Menu
Discount Auto Parts and Accessories
Checkout
Make/Model
toggle make model search
Close X
Search by Make / Model

1978 Ford Bronco Camshaft

Review Fitment Notes to Ensure Proper Fit
‹ Change Part / Category
‹ Change Vehicle
Related Parts
Camshaft
Change Category
Change Brand
Shop By Vehicle

Edelbrock Camshaft
Edelbrock logo
Edelbrock Camshaft
Click to Enlarge
Edelbrock Camshaft
Click to Enlarge
(Read reviews)
Our List Price: $279.95
(8) In Stock
Part Number: 4953-03643504
Notes: Rollin Thunder Camshaft -- Hyd Roller; 1500-6500rpm; Adv Dur at 0.050 Int / Exh 235 / 238 Deg.; Lift at Valve Int / Exh 0.573 / 0.583 in.; Lobe Spes 112 Deg. Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle; Designed For The Engine Swap Market~Idle Vacuum at 1000 RPM - 10 inch~Match With RPM Air-Gap Dual Quad 75354 and Performer RPM Heads 60255~Not Legal For Use On Pollution Controlled Vehicles~The Combo Produces 449hp and 413 ft.-lbs. of Torque
Features:
  • Use Only Stock Ratio Rocker Arms
  • Designed for 1500 to 6500 RPM Performance
  • More Lift And Duration Than Most Street Camshafts
  • Extensive Dyno And Real World Tested
  • Dyno-Matched/Street-Proven Performance
  • Matched to Edelbrock Performer RPM Intakes
  • Take the Guesswork Out of Camshaft Selection!
  • 10 To 12 in. Of Manifold Vacuum At Idle
Condition: New

Engine Make/Size Ford 351W
Exh. Duration @ .050 in. (Deg) 238
Exh. Duration Advertised (Deg) 302
Exhaust Valve Lift 0.582 in.
Intake Duration @ 0.050 in. 235 Degree
Intake Duration Advertised 299
Intake Valve Lift 0.573 in.
Lifter Type Hydraulic Roller
RPM Range 1500-6500
Usage OEM

Shipping Options:
Ground
This Part Fits: Catalog: F
Vehicle Engine
1978 Ford Bronco 5.8L V8 Windsor 

Melling Camshaft
Melling logo
Melling Camshaft
Click to Enlarge
(Read reviews)
Our List Price: $236.98
with FREE Shipping
(2) In Stock
Part Number: 4953-07980610
Notes: Performance -- Class 1, Good Idle With Low RPM Torque And Mid Range Performance; For Use With Retro-Fit Roller Lifter F1900RF16; Advertised Intake Duration 298; Advertised Exhaust Duration 282; Hydraulic Camshaft
Features:
  • High Performance Camshaft
  • Class I camshaft (200-215). Good idle quality. Low rpm torque and mid range performance. Will work with stock or slightly modified engine. Manual or auto transmission. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.
Condition: New

Lifter Type Retro-Fit Hyd. Roller
Exhaust Valve Lift 0.444 in
Intake Valve Lift 0.444 in
Exhaust Duration at .050 inch Lift 211 deg
Intake Duration at .050 Inch Lift 210 deg
Advertised Exhaust Duration 282 deg
Advertised Intake Duration 298 deg
Basic Operating RPM Range 2800 RPM
Cam Type Hydraulic Roller
Computer Controlled Compatible No
Exhaust Valve Lift with Factory Rocker Arm Ratio .710 in
Intake Valve Lift with Factory Rocker Arm Ratio .710 in
Lobe Separation 115 deg

Shipping Options:
Free Ground Shipping
This Part Fits: Catalog: C
Vehicle Engine
1978 Ford Bronco 5.8L V8 VIN: H Modified 

Melling Camshaft
Melling logo
Melling Camshaft
Click to Enlarge
(Read reviews)
Our List Price: $72.98
(8) In Stock
Part Number: 4953-07876861
Notes: Stock -- Class 1, Excellent Low End Torque And Horsepower; Good Idle And Daily Usage; High Output Engine; Use With 475054 High Performance Retainers; Or Use Intake Springs With Stock Intake Retainers On All Valves; Use With VS-270 Valve Spring. Installed Height 1.78 Inches; Not California Compliant
Features:
  • Class I camshaft (200-215). Good idle quality. Low rpm torque and mid range performance. Will work with stock or slightly modified engine. Manual or auto transmission. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.
Condition: New

Title Engine Camshaft
Lifter Type Solid
Exhaust Duration at .050 inch Lift 214
Intake Duration at .050 Inch Lift 204
Advertised Exhaust Duration 290
Advertised Intake Duration 280

Shipping Options:
Ground
This Part Fits: Catalog: C
Vehicle Engine
1978 Ford Bronco 5.8L V8 VIN: H Windsor 

Melling Camshaft
Melling logo
Melling Camshaft
Click to Enlarge
(Read reviews)
Our List Price: $83.98
(6) In Stock
Part Number: 4953-07525184
Notes: Stock -- Class 1, Excellent Low End Torque And Horsepower; Good Idle And Daily Usage; Use With VS-280 Valve Spring. Installed Height 1.82 Inches; Not California Compliant
Features:
  • Class I camshaft (200-215). Good idle quality. Low rpm torque and mid range performance. Will work with stock or slightly modified engine. Manual or auto transmission. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.
Condition: New

Title Engine Camshaft
Lifter Type Solid
Exhaust Duration at .050 inch Lift 214
Intake Duration at .050 Inch Lift 204
Advertised Exhaust Duration 292
Advertised Intake Duration 282

Shipping Options:
Ground
This Part Fits: Catalog: C
Vehicle Engine
1978 Ford Bronco 6.6L V8 VIN: S 
1978 Ford Bronco 5.8L V8 VIN: H Modified 

Melling Camshaft
Melling logo
Melling Camshaft
Click to Enlarge
(Read reviews)
Our List Price: $79.98
(7) In Stock
Part Number: 4953-07920700
Notes: Stock -- OE Stock Replacement Grind
Features:
  • Melling offers a full line of OE replacement camshafts for cars, light duty, medium duty and heavy duty trucks. Melling listings include OEM applications to match the engine requirements desired including horsepower, economy and needed engine torque. Melling stock replacement camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.
Condition: New

Title Engine Camshaft
Lifter Type Hydraulic
Exhaust Duration at .050 inch Lift 198
Intake Duration at .050 Inch Lift 192
Advertised Exhaust Duration 291
Advertised Intake Duration 272

Shipping Options:
Ground
This Part Fits: Catalog: C
Vehicle Engine
1978 Ford Bronco 6.6L V8 VIN: S 
1978 Ford Bronco 5.8L V8 VIN: H Modified 

Competition Cams Camshaft Kit
Our List Price: $348.98

Out of Stock
Part Number: 4953-03889445
Notes: Engine Camshaft Kit -- High Energy Camshaft Kit; Hyd Flat Tappet; 1500-5500rpm; Adv.Dur. 268 Int. / Exh.; V.Lift .494 Int. / Exh.; Lobe 110 deg; Incl.Cam; Lifter; V.Sprng / Ret. / Lock / Seal; Timing Set; Not Legal For Sale Or Use On Pollution-Controlled Motor Vehicle
Features:
  • High Torque Cams
  • For Street Applications w/Lower Compression Ratios
  • Can Be Used w/Most Stock Components
  • 1 Year Limited Warranty
Condition: New

Shipping Options:
Ground
This Part Fits: Catalog: F
Vehicle Engine
1978 Ford Bronco 5.8L V8 
1978 Ford Bronco 6.6L V8 

Competition Cams Camshaft and Lifter Kit
Competition Cams logo
Competition Cams Camshaft and Lifter Kit
Click to Enlarge
(Read reviews)
Our List Price: $231.98

Out of Stock
Part Number: 4953-03307365
Notes: Engine Camshaft and Lifter Kit -- High Energy Camshaft / Lifter Kit; Hyd Flat Tappet; 1500-5500rpm; Adv.Dur. 268 Int. / Exh.; V.Lift .494 Int. / Exh.; Lobe 110 deg.; Incl. Cam / Lifters; Stock Springs Cannot Be Used~ Not Legal For Sale Or Use On Pollution-Controlled Motor Vehicle
Features:
  • High Torque Cams
  • For Street Applications w/Lower Compression Ratios
  • Can Be Used w/Most Stock Components
  • 1 Year Limited Warranty
Condition: New

Shipping Options:
Ground
This Part Fits: Catalog: F
Vehicle Engine
1978 Ford Bronco 5.8L V8 
1978 Ford Bronco 6.6L V8 

Edelbrock Camshaft and Lifter Kit
Edelbrock logo
Edelbrock Camshaft and Lifter Kit
Click to Enlarge
Edelbrock Camshaft and Lifter Kit
Click to Enlarge
(Read reviews)
Our List Price: $248.95

Out of Stock
Part Number: 4953-03133901
Notes: Performer-Plus Camshaft Kit -- Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int / Exh 204 / 214 Deg.; Lift at Valve Int / Exh. 0.484 / 0.510 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle; Designed For The Engine Swap Market~Idle Vacuum at 1000 RPM - 14 inch~Not Legal For Use On Pollution Controlled Vehicles~Produces 390 ft.-lbs. When Matched With 2171 Intake and Stock Heads
Features:
  • Major Improvement in Throttle Response and Torque
  • Maximum Performance From Idle through Mid-Range
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Matched to Edelbrock Performer Intakes
  • Take the Guesswork Out of Camshaft Selection!
  • Includes Hydraulic Lifters and Assembly Lube
  • Designed for Optimum Torque and Acceleration
Condition: New

Engine Make/Size Ford 351M-400
Exh. Duration @ .050 in. (Deg) 214
Exh. Duration Advertised (Deg) 292
Exhaust Valve Lift 0.510 in.
Intake Duration @ 0.050 in. 204 Degree
Intake Duration Advertised 282
Intake Valve Lift 0.484 in.
Lifter Type Hydraulic Flat Tappet
RPM Range 0-6750
Usage Street/Performance

Shipping Options:
Ground

Installation Instructions:
  • Installation Instructions PDF - [1]
  • This Part Fits: Catalog: F
    Vehicle Engine
    1978 Ford Bronco 6.6L V8 
    1978 Ford Bronco 5.8L V8 Modified 

    Melling Camshaft
    Melling logo
    Melling Camshaft
    Click to Enlarge
    (Read reviews)
    Our List Price: $104.98

    Out of Stock
    Part Number: 4953-07531914
    Notes: Performance -- Class 1, Good Idle With Low RPM Torque And Mid Range Performance; Advertised Intake Duration 284; Advertised Exhaust Duration 284; Hydraulic Camshaft
    Features:
    • High Performance Camshaft
    • Class I camshaft (200-215). Good idle quality. Low rpm torque and mid range performance. Will work with stock or slightly modified engine. Manual or auto transmission. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.
    Condition: New

    Lifter Type Hydraulic
    Exhaust Valve Lift 0.485 in
    Intake Valve Lift 0.485 in
    Exhaust Duration at .050 inch Lift 208 deg
    Intake Duration at .050 Inch Lift 208 deg
    Advertised Exhaust Duration 284 deg
    Advertised Intake Duration 284 deg
    Basic Operating RPM Range 2500 RPM
    Cam Type Hydraulic Flat Tappet
    Computer Controlled Compatible No
    Exhaust Valve Lift with Factory Rocker Arm Ratio .839 in
    Intake Valve Lift with Factory Rocker Arm Ratio .839 in
    Lobe Separation 111 deg

    Shipping Options:
    Ground
    This Part Fits: Catalog: C
    Vehicle Engine
    1978 Ford Bronco 6.6L V8 
    1978 Ford Bronco 5.8L V8 VIN: H Modified 

    Melling Camshaft
    Melling logo
    Melling Camshaft
    Click to Enlarge
    (Read reviews)
    Our List Price: $109.98

    Out of Stock
    Part Number: 4953-07667127
    Notes: Performance -- Class 2, Fair Idle With Good Low To Mid Range Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 292; Advertised Exhaust Duration 302; Hydraulic Camshaft
    Features:
    • High Performance Camshaft
    • Class II camshaft (215-230). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.
    Condition: New

    Lifter Type Hydraulic
    Exhaust Valve Lift 0.537 in
    Intake Valve Lift 0.511 in
    Exhaust Duration at .050 inch Lift 224 deg
    Intake Duration at .050 Inch Lift 214 deg
    Advertised Exhaust Duration 302 deg
    Advertised Intake Duration 292 deg
    Basic Operating RPM Range 2800 RPM
    Cam Type Hydraulic Flat Tappet
    Computer Controlled Compatible No
    Exhaust Valve Lift with Factory Rocker Arm Ratio .929 in
    Intake Valve Lift with Factory Rocker Arm Ratio .884 in
    Lobe Separation 112 deg

    Shipping Options:
    Ground
    This Part Fits: Catalog: C
    Vehicle Engine
    1978 Ford Bronco 6.6L V8 
    1978 Ford Bronco 5.8L V8 VIN: H Modified 

    Melling Camshaft
    Melling logo
    Melling Camshaft
    Click to Enlarge
    (Read reviews)
    Our List Price: $121.98

    Out of Stock
    Part Number: 4953-07798105
    Notes: Performance -- Class 2, Fair Idle With Good Low To Mid Range Torque And Horsepower; Lower Engine Vacuum Than Stock; Advertised Intake Duration 310; Advertised Exhaust Duration 310; Hydraulic Camshaft
    Features:
    • High Performance Camshaft
    • Class II camshaft (215-230). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.
    Condition: New

    Lifter Type Hydraulic
    Exhaust Valve Lift 0.505 in
    Intake Valve Lift 0.505 in
    Exhaust Duration at .050 inch Lift 219 deg
    Intake Duration at .050 Inch Lift 219 deg
    Advertised Exhaust Duration 310 deg
    Advertised Intake Duration 310 deg
    Basic Operating RPM Range 3000 RPM
    Cam Type Hydraulic Flat Tappet
    Computer Controlled Compatible No
    Exhaust Valve Lift with Factory Rocker Arm Ratio .873 in
    Intake Valve Lift with Factory Rocker Arm Ratio .873 in
    Lobe Separation 114 deg

    Shipping Options:
    Ground
    This Part Fits: Catalog: C
    Vehicle Engine
    1978 Ford Bronco 6.6L V8 
    1978 Ford Bronco 5.8L V8 VIN: H Modified 

    Melling Camshaft
    Melling logo
    Melling Camshaft
    Click to Enlarge
    (Read reviews)
    Our List Price: $293.98
    with FREE Shipping

    Out of Stock
    Part Number: 4953-07598815
    Notes: Performance -- Class 2, Fair Idle With Good Low To Mid Range Torque And Horsepower; Lower Engine Vacuum Than Stock; For Use With Retro-Fit Roller Lifter F1900RF16; Advertised Intake Duration 285; Advertised Exhaust Duration 285; Hydraulic Camshaft
    Features:
    • High Performance Camshaft
    • Class II camshaft (215-230). Fair idle quality. Good low to mid range torque and horsepower. Will work with stock or modified engine. For use with manual or automatic transmission. Possibly lower vacuum than stock. Melling offers a full line of high performance camshafts for domestic cars, light trucks, import vehicles, marine and high performance engines. Melling offers specific high performance camshaft choices for street, RV, strip and circle track racing applications. Melling camshafts supply the performance to suit your horsepower and torque requirements wherever and whenever you want it. Melling high performance camshafts are developed, engineered, tested and manufactured with the highest standards of quality and materials.
    Condition: New

    Lifter Type Hydraulic Roller
    Exhaust Valve Lift 0.498 in
    Intake Valve Lift 0.498 in
    Exhaust Duration at .050 inch Lift 219 deg
    Intake Duration at .050 Inch Lift 219 deg
    Advertised Exhaust Duration 285 deg
    Advertised Intake Duration 285 deg
    Basic Operating RPM Range 3000 RPM
    Cam Type Hydraulic Roller
    Computer Controlled Compatible No
    Exhaust Valve Lift with Factory Rocker Arm Ratio .796 in
    Intake Valve Lift with Factory Rocker Arm Ratio .796 in
    Lobe Separation 110 deg

    Shipping Options:
    Free Ground Shipping
    This Part Fits: Catalog: C
    Vehicle Engine
    1978 Ford Bronco 5.8L V8 VIN: H Modified 



    Authorize.Net Merchant - Click to Verify
    comodo secure seal
    BROWSE Home View Cart Catalog Articles
    HELP Track Order Contact Us About Us Retrieve Quote Return Policy Cancellation Policy
    RESOURCES Affliate Program Shop By Make Models Brands
    SECURITY This site protected by Trustwave's Trusted Commerce program
    REVIEWS
    Payment method logos: paypal, mastercard, visa, american express, discover
    © Copyright 2020 PartsGeek® Providing discount auto parts online since 2008