Part Number: 3870-07126383

Notes: Universal Joint -- 1.188in Bearing Cap Diameter; Greaseable; with 3.625in Outside Snap Ring Dimension; with Uncoated

Position: Rear Driveshaft at Support Bearing

Part Number: 3870-07126383

Notes: Universal Joint -- 1.188in Bearing Cap Diameter; Greaseable; with 3.625in Outside Snap Ring Dimension; with Uncoated

Position: Rear Driveshaft at Transmission

Part Number: 3870-05100140

Notes: Universal Joint -- 1.188in Bearing Cap Diameter; Non-Greasable; with 3.625in Outside Snap Ring Dimension; with Uncoated

Position: Rear Driveshaft at Rear Axle

Part Number: 3870-05100140

Notes: Universal Joint -- 1.188in Bearing Cap Diameter; Non-Greasable; with 3.625in Outside Snap Ring Dimension; with Uncoated

Position: Rear Driveshaft at Support Bearing

Part Number: 3870-05100140

Notes: Universal Joint -- 1.188in Bearing Cap Diameter; Non-Greasable; with 3.625in Outside Snap Ring Dimension; with Uncoated

Position: Rear Driveshaft at Transmission

Part Number: 3870-05408400

Notes: Professional -- New; 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing Outside Diameter; Greasable Super Strength U-Joint

Position: At Center Bearing

Part Number: 3870-05408400

Notes: Professional -- New; 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing Outside Diameter; Greasable Super Strength U-Joint

Position: At Rear Axle

Part Number: 3870-05408400

Notes: Professional -- New; 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing Outside Diameter; Greasable Super Strength U-Joint

Position: At Transmission

Part Number: 3870-05429708

Notes: Professional -- New; 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing Outside Diameter; Non-Greasable Super Strength U-Joint

Position: At Center Bearing

Part Number: 3870-05429708

Notes: Professional -- New; 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing Outside Diameter; Non-Greasable Super Strength U-Joint

Position: At Rear Axle

Part Number: 3870-05429708

Notes: Professional -- New; 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing Outside Diameter; Non-Greasable Super Strength U-Joint

Position: At Transmission

Part Number: 3870-05408395

Notes: Professional -- New; 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing Outside Diameter; Premium; Greaseable

Position: At Center Bearing

Part Number: 3870-05408395

Notes: Professional -- New; 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing Outside Diameter; Premium; Greaseable

Position: At Rear Axle

Part Number: 3870-05408395

Notes: Professional -- New; 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing Outside Diameter; Premium; Greaseable

Position: At Transmission

Part Number: 3870-05984781

Notes: Universal Joint -- New; (SEE PROP.SHAFT CHART); Quantity Required Varies by Application; With INTERNAL SNAP RINGS

Position: Front Driveshaft at Front Axle

Part Number: 3870-07107149

Notes: Greasable Super Strength -- 1-3/16" Bearing Outside Diameter

Position: At Center Bearing

Part Number: 3870-07107149

Notes: Greasable Super Strength -- 1-3/16" Bearing Outside Diameter

Position: At Rear Axle

Part Number: 3870-07107149

Notes: Greasable Super Strength -- 1-3/16" Bearing Outside Diameter

Position: At Transmission

Part Number: 3870-07107147

Notes: Non-Greasable Super Strength -- 1-3/16" Bearing Outside Diameter

Position: At Center Bearing

Part Number: 3870-07107147

Notes: Non-Greasable Super Strength -- 1-3/16" Bearing Outside Diameter

Position: At Rear Axle

Part Number: 3870-07107147

Notes: Non-Greasable Super Strength -- 1-3/16" Bearing Outside Diameter

Position: At Transmission

Part Number: 3870-07107180

Notes: Premium -- 1-3/16" Bearing Outside Diameter; .059" Snap Ring Thickness

Position: At Center Bearing

Part Number: 3870-07107180

Notes: Premium -- 1-3/16" Bearing Outside Diameter; .059" Snap Ring Thickness

Position: At Rear Axle

Part Number: 3870-07107180

Notes: Premium -- 1-3/16" Bearing Outside Diameter; .059" Snap Ring Thickness

Position: At Transmission

Part Number: 3870-05343545

Notes: Universal Joint -- Grease Fitting in Cross; Performance Grade

Features:

• Manufactured to meet or exceed OEM specifications.

Position: Rear Shaft All Joints

Part Number: 3870-05343518

Notes: Universal Joint -- Standard Grade; Grease Fitting in Cross

Features:

• Manufactured to meet or exceed OEM specifications.

Position: Rear Shaft All Joints

Part Number: 3870-05343525

Notes: Universal Joint -- Standard Grade; Sealed Unit

Features:

• Manufactured to meet or exceed OEM specifications.

Position: Rear Shaft All Joints

Part Number: 3870-07521432

Notes: Universal Joint

Position: Rear

Part Number: 3870-07521432

Notes: Universal Joint

Position: Front

Part Number: 3870-07521432

Notes: Universal Joint

Position: Center

Part Number: 3870-05994309

Notes: Universal Joint -- (For Aluminum Drive Shaft)

Position: Rear

Part Number: 3870-05994309

Notes: Universal Joint -- (For Aluminum Drive Shaft)

Position: Front

Part Number: 3870-05994309

Notes: Universal Joint -- (For Aluminum Drive Shaft)

Position: Center

Part Number: 3870-07345688

Notes: Universal Joint -- Brute Force Greaseable

Position: Rear

Part Number: 3870-07345688

Notes: Universal Joint -- Brute Force Greaseable

Position: Front

Part Number: 3870-07345688

Notes: Universal Joint -- Brute Force Greaseable

Position: Center

Part Number: 3870-05979607

Notes: Universal Joint -- Brute Force Non Greaseable

Position: Rear

Part Number: 3870-05979607

Notes: Universal Joint -- Brute Force Non Greaseable

Position: Front

Part Number: 3870-05979607

Notes: Universal Joint -- Brute Force Non Greaseable

Position: Center

Part Number: 3870-05883680

Notes: Universal Joint

Position: Rear

Part Number: 3870-05883680

Notes: Universal Joint

Position: Front

Part Number: 3870-05883680

Notes: Universal Joint

Position: Center