1984 Mercedes 300TD A/C Compressor

Part Number: 6233-08004617

Notes: A/C Compressor with Clutch (R-4 Type)

Part Number: 6233-09057180

Notes: New Compressor -- With R4 Compressor; New With Clutch; Compressor may differ in appearance from OE. Please refer to installation kit provided.

Features:

• V-Belt
• All compressors go through sophisticated testing and leak test processes
• Includes specific electrical connector to eliminate splicing
• For ease of installation this compressor includes all gaskets, o-rings or sealing washers needed to repair your car
• Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function, and durability
• Double lip shaft seal to reduce refrigerant leakage over time requiring less maintenance

Part Number: W0133-2057309

Notes: Reman - with Clutch - GM Radial R-4 version Compressors having stepped ports require the the following seals be installed in the following manner : The large brass seal is only for the suction port. The green seal is to be used on the discharge port. The short(er) of the two sleeves is to be used in conjunction with the green seal. This centers the seal, which is essential to prevent leakage. The two other seals in the kit are not applicable for Mercedes. These seals will only be used in compressors having a stepped port configuration. See 24 342

Part Number: 6233-05040517

Notes: Remanufactured Compressor -- With R4 Compressor; Remanufactured With Clutch

Features:

• V-Belt
• All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes.
• Tested for noise, vibration, durability, vacuum decay, and pressure decay to ensure no leaks and longer life
• Contains R-12/R-134a compatible gaskets, o-rings, or seals to properly replace the product
• Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function, and durability
• 100% new pistons and yokes in R4 compressors and a stainless steel reed valve

Part Number: 6233-05152968

Notes: Remanufactured Compressor -- With R4 Compressor; Remanufactured Without Clutch

Features:

• All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes.
• Tested for noise, vibration, durability, vacuum decay, and pressure decay to ensure no leaks and longer life
• Contains R-12/R-134a compatible gaskets, o-rings, or seals to properly replace the product
• Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function, and durability
• 100% new pistons and yokes in R4 compressors and a stainless steel reed valve

Part Number: 6233-05483184

Notes: A/C Compressor -- New - With Clutch; With R4 Compressor; 9 O'Clock Coil; Due To New Enhancements Compressor May Appear Different From The OE Unit; Please Refer To The Installation Kit Provided With Each Compressor.; Replacement Of Stretch Fit Belt Is Recommended

Part Number: 6233-05767482

Notes: Professional -- Remanufactured; With R4 Compressor; Remanufactured With Clutch

Part Number: W0133-2057309

Notes: Professional Remanufactured - GM Radial R-4 version Compressors having stepped ports require the the following seals be installed in the following manner : The large brass seal is only for the suction port. The green seal is to be used on the discharge port. The short(er) of the two sleeves is to be used in conjunction with the green seal. This centers the seal, which is essential to prevent leakage. The two other seals in the kit are not applicable for Mercedes. These seals will only be used in compressors having a stepped port configuration. See 24 342

Product Remark: w/ Clutch

Part Number: W0133-2075897

Notes: New - with Clutch - GM Radial R-4 version Compressors having stepped ports require the the following seals be installed in the following manner : The large brass seal is only for the suction port. The green seal is to be used on the discharge port. The short(er) of the two sleeves is to be used in conjunction with the green seal. This centers the seal, which is essential to prevent leakage. The two other seals in the kit are not applicable for Mercedes. These seals will only be used in compressors having a stepped port configuration. See 24 342

Features:

• OEM Quality Direct fit Application
• Brand new with no remanufactured parts
• Includes installation instructions and all necessary fitment components.