1978 GMC C25 Window Motor

Part Number: 3817-07438089

Notes: Power Window Motor -- 76-81 GM Various Models Power Window Motor Front or Rear Left or Right with 12 Tooth Gear|Verify Application Prior To Purchase | Some Motors Installed Incorrectly At Factory

Product Remark: with 12 Tooth Gear

Part Number: 3817-07473582

Notes: Power Window Motor -- 76-90 GM Various Models Power Window Motor Front or Rear Left or Right/Tailgate with 12 Tooth Gear|Verify Application Prior To Purchase| Some Motors Installed Incorrectly At Factory

Product Remark: with 12 Tooth Gear

Part Number: 3817-05351988

Notes: Power Window Motor -- Gear not Included; without Regulator

Features:

• Brushes are precisely designed to ensure armature and contacts are properly matched
• Designed with a stronger, less brittle material than O.E. to prevent premature wear, stripping and breakage
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life
• Guaranteed fit and function
• Load testing ensures guaranteed performance every time
• Magnets deliver the right amount of torque needed to withstand extreme weather conditions and to compensate for other worn components in the window lift system
• Meets or exceeds O.E.M. performance
• Units are designed with extra torque motors to prevent premature failure resulting from improperly lubricated window lift regulators
• Show More
• Show Less

Position: Front Left

Part Number: 3817-05002961

Notes: Power Window Motor -- Gear not Included; without Regulator

Features:

• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Each motor is 100% tested. Testing includes loading the motor on a simulated window fixture to verify speed and strength of the motor
• Every motor has its internal components inspected and gauged. Bushings are gauged and re-impregnated with lubricating oil, ball bearings are replaced with new and armatures are fully tested to ensure insulation
• Every remanufactured motor is assembled with the precise amount of lubricant to ensure quiet operation and long life
• Every remanufactured motor is fully compatible with the O.E. mounting and regulator
• For motors which have an auto up / down feature, output signals and pulse counts are matched to the vehicle application and motors are shipped in the 'full up position'
• Internal gears are gauged, inspected and renewed for reuse or replaced if out of spec. Replacement gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, stripping and breakage
• Motor magnets are 100% recharged, guaranteeing efficiency and reliability
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Show More
• Show Less

Position: Front Left

Part Number: 3817-05363418

Notes: Power Window Motor -- Gear not Included; without Regulator

Features:

• Brushes are precisely designed to ensure armature and contacts are properly matched
• Designed with a stronger, less brittle material than O.E. to prevent premature wear, stripping and breakage
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life
• Guaranteed fit and function
• Load testing ensures guaranteed performance every time
• Magnets deliver the right amount of torque needed to withstand extreme weather conditions and to compensate for other worn components in the window lift system
• Meets or exceeds O.E.M. performance
• Units are designed with extra torque motors to prevent premature failure resulting from improperly lubricated window lift regulators
• Show More
• Show Less

Position: Front Right

Part Number: 3817-05002971

Notes: Power Window Motor -- Gear not Included; without Regulator

Features:

• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Each motor is 100% tested. Testing includes loading the motor on a simulated window fixture to verify speed and strength of the motor
• Every motor has its internal components inspected and gauged. Bushings are gauged and re-impregnated with lubricating oil, ball bearings are replaced with new and armatures are fully tested to ensure insulation
• Every remanufactured motor is assembled with the precise amount of lubricant to ensure quiet operation and long life
• Every remanufactured motor is fully compatible with the O.E. mounting and regulator
• For motors which have an auto up / down feature, output signals and pulse counts are matched to the vehicle application and motors are shipped in the 'full up position'
• Internal gears are gauged, inspected and renewed for reuse or replaced if out of spec. Replacement gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, stripping and breakage
• Motor magnets are 100% recharged, guaranteeing efficiency and reliability
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Show More
• Show Less

Position: Front Right