1971 Ford Torino Camshaft

Part Number: 15307-03644704

Notes: Performer RPM Camshaft Kit; Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int / Exh 224 / 234 Deg.; Lift at Valve Int / Exh 0.496 / 0.520 in.; Lobe Seps 110 Deg.; Intake Center Line 106 Deg.;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

Detailed Notes: Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 400hp and 412ft.-lbs When Matched w / 7181 Intake and 60259 Heads

Features:

• 10 To 12 in. Of Manifold Vacuum At Idle
• Designed for 1500 to 6500 RPM Performance
• Dyno-Matched/Street-Proven Performance
• Includes Hydraulic Lifters and Assembly Lube
• Matched to Edelbrock Performer RPM Intakes
• Maximum Power in High-RPM with Good Low-End Torque
• More Lift And Duration Than Most Street Camshafts
• Take the Guesswork Out of Camshaft Selection!

Part Number: 15307-03644700

Notes: Performer RPM Camshaft Kit; Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int / Exh 224 / 234 Deg.; Lift at Valve Int / Exh 0.496 / 0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

Detailed Notes: Not For 1985 And Later Engines w / Roller Lifters~ Idle Vacuum at 1000 RPM - 11 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 367hp and 304ft.-lbs. When Matched w / 7121 Manifold and 60259 Heads~ Screw-In Studs / Guide Plates / Adj. Rocker Arms Required

Features:

• 10 To 12 in. Of Manifold Vacuum At Idle
• Designed for 1500 to 6500 RPM Performance
• Dyno-Matched/Street-Proven Performance
• Includes Hydraulic Lifters and Assembly Lube
• Matched to Edelbrock Performer RPM Intakes
• Maximum Power in High-RPM with Good Low-End Torque
• More Lift And Duration Than Most Street Camshafts
• Take the Guesswork Out of Camshaft Selection!

Part Number: 15307-03644703

Notes: Performer RPM Camshaft Kit; Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int / Exh 234 / 244 Deg.; Lift at Valve Int / Exh 0.556 / 0.581 in.; Lobe Seps 108 Deg.; Intake Center Line 103 Deg.;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

Detailed Notes: Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 506hp and 536 ft.-lbs. When Matched w / 7166 Intake and 60669 Heads

Features:

• 10 To 12 in. Of Manifold Vacuum At Idle
• Designed for 1500 to 6500 RPM Performance
• Dyno-Matched/Street-Proven Performance
• Includes Hydraulic Lifters and Assembly Lube
• Matched to Edelbrock Performer RPM Intakes
• Maximum Power in High-RPM with Good Low-End Torque
• More Lift And Duration Than Most Street Camshafts
• Take the Guesswork Out of Camshaft Selection!

Part Number: 15307-03133855

Notes: Performer-Plus Camshaft Kit; Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int / Exh 204 / 214 Deg.; Lift at Valve Int / Exh 0.448 / 0.472 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

Detailed Notes: Idle Vacuum at 1000 RPM - 16 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Produces 310hp and 260 ft.-lbs. When Matched w / 2121 Intake / 60329 Heads

Features:

• Designed for Optimum Torque and Acceleration
• Includes Hydraulic Lifters and Assembly Lube
• Major Improvement in Throttle Response and Torque
• Matched to Edelbrock Performer Intakes
• Maximum Performance From Idle through Mid-Range
• Take the Guesswork Out of Camshaft Selection!
• Use For Daily Drivers/Trucks/Vans/RVs/4x4s

Part Number: 15307-03133855

Notes: Performer-Plus Camshaft Kit; Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int / Exh 204 / 214 Deg.; Lift at Valve Int / Exh 0.448 / 0.472 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Not Legal For Sale Or Use On Vehicles Registered In CA

Detailed Notes: Idle Vacuum at 1000 RPM - 16 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Produces 310hp and 260 ft.-lbs. When Matched w / 2121 Intake / 60329 Heads

Features:

• Designed for Optimum Torque and Acceleration
• Includes Hydraulic Lifters and Assembly Lube
• Major Improvement in Throttle Response and Torque
• Matched to Edelbrock Performer Intakes
• Maximum Performance From Idle through Mid-Range
• Take the Guesswork Out of Camshaft Selection!
• Use For Daily Drivers/Trucks/Vans/RVs/4x4s

Part Number: 15307-03133942

Notes: Performer-Plus Camshaft Kit; Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int / Exh. 204 / 214 Deg.; Lift at Valve Int / Exh. 0.448 / 0.472 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

Detailed Notes: Idle Vacuum at 1000 RPM - 15 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 325 ft.-lbs. When Matched w / 2181 Intake and Stock Heads

Features:

• Designed for Optimum Torque and Acceleration
• Includes Hydraulic Lifters and Assembly Lube
• Major Improvement in Throttle Response and Torque
• Matched to Edelbrock Performer Intakes
• Maximum Performance From Idle through Mid-Range
• Take the Guesswork Out of Camshaft Selection!
• Use For Daily Drivers/Trucks/Vans/RVs/4x4s

Part Number: 15307-03133901

Notes: Performer-Plus Camshaft Kit; Off-Idle to 5500rpm; Adv. Dur. at 0.500 Int / Exh 204 / 214 Deg.; Lift at Valve Int / Exh. 0.484 / 0.510 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

Detailed Notes: Idle Vacuum at 1000 RPM - 14 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 390 ft.-lbs. When Matched w / 2171 Intake and Stock Heads

Features:

• Designed for Optimum Torque and Acceleration
• Includes Hydraulic Lifters and Assembly Lube
• Major Improvement in Throttle Response and Torque
• Matched to Edelbrock Performer Intakes
• Maximum Performance From Idle through Mid-Range
• Take the Guesswork Out of Camshaft Selection!
• Use For Daily Drivers/Trucks/Vans/RVs/4x4s

Part Number: 15307-03644694

Notes: Rollin Thunder Camshaft; Hyd Roller; 1500-5500rpm; Adv. Dur. at 0.050 Int / Exh 220 Deg.; Lift at Valve Int / Exh 0.498 in.; Lobe Seps 110 Deg.; Intake Center Line 110 Deg.;CARB E.O. D-215-14

Detailed Notes: May Use Original Hydraulic Roller Lifters~ Idle Vacuum - 13 inch~ 50 State Legal~ Match w / Performer Intake 3821 and Performer Heads 60379~ This Combo Produces 300hp and 325 ft.-lbs. of Torque

Features:

• Designed for Optimum Torque and Acceleration
• Includes Hydraulic Lifters and Assembly Lube
• Major Improvement in Throttle Response and Torque
• Matched to Edelbrock Performer Intakes
• Take the Guesswork Out of Camshaft Selection!
• Use For Daily Drivers/Trucks/Vans/RVs/4x4s
• Without Excessive Valve Overlap

Part Number: 15307-03643504

Notes: Rollin Thunder Camshaft; Hyd Roller; 1500-6500rpm; Adv Dur 299 Int / 302 Exh; Valve Lift 0.573 Int / 0.582Exh; Lobe Angle 112deg; Use Stock Ratio Rocker Arms Only

Detailed Notes: Engine Swaps~ Not Legal For Use On Pollution Controlled Vehicles

Features:

• 10 To 12 in. Of Manifold Vacuum At Idle
• Designed for 1500 to 6500 RPM Performance
• Dyno-Matched/Street-Proven Performance
• Extensive Dyno And Real World Tested
• Matched to Edelbrock Performer RPM Intakes
• More Lift And Duration Than Most Street Camshafts
• Take the Guesswork Out of Camshaft Selection!
• Use Only Stock Ratio Rocker Arms

Part Number: 15307-03644693

Notes: Rollin Thunder Camshaft; Hyd Roller; 1500-6500rpm; Adv Dur at 0.050 Int / Exh 227 / 234 Deg.; Lift at Valve Int / Exh 0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles

Detailed Notes: Idle Vacuum at 1000 RPM - 12 inch~ Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Match w / Pro-Flo 2 System 35210 and Performer PRM Heads 60255~ This Combo Produces 384hp and 347 ft.-lbs Of Torque

Features:

• 10 To 12 in. Of Manifold Vacuum At Idle
• Designed for 1500 to 6500 RPM Performance
• Dyno-Matched/Street-Proven Performance
• Matched to Edelbrock Performer RPM Intakes
• Maximum Power in High-RPM with Good Low-End Torque
• More Lift And Duration Than Most Street Camshafts
• Take the Guesswork Out of Camshaft Selection!
• Use Only Stock Ratio Rocker Arms

Part Number: 15307-03307433

Notes: High Energy Camshaft / Lifter Kit; Hyd Flat Tappet;1500-5500rpm;Adv.Dur. 268 Int. / Exh.;V.Lift .456 Int. / Exh.;Lobe 110 deg.;Incl. Cam / Lifters;Ford

Detailed Notes: Stock Springs Cannot Be Used~ Not Legal For Sale Or Use On Pollution-Controlled Motor Vehicle

Features:

• 1 Year Limited Warranty
• Can Be Used w/Most Stock Components
• For Street Applications w/Lower Compression Ratios
• High Torque Cams

Part Number: 15307-03307365

Notes: High Energy Camshaft / Lifter Kit; Hyd Flat Tappet;1500-5500rpm;Adv.Dur. 268 Int. / Exh.;V.Lift .494 Int. / Exh.;Lobe 110 deg.;Incl. Cam / Lifters

Detailed Notes: Stock Springs Cannot Be Used~ Not Legal For Sale Or Use On Pollution-Controlled Motor Vehicle

Features:

• 1 Year Limited Warranty
• Can Be Used w/Most Stock Components
• For Street Applications w/Lower Compression Ratios
• High Torque Cams

Part Number: 15307-03307859

Notes: Magnum Camshaft / Lifter Kit; Hyd Flat Tappet; 3000-6800rpm;Adv.Dur. 305 Int. / Exh.;V.Lift .585 Int. / Exh.;Lobe 110 deg; Incl. Cam; Lifters

Detailed Notes: Stock Springs Cannot Be Used~ Not Legal For Sale Or Use On Pollution-Controlled Motor Vehicle

Features:

• 1 Year Limited Warranty
• Cams Are Very Aggressive
• Deliver More Power Than Standard Camshafts
• Designed For Performance Oriented Vehicles

Part Number: 15307-03307427

Notes: Xtreme Energy Camshaft / Lifter Kit; Hyd Flat Tappet; 1600-5800rpm;Adv.Dur. 268 Int. / 280 Exh.;V.Lift .509 Int. / .512 Exh.;Lobe 110 deg;Incl. Cams;Lifters

Detailed Notes: Stock Springs Cannot Be Used~ Not Legal For Sale Or Use On Pollution-Controlled Motor Vehicle

Features:

• 1 Year Limited Warranty
• Delivers Increased Engine Vacuum
• Produces Better Throttle Response
• Produces Top Engine Horsepower

Part Number: 15307-05720085

Notes: Engine Camshaft -- Hydraulic; (050) Duration at .050 Lobe Lift; 195 exhaust; 195 intake; 108 Degrees Lobe Separation; Windsor

Part Number: 15307-05295197

Notes: Engine Camshaft -- Hydraulic; (050) Duration at .050 Lobe Lift; 198 exhaust; 192 intake; 110 Degrees Lobe Separation; Cleveland

Part Number: 15307-05306546

Notes: Engine Camshaft -- Hydraulic; (050) Duration at .050 Lobe Lift; 206 exhaust; 193 intake; 113 Degrees Lobe Separation

Part Number: 15307-05638420

Notes: Engine Camshaft -- Hydraulic; VINTAGE; (050) Duration at .050 Lobe Lift; 189 exhaust; 184 intake; 112 Degrees Lobe Separation

Part Number: 15307-07294753

Notes: Engine Camshaft -- Type: Performance Camshaft; 302 firing order; Pro-1500 Performance Cam; Hydraulic; (050) Duration at .050 Lobe Lift; 204 exhaust; 194 intake; 110 Degrees Lobe Separation

Part Number: 15307-07294753

Notes: Engine Camshaft -- Type: Performance Camshaft; 302 firing order; Pro-1500 Performance Cam; Hydraulic; (050) Duration at .050 Lobe Lift; 204 exhaust; 194 intake; 110 Degrees Lobe Separation; Windsor

Part Number: 15307-05756406

Notes: Engine Camshaft -- Type: Performance Camshaft; 351W firing order; Pro-2000 Performance Cam; Use With Hydraulic lifters; Hydraulic; (050) Duration at .050 Lobe Lift; 214 exhaust; 204 intake; 112 Degrees Lobe Separation

Part Number: 15307-05756406

Notes: Engine Camshaft -- Type: Performance Camshaft; 351W firing order; Pro-2000 Performance Cam; Use With Hydraulic lifters; Hydraulic; (050) Duration at .050 Lobe Lift; 214 exhaust; 204 intake; 112 Degrees Lobe Separation; Windsor

Part Number: 15307-05295193

Notes: Engine Camshaft -- Type: Performance Camshaft; 351W firing order; Pro-3000 Performance Cam; Use With Hydraulic lifters; Hydraulic; (050) Duration at .050 Lobe Lift; 224 exhaust; 214 intake; 112 Degrees Lobe Separation

Part Number: 15307-05295193

Notes: Engine Camshaft -- Type: Performance Camshaft; 351W firing order; Pro-3000 Performance Cam; Use With Hydraulic lifters; Hydraulic; (050) Duration at .050 Lobe Lift; 224 exhaust; 214 intake; 112 Degrees Lobe Separation; Windsor

Part Number: 15307-05692775

Notes: Engine Camshaft -- VINTAGE; Hydraulic; (050) Duration at .050 Lobe Lift; 221 exhaust; 206 intake; 115 Degrees Lobe Separation; Cleveland

Part Number: 15307-05692775

Notes: Engine Camshaft -- VINTAGE; Hydraulic; (050) Duration at .050 Lobe Lift; 221 exhaust; 206 intake; 115 Degrees Lobe Separation; Cleveland Boss

Part Number: 15307-05692775

Notes: Engine Camshaft -- VINTAGE; Hydraulic; (050) Duration at .050 Lobe Lift; 221 exhaust; 206 intake; 115 Degrees Lobe Separation; Cleveland Cobra Jet

Part Number: 15307-03307432

Notes: High Energy Camshaft / Lifter Kit; Hyd Flat Tappet;1200-5200rpm; 60H Grind;Adv.Dur. 260 Int. / Exh.;V.Lift .447 Int. / Exh.;Lobe 110 deg.;Incl. Cam / Lifters

Detailed Notes: Not Legal For Sale Or Use On Pollution-Controlled Motor Vehicle

Features:

• 1 Year Limited Warranty
• Can Be Used w/Most Stock Components
• For Street Applications w/Lower Compression Ratios
• High Torque Cams

Part Number: 15307-03133960

Notes: Performer-Plus Camshaft Kit; Off-Idle to 5500rpm; Adv. Dur. at 0.500 Int / Exh 194 / 204 Deg.; Lift at Valve Int / Exh 0.460 / 0.480 in.; Lobe Seps 110 Deg.; Intake Center Line 105 Deg.;Engines Transplanted Into Uncontrolled / Pre-Pollution Vehicle

Detailed Notes: Idle Vacuum at 1000 RPM - 15 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 455 ft.-lbs. When Matched w / 2166 Intake and Stock Heads

Features:

• Designed for Optimum Torque and Acceleration
• Includes Hydraulic Lifters and Assembly Lube
• Major Improvement in Throttle Response and Torque
• Matched to Edelbrock Performer Intakes
• Maximum Performance From Idle through Mid-Range
• Take the Guesswork Out of Camshaft Selection!
• Use For Daily Drivers/Trucks/Vans/RVs/4x4s