1982 GMC C2500 Universal Joint

Part Number: 3821-07868995

Notes: Universal Joint -- 3 Joint Shaft; High Performance; With 1-1/8" O.D. Bearings; With Inside Lock Rings

Position: At Center Bearing

Part Number: 3821-07868995

Notes: Universal Joint -- 3 Joint Shaft; High Performance; With 1-1/8" O.D. Bearings; With Inside Lock Rings

Position: At Rear Axle

Part Number: 3821-07868995

Notes: Universal Joint -- 3 Joint Shaft; High Performance; With 1-1/8" O.D. Bearings; With Inside Lock Rings

Position: At Transmission

Part Number: 3821-07498893

Notes: Universal Joint -- 3 Joint Shaft; Non-Greaseable Super-Strength; With 1-3/16" O.D. Bearings; With Outside Lock Rings

Position: At Center Bearing

Part Number: 3821-07498893

Notes: Universal Joint -- 3 Joint Shaft; Non-Greaseable Super-Strength; With 1-3/16" O.D. Bearings; With Outside Lock Rings

Position: At Rear Axle

Part Number: 3821-07498893

Notes: Universal Joint -- 3 Joint Shaft; Non-Greaseable Super-Strength; With 1-3/16" O.D. Bearings; With Outside Lock Rings

Position: At Transmission

Part Number: 3821-07319925

Notes: Universal Joint -- 3 Joint Shaft; Premium; With 1-1/8" O.D. Bearings; With Inside Lock Rings

Position: At Center Bearing

Part Number: 3821-07319925

Notes: Universal Joint -- 3 Joint Shaft; Premium; With 1-1/8" O.D. Bearings; With Inside Lock Rings

Position: At Rear Axle

Part Number: 3821-07319925

Notes: Universal Joint -- 3 Joint Shaft; Premium; With 1-1/8" O.D. Bearings; With Inside Lock Rings

Position: At Transmission

Part Number: 3821-07760693

Notes: Universal Joint -- 3 Joint Shaft; Premium; With 1-3/16" O.D. Bearings; With Outside Lock Rings

Position: At Center Bearing

Part Number: 3821-07760693

Notes: Universal Joint -- 3 Joint Shaft; Premium; With 1-3/16" O.D. Bearings; With Outside Lock Rings

Position: At Rear Axle

Part Number: 3821-07760693

Notes: Universal Joint -- 3 Joint Shaft; Premium; With 1-3/16" O.D. Bearings; With Outside Lock Rings

Position: At Transmission

Part Number: 3821-05266660

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Outside Lock Rings; Greasable Super Strength U-Joint; with 1-3/16in O.D. Bearing(s)

Features:

• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants
• Flush lube fitting in the bearing cap for added strength
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength

Position: At Center Bearing

Part Number: 3821-05266660

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Outside Lock Rings; Greasable Super Strength U-Joint; with 1-3/16in O.D. Bearing(s)

Features:

• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants
• Flush lube fitting in the bearing cap for added strength
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength

Position: At Rear Axle

Part Number: 3821-05266660

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Outside Lock Rings; Greasable Super Strength U-Joint; with 1-3/16in O.D. Bearing(s)

Features:

• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants
• Flush lube fitting in the bearing cap for added strength
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength

Position: At Transmission

Part Number: 3821-05266659

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Outside Lock Rings; Non-Greasable Super Strength U-Joint; with 1.188in O.D. Bearing(s)

Features:

• Eliminates grease passages in the cross for maximum strength in high torque applications
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants

Position: At Center Bearing

Part Number: 3821-05266659

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Outside Lock Rings; Non-Greasable Super Strength U-Joint; with 1.188in O.D. Bearing(s)

Features:

• Eliminates grease passages in the cross for maximum strength in high torque applications
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants

Position: At Rear Axle

Part Number: 3821-05266659

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Outside Lock Rings; Non-Greasable Super Strength U-Joint; with 1.188in O.D. Bearing(s)

Features:

• Eliminates grease passages in the cross for maximum strength in high torque applications
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants

Position: At Transmission

Part Number: 3821-05266683

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Outside Lock Rings; Premium; with 1.188in O.D. Bearing(s)

Features:

• Needle bearings and snap rings from an original equipment supplier
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Cross forging shape and flash provide easier installation and high strength
• Greaseable - allows new grease to flush out contamination and moisture reducing corrosion and wear
• Nitrile rubber grease seals have compressed double lip design for protection from contaminants
• Bearing cups ground and slightly oversized to fit in a used drive shaft

Position: At Center Bearing

Part Number: 3821-05266683

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Outside Lock Rings; Premium; with 1.188in O.D. Bearing(s)

Features:

• Needle bearings and snap rings from an original equipment supplier
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Cross forging shape and flash provide easier installation and high strength
• Greaseable - allows new grease to flush out contamination and moisture reducing corrosion and wear
• Nitrile rubber grease seals have compressed double lip design for protection from contaminants
• Bearing cups ground and slightly oversized to fit in a used drive shaft

Position: At Rear Axle

Part Number: 3821-05266683

Notes: Universal Joint -- 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing O.D.; Outside Lock Rings; Premium; with 1.188in O.D. Bearing(s)

Features:

• Needle bearings and snap rings from an original equipment supplier
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Cross forging shape and flash provide easier installation and high strength
• Greaseable - allows new grease to flush out contamination and moisture reducing corrosion and wear
• Nitrile rubber grease seals have compressed double lip design for protection from contaminants
• Bearing cups ground and slightly oversized to fit in a used drive shaft

Position: At Transmission

Part Number: 3821-03504524

Notes: Universal Joint -- with 1-1 / 8in Bearing O.D.; Inside Lock Rings; Premium

Features:

• Greaseable - allows new grease to flush out contamination and moisture reducing corrosion and wear
• Nitrile rubber grease seals have compressed double lip design for protection from contaminants
• Bearing cups ground and slightly oversized to fit in a used drive shaft
• Needle bearings and snap rings from an original equipment supplier
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Cross forging shape and flash provide easier installation and high strength

Position: At Center Bearing

Part Number: 3821-03504524

Notes: Universal Joint -- with 1-1 / 8in Bearing O.D.; Inside Lock Rings; Premium

Features:

• Greaseable - allows new grease to flush out contamination and moisture reducing corrosion and wear
• Nitrile rubber grease seals have compressed double lip design for protection from contaminants
• Bearing cups ground and slightly oversized to fit in a used drive shaft
• Needle bearings and snap rings from an original equipment supplier
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Cross forging shape and flash provide easier installation and high strength

Position: At Rear Axle

Part Number: 3821-03504524

Notes: Universal Joint -- with 1-1 / 8in Bearing O.D.; Inside Lock Rings; Premium

Features:

• Greaseable - allows new grease to flush out contamination and moisture reducing corrosion and wear
• Nitrile rubber grease seals have compressed double lip design for protection from contaminants
• Bearing cups ground and slightly oversized to fit in a used drive shaft
• Needle bearings and snap rings from an original equipment supplier
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Cross forging shape and flash provide easier installation and high strength

Position: At Transmission

Part Number: 3821-05266661

Notes: Universal Joint -- with 1-1/8in Bearing O.D.; Inside Lock Rings; Greasable Super Strength U-Joint

Features:

• Flush lube fitting in the bearing cap for added strength
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants

Position: At Center Bearing

Part Number: 3821-05266661

Notes: Universal Joint -- with 1-1/8in Bearing O.D.; Inside Lock Rings; Greasable Super Strength U-Joint

Features:

• Flush lube fitting in the bearing cap for added strength
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants

Position: At Rear Axle

Part Number: 3821-05266661

Notes: Universal Joint -- with 1-1/8in Bearing O.D.; Inside Lock Rings; Greasable Super Strength U-Joint

Features:

• Flush lube fitting in the bearing cap for added strength
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength
• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants

Position: At Transmission

Part Number: 3821-05267754

Notes: Universal Joint -- with 1-1/8in Bearing O.D.; Inside Lock Rings; Non-Greasable Super Strength U-Joint

Features:

• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants
• Eliminates grease passages in the cross for maximum strength in high torque applications
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength

Position: At Center Bearing

Part Number: 3821-05267754

Notes: Universal Joint -- with 1-1/8in Bearing O.D.; Inside Lock Rings; Non-Greasable Super Strength U-Joint

Features:

• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants
• Eliminates grease passages in the cross for maximum strength in high torque applications
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength

Position: At Rear Axle

Part Number: 3821-05267754

Notes: Universal Joint -- with 1-1/8in Bearing O.D.; Inside Lock Rings; Non-Greasable Super Strength U-Joint

Features:

• Super Strength?äó alloy steel crosses for higher torque and horsepower
• Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
• Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants
• Eliminates grease passages in the cross for maximum strength in high torque applications
• Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
• Consistent heat treatment achieves good bearing hardness for durable wear and strength

Position: At Transmission

Part Number: 3821-07975685

Notes: FSFT -- with Inside Snap Rings; 1.125in Bearing Cap Diameter; Greaseable; Inside Snap Ring Dimension of 2.556in; with 2 Piece Drive Shaft

Position: Rear Driveshaft at Rear Axle

Part Number: 3821-07975685

Notes: FSFT -- with Inside Snap Rings; 1.125in Bearing Cap Diameter; Greaseable; Inside Snap Ring Dimension of 2.556in; with 2 Piece Drive Shaft

Position: Rear Driveshaft at Support Bearing

Part Number: 3821-07975685

Notes: FSFT -- with Inside Snap Rings; 1.125in Bearing Cap Diameter; Greaseable; Inside Snap Ring Dimension of 2.556in; with 2 Piece Drive Shaft

Position: Rear Driveshaft at Transmission

Part Number: 3821-07448737

Notes: FSFT -- with Outside Snap Rings; 1.188in Bearing Cap Diameter; Greaseable; with 2 Piece Drive Shaft; with 3.625in Outside Snap Ring Dimension

Position: Rear Driveshaft at Rear Axle

Part Number: 3821-07448737

Notes: FSFT -- with Outside Snap Rings; 1.188in Bearing Cap Diameter; Greaseable; with 2 Piece Drive Shaft; with 3.625in Outside Snap Ring Dimension

Position: Rear Driveshaft at Support Bearing

Part Number: 3821-07448737

Notes: FSFT -- with Outside Snap Rings; 1.188in Bearing Cap Diameter; Greaseable; with 2 Piece Drive Shaft; with 3.625in Outside Snap Ring Dimension

Position: Rear Driveshaft at Transmission

Part Number: 3821-05899077

Notes: Universal Joint -- with Inside Snap Rings; 1.125in Bearing Cap Diameter; Greaseable; Inside Snap Ring Dimension of 2.556in; with 2 Piece Drive Shaft

Position: Rear Driveshaft at Rear Axle

Part Number: 3821-07898134

Notes: Universal Joint -- with Inside Snap Rings; 1.125in Bearing Cap Diameter; Greaseable; Inside Snap Ring Dimension of 2.556in; with 2 Piece Drive Shaft

Position: Rear Driveshaft at Rear Axle

Part Number: 3821-05899077

Notes: Universal Joint -- with Inside Snap Rings; 1.125in Bearing Cap Diameter; Greaseable; Inside Snap Ring Dimension of 2.556in; with 2 Piece Drive Shaft

Position: Rear Driveshaft at Support Bearing

Part Number: 3821-07898134

Notes: Universal Joint -- with Inside Snap Rings; 1.125in Bearing Cap Diameter; Greaseable; Inside Snap Ring Dimension of 2.556in; with 2 Piece Drive Shaft

Position: Rear Driveshaft at Support Bearing

Part Number: 3821-05899077

Notes: Universal Joint -- with Inside Snap Rings; 1.125in Bearing Cap Diameter; Greaseable; Inside Snap Ring Dimension of 2.556in; with 2 Piece Drive Shaft

Position: Rear Driveshaft at Transmission

Part Number: 3821-07898134

Notes: Universal Joint -- with Inside Snap Rings; 1.125in Bearing Cap Diameter; Greaseable; Inside Snap Ring Dimension of 2.556in; with 2 Piece Drive Shaft

Position: Rear Driveshaft at Transmission

Part Number: 3821-05899067

Notes: Universal Joint -- with Outside Snap Rings; 1.188in Bearing Cap Diameter; Greaseable; with 2 Piece Drive Shaft; with 3.625in Outside Snap Ring Dimension

Position: Rear Driveshaft at Rear Axle

Part Number: 3821-07886999

Notes: Universal Joint -- with Outside Snap Rings; 1.188in Bearing Cap Diameter; Greaseable; with 2 Piece Drive Shaft; with 3.625in Outside Snap Ring Dimension

Position: Rear Driveshaft at Rear Axle

Part Number: 3821-05899067

Notes: Universal Joint -- with Outside Snap Rings; 1.188in Bearing Cap Diameter; Greaseable; with 2 Piece Drive Shaft; with 3.625in Outside Snap Ring Dimension

Position: Rear Driveshaft at Support Bearing

Part Number: 3821-07886999

Notes: Universal Joint -- with Outside Snap Rings; 1.188in Bearing Cap Diameter; Greaseable; with 2 Piece Drive Shaft; with 3.625in Outside Snap Ring Dimension

Position: Rear Driveshaft at Support Bearing

Part Number: 3821-05899067

Notes: Universal Joint -- with Outside Snap Rings; 1.188in Bearing Cap Diameter; Greaseable; with 2 Piece Drive Shaft; with 3.625in Outside Snap Ring Dimension

Position: Rear Driveshaft at Transmission

Part Number: 3821-07886999

Notes: Universal Joint -- with Outside Snap Rings; 1.188in Bearing Cap Diameter; Greaseable; with 2 Piece Drive Shaft; with 3.625in Outside Snap Ring Dimension

Position: Rear Driveshaft at Transmission

Part Number: 3821-05408400

Notes: Professional -- New; 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing Outside Diameter; Outside Lock Rings; Greasable Super Strength U-Joint

Position: At Center Bearing

Part Number: 3821-05408400

Notes: Professional -- New; 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing Outside Diameter; Outside Lock Rings; Greasable Super Strength U-Joint

Position: At Rear Axle

Part Number: 3821-05408400

Notes: Professional -- New; 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing Outside Diameter; Outside Lock Rings; Greasable Super Strength U-Joint

Position: At Transmission

Part Number: 3821-05429708

Notes: Professional -- New; 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing Outside Diameter; Outside Lock Rings; Non-Greasable Super Strength U-Joint

Position: At Center Bearing

Part Number: 3821-05429708

Notes: Professional -- New; 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing Outside Diameter; Outside Lock Rings; Non-Greasable Super Strength U-Joint

Position: At Rear Axle

Part Number: 3821-05429708

Notes: Professional -- New; 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing Outside Diameter; Outside Lock Rings; Non-Greasable Super Strength U-Joint

Position: At Transmission

Part Number: 3821-05408395

Notes: Professional -- New; 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing Outside Diameter; Outside Lock Rings; Premium; Greaseable

Position: At Center Bearing

Part Number: 3821-05408395

Notes: Professional -- New; 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing Outside Diameter; Outside Lock Rings; Premium; Greaseable

Position: At Rear Axle

Part Number: 3821-05408395

Notes: Professional -- New; 1.188in Bearing Caps; SNAP RING THICKNESS .059"; with Steel Driveshaft; with 1-3/16in Bearing Outside Diameter; Outside Lock Rings; Premium; Greaseable

Position: At Transmission

Part Number: 3821-05408401

Notes: Professional -- New; with 1-1/8in Bearing Outside Diameter; Inside Lock Rings; Greasable Super Strength U-Joint

Position: At Center Bearing

Part Number: 3821-05408401

Notes: Professional -- New; with 1-1/8in Bearing Outside Diameter; Inside Lock Rings; Greasable Super Strength U-Joint

Position: At Rear Axle

Part Number: 3821-05408401

Notes: Professional -- New; with 1-1/8in Bearing Outside Diameter; Inside Lock Rings; Greasable Super Strength U-Joint

Position: At Transmission

Part Number: 3821-05430328

Notes: Professional -- New; with 1-1/8in Bearing Outside Diameter; Inside Lock Rings; Non-Greasable Super Strength U-Joint

Position: At Center Bearing

Part Number: 3821-05430328

Notes: Professional -- New; with 1-1/8in Bearing Outside Diameter; Inside Lock Rings; Non-Greasable Super Strength U-Joint

Position: At Rear Axle

Part Number: 3821-05430328

Notes: Professional -- New; with 1-1/8in Bearing Outside Diameter; Inside Lock Rings; Non-Greasable Super Strength U-Joint

Position: At Transmission

Part Number: 3821-05408399

Notes: Professional -- New; with 1-1/8in Bearing Outside Diameter; Inside Lock Rings; Premium; Greaseable

Position: At Center Bearing

Part Number: 3821-05408399

Notes: Professional -- New; with 1-1/8in Bearing Outside Diameter; Inside Lock Rings; Premium; Greaseable

Position: At Rear Axle

Part Number: 3821-05408399

Notes: Professional -- New; with 1-1/8in Bearing Outside Diameter; Inside Lock Rings; Premium; Greaseable

Position: At Transmission

Part Number: 3821-05984781

Notes: Universal Joint -- New; (SEE PROP.SHAFT CHART); With INTERNAL SNAP RINGS; Quantity Required Varies by Application

Part Number: 3821-05343545

Notes: BFBQ -- Grease Fitting in Cross; 2 Joint Driveshaft; Performance Grade

Features:

• Manufactured to meet or exceed OEM specifications.

Position: Rear Shaft All Joints

Part Number: 3821-05343545

Notes: BFBQ -- Grease Fitting in Cross; 3 Joint Driveshaft; Performance Grade

Features:

• Manufactured to meet or exceed OEM specifications.

Position: Rear Shaft All Joints

Part Number: 3821-05343525

Notes: BFBQ -- Standard Grade; 2 Joint Driveshaft; Sealed Unit

Features:

• Manufactured to meet or exceed OEM specifications.

Position: Rear Shaft All Joints

Part Number: 3821-05343525

Notes: BFBQ -- Standard Grade; 3 Joint Driveshaft; Sealed Unit

Features:

• Manufactured to meet or exceed OEM specifications.

Position: Rear Shaft All Joints

Part Number: 3821-05343518

Notes: BFBQ -- Standard Grade; Grease Fitting in Cross; 2 Joint Driveshaft

Features:

• Manufactured to meet or exceed OEM specifications.

Position: Rear Shaft All Joints

Part Number: 3821-05343518

Notes: BFBQ -- Standard Grade; Grease Fitting in Cross; 3 Joint Driveshaft

Features:

• Manufactured to meet or exceed OEM specifications.

Position: Rear Shaft All Joints

Part Number: 3821-07107152

Notes: Greasable Super Strength -- 1-1/8" Bearing Outside Diameter; Inside Lock Rings

Position: At Center Bearing

Part Number: 3821-07107152

Notes: Greasable Super Strength -- 1-1/8" Bearing Outside Diameter; Inside Lock Rings

Position: At Rear Axle

Part Number: 3821-07107152

Notes: Greasable Super Strength -- 1-1/8" Bearing Outside Diameter; Inside Lock Rings

Position: At Transmission

Part Number: 3821-07107149

Notes: Greasable Super Strength -- 1-3/16" Bearing Outside Diameter; Outside Lock Rings

Position: At Center Bearing

Part Number: 3821-07107149

Notes: Greasable Super Strength -- 1-3/16" Bearing Outside Diameter; Outside Lock Rings

Position: At Rear Axle

Part Number: 3821-07107149

Notes: Greasable Super Strength -- 1-3/16" Bearing Outside Diameter; Outside Lock Rings

Position: At Transmission

Part Number: 3821-07107151

Notes: Non-Greasable Super Strength -- 1-1/8" Bearing Outside Diameter; Inside Lock Rings

Position: At Center Bearing

Part Number: 3821-07107151

Notes: Non-Greasable Super Strength -- 1-1/8" Bearing Outside Diameter; Inside Lock Rings

Position: At Rear Axle

Part Number: 3821-07107151

Notes: Non-Greasable Super Strength -- 1-1/8" Bearing Outside Diameter; Inside Lock Rings

Position: At Transmission

Part Number: 3821-07107147

Notes: Non-Greasable Super Strength -- 1-3/16" Bearing Outside Diameter; Outside Lock Rings

Position: At Center Bearing

Part Number: 3821-07107147

Notes: Non-Greasable Super Strength -- 1-3/16" Bearing Outside Diameter; Outside Lock Rings

Position: At Rear Axle

Part Number: 3821-07107147

Notes: Non-Greasable Super Strength -- 1-3/16" Bearing Outside Diameter; Outside Lock Rings

Position: At Transmission

Part Number: 3821-07107257

Notes: Premium -- 1-1/8" Bearing Outside Diameter; Inside Lock Rings

Position: At Center Bearing

Part Number: 3821-07107257

Notes: Premium -- 1-1/8" Bearing Outside Diameter; Inside Lock Rings

Position: At Rear Axle

Part Number: 3821-07107257

Notes: Premium -- 1-1/8" Bearing Outside Diameter; Inside Lock Rings

Position: At Transmission