1985 Dodge Aries Brake Caliper

Part Number: 1603-05747215

Notes: R-Line; Friction-Ready Caliper, Remanufactured -- Heavy Duty Brakes

Position: Front Left

Part Number: 1603-05747216

Notes: R-Line; Friction-Ready Caliper, Remanufactured -- Heavy Duty Brakes

Position: Front Right

Part Number: 1603-05747180

Notes: R-Line; Friction-Ready Caliper, Remanufactured -- With Standard Brakes

Position: Front Left

Part Number: 1603-05747181

Notes: R-Line; Friction-Ready Caliper, Remanufactured -- With Standard Brakes

Position: Front Right

Part Number: 1603-05097050

Notes: Unloaded Caliper -- Except Heavy Duty Brakes; with 7-7/8" Rear Brakes; Supplied without Mounting Bracket; with Metal Piston; Installation Hardware Included

Features:

• A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• Mounting bracket is included where applicable for a hassle-free installation.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New stainless steel hardware clips and new mounting pins are included where applicable.
• New washers are included where applicable for a proper seal.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Pistons are durable, resistant to cracking or pitting and handle great loads.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Show More
• Show Less

Position: Front Right

Part Number: 1603-05097051

Notes: Unloaded Caliper -- Except Heavy Duty Brakes; with 7-7/8" Rear Brakes; with Phenolic Piston; Supplied without Mounting Bracket; Installation Hardware Included

Features:

• A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• Mounting bracket is included where applicable for a hassle-free installation.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New stainless steel hardware clips and new mounting pins are included where applicable.
• New washers are included where applicable for a proper seal.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Pistons are durable, resistant to cracking or pitting and handle great loads.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Show More
• Show Less

Position: Front Left

Part Number: 1603-05097049

Notes: Unloaded Caliper -- Except Heavy Duty Brakes; with 7-7/8" Rear Brakes; with Phenolic Piston; Supplied without Mounting Bracket; Installation Hardware Included

Features:

• A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• Mounting bracket is included where applicable for a hassle-free installation.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New stainless steel hardware clips and new mounting pins are included where applicable.
• New washers are included where applicable for a proper seal.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Pistons are durable, resistant to cracking or pitting and handle great loads.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Show More
• Show Less

Position: Front Right

Part Number: 1603-05000270

Notes: Unloaded Caliper -- with Heavy Duty Brakes; with 8-5/8" Rear Brakes; Supplied without Mounting Bracket; with Metal Piston; Installation Hardware Included

Features:

• A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• Mounting bracket is included where applicable for a hassle-free installation.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New stainless steel hardware clips and new mounting pins are included where applicable.
• New washers are included where applicable for a proper seal.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Pistons are durable, resistant to cracking or pitting and handle great loads.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Show More
• Show Less

Position: Front Left

Part Number: 1603-05000269

Notes: Unloaded Caliper -- with Heavy Duty Brakes; with 8-5/8" Rear Brakes; Supplied without Mounting Bracket; with Metal Piston; Installation Hardware Included

Features:

• A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• Mounting bracket is included where applicable for a hassle-free installation.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New stainless steel hardware clips and new mounting pins are included where applicable.
• New washers are included where applicable for a proper seal.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Pistons are durable, resistant to cracking or pitting and handle great loads.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Show More
• Show Less

Position: Front Right

Part Number: 1603-05097048

Notes: Unloaded Caliper -- with Heavy Duty Brakes; with 8-5/8" Rear Brakes; with Phenolic Piston; Supplied without Mounting Bracket; Installation Hardware Included

Features:

• A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• Mounting bracket is included where applicable for a hassle-free installation.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New stainless steel hardware clips and new mounting pins are included where applicable.
• New washers are included where applicable for a proper seal.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Pistons are durable, resistant to cracking or pitting and handle great loads.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Show More
• Show Less

Position: Front Left

Part Number: 1603-05097047

Notes: Unloaded Caliper -- with Heavy Duty Brakes; with 8-5/8" Rear Brakes; with Phenolic Piston; Supplied without Mounting Bracket; Installation Hardware Included

Features:

• A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• Mounting bracket is included where applicable for a hassle-free installation.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New stainless steel hardware clips and new mounting pins are included where applicable.
• New washers are included where applicable for a proper seal.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Pistons are durable, resistant to cracking or pitting and handle great loads.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Show More
• Show Less

Position: Front Right

Part Number: 1603-05000465

Notes: Unloaded Caliper With Bracket -- Except Heavy Duty Brakes; with 7-7/8" Rear Brakes; with Phenolic Piston; Supplied with Mounting Bracket; Installation Hardware Included

Features:

• A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• Mounting bracket is included where applicable for a hassle-free installation.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New stainless steel hardware clips and new mounting pins are included where applicable.
• New washers are included where applicable for a proper seal.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Pistons are durable, resistant to cracking or pitting and handle great loads.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Show More
• Show Less

Position: Front Left

Part Number: 1603-05000464

Notes: Unloaded Caliper With Bracket -- Except Heavy Duty Brakes; with 7-7/8" Rear Brakes; with Phenolic Piston; Supplied with Mounting Bracket; Installation Hardware Included

Features:

• A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• Mounting bracket is included where applicable for a hassle-free installation.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New stainless steel hardware clips and new mounting pins are included where applicable.
• New washers are included where applicable for a proper seal.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Pistons are durable, resistant to cracking or pitting and handle great loads.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Show More
• Show Less

Position: Front Right

Part Number: 1603-05231241

Notes: Unloaded Caliper With Bracket -- with Heavy Duty Brakes; with 8-5/8" Rear Brakes; Supplied with Mounting Bracket; with Metal Piston; Installation Hardware Included

Features:

• A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• Mounting bracket is included where applicable for a hassle-free installation.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New stainless steel hardware clips and new mounting pins are included where applicable.
• New washers are included where applicable for a proper seal.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Pistons are durable, resistant to cracking or pitting and handle great loads.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Show More
• Show Less

Position: Front Left

Part Number: 1603-05231240

Notes: Unloaded Caliper With Bracket -- with Heavy Duty Brakes; with 8-5/8" Rear Brakes; Supplied with Mounting Bracket; with Metal Piston; Installation Hardware Included

Features:

• A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• Mounting bracket is included where applicable for a hassle-free installation.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New stainless steel hardware clips and new mounting pins are included where applicable.
• New washers are included where applicable for a proper seal.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Pistons are durable, resistant to cracking or pitting and handle great loads.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Show More
• Show Less

Position: Front Right

Part Number: 1603-09001110

Notes: Unloaded Caliper With Bracket -- with Heavy Duty Brakes; with 8-5/8" Rear Brakes; with Phenolic Piston; Supplied with Mounting Bracket; Installation Hardware Included

Features:

• A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• Mounting bracket is included where applicable for a hassle-free installation.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New stainless steel hardware clips and new mounting pins are included where applicable.
• New washers are included where applicable for a proper seal.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Pistons are durable, resistant to cracking or pitting and handle great loads.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Show More
• Show Less

Position: Front Left

Part Number: 1603-09001109

Notes: Unloaded Caliper With Bracket -- with Heavy Duty Brakes; with 8-5/8" Rear Brakes; with Phenolic Piston; Supplied with Mounting Bracket; Installation Hardware Included

Features:

• A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• Mounting bracket is included where applicable for a hassle-free installation.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New stainless steel hardware clips and new mounting pins are included where applicable.
• New washers are included where applicable for a proper seal.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Pistons are durable, resistant to cracking or pitting and handle great loads.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Show More
• Show Less

Position: Front Right

Part Number: 1603-05134237

Notes: Premium Semi-Loaded Caliper-Preferred -- Heavy Duty

Position: Front Left

Part Number: 1603-05134236

Notes: Premium Semi-Loaded Caliper-Preferred -- Heavy Duty

Position: Front Right

Part Number: 1603-05117194

Notes: Premium Semi-Loaded Caliper-Preferred -- Standard Duty

Position: Front Left

Part Number: 1603-05117193

Notes: Premium Semi-Loaded Caliper-Preferred -- Standard Duty

Position: Front Right

Part Number: 1603-05097052

Notes: Unloaded Caliper -- Except Heavy Duty Brakes; with 7-7/8" Rear Brakes; Supplied without Mounting Bracket; with Metal Piston; Installation Hardware Included

Features:

• A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• Mounting bracket is included where applicable for a hassle-free installation.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New stainless steel hardware clips and new mounting pins are included where applicable.
• New washers are included where applicable for a proper seal.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Pistons are durable, resistant to cracking or pitting and handle great loads.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Show More
• Show Less

Position: Front Left

Part Number: 1603-05231243

Notes: Unloaded Caliper With Bracket -- Except Heavy Duty Brakes; with 7-7/8" Rear Brakes; Supplied with Mounting Bracket; with Metal Piston; Installation Hardware Included

Features:

• A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• Mounting bracket is included where applicable for a hassle-free installation.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New stainless steel hardware clips and new mounting pins are included where applicable.
• New washers are included where applicable for a proper seal.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Pistons are durable, resistant to cracking or pitting and handle great loads.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Show More
• Show Less

Position: Front Left

Part Number: 1603-05231242

Notes: Unloaded Caliper With Bracket -- Except Heavy Duty Brakes; with 7-7/8" Rear Brakes; Supplied with Mounting Bracket; with Metal Piston; Installation Hardware Included

Features:

• A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• Mounting bracket is included where applicable for a hassle-free installation.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New stainless steel hardware clips and new mounting pins are included where applicable.
• New washers are included where applicable for a proper seal.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Pistons are durable, resistant to cracking or pitting and handle great loads.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Show More
• Show Less

Position: Front Right