Hurry Save up to 80% Off Retail Prices! – Overnight and 2 Day Air Available!
Home >
Bosal Catalytic Converter
Get Custom Pricing Use the Dropdown Above to Browse Our Complete Catalog.
Replacement Catalytic Converter Information
Noxious emissions and poisonous pollutants are an unfortunate outcome of driving your vehicle. However, the amount of environmental damage from a single car was significantly greater prior to 1975. It was this year that the catalytic converter became a widely accepted component on new vehicle models. This innovative device significantly reduces the amount of hydrocarbons, carbon monoxide and nitrogen oxides. This is largely done through the process of oxidation, which breaks down these hazardous composites into harmless elements such as water and carbon dioxide. The conversion takes place just before the exhaust is expelled through the rear exhaust valve. While the device is not necessary for a car to run smoothly, city, state and federal laws have now passed emissions laws that require their use. As such, a faulty catalytic converter will result in a failed vehicle inspection and should be fixed as soon as possible. The component is placed somewhere along the exhaust valve, typically below the cabin of the vehicle. The most common damage to the part is a crack from hitting road debris. PartsGeek.com is your source for convenient online auto component shopping.
Choose from top brands including: Bosal, DEC, A & B, Dorman, OES Genuine, Miller and Ansa.
Shop Related Exhaust Converters Products
- Most Orders are Shipped the Same Day.
- U.S.A Based Only Sales Reps Call Toll Free
- Lowest Prices – Guaranteed!
- We Offer Real-Time Inventory Online Catalog.
- Low Price for Overnight & 2 Day Shipping.
- Buy With Confidence, Online Since 2002.
Shop Bosal Catalytic Converter Parts By Make

Click to Enlarge
|
Part Number: W0133-1603106
Notes: 49-state legal, OBDII compatible, not legal for sale or use in California. ** Replacement of Oxygen Sensors and Air Mass Flow Sensors Is Also Highly Recommended When Replacing Catalytic Converters **
Product Remark: Not Legal in California
Availability: In Stock
Shipping Options: Ground, Overnight, 2 Day
|
| This Product Fits the Following: |
|
| Vehicle |
Engine |
• 1997 Volkswagen Jetta |
Naturally Aspirated |
|
|
|

Image is not vehicle specific
|
Part Number: W0133-1739092
Notes: w/ exhaust manifold. 49-state legal, OBDII compatible, not legal for sale or use in California.
Product Remark: Not Legal in California
Position: Front Front
Availability: In Stock
Shipping Options: Ground, Overnight, 2 Day
|
| This Product Fits the Following: |
|
| Vehicle |
• 2003 Lexus IS300 |
|
|
|

Image is not vehicle specific
|
Part Number: W0133-1809311
Notes: 49-state legal, OBDII compatible, not legal for sale or use in California.
Product Remark: Not Legal in California
Position: Right
Availability: In Stock
Shipping Options: Ground, Overnight, 2 Day
|
| This Product Fits the Following: |
|
| Vehicle |
Sub Model |
• 1998 Mercedes E320 |
Base |
|
|
|

Image is not vehicle specific
|
Part Number: W0133-1695957
Notes: California Attaches to exhaust manifold. Non-California versions did not use a front catalytic converter.
Position: Front
Availability: In Stock
Shipping Options: Ground, Overnight, 2 Day
|
| This Product Fits the Following: |
|
| Vehicle |
Body |
Engine |
• 1994 Toyota Corolla |
AE101 Sedan |
1.6L 4 Cyl 4AFE |
|
|
|

Click to Enlarge
|
Part Number: W0133-1607059
Notes: With oxygen sensor hole. New CARB regulations that went into effect on January 1, 2009 now require all exhaust catalyst devices that are sold in California regardless of model year must meet the tougher OBD II emission standards that were introduced in the 1996 model year. Until further notice, this catalytic converter should not be used on vehicles registered in California. ** Replacement of Oxygen Sensors and Air Mass Flow Sensors Is Also Highly Recommended When Replacing Catalytic Converters **
Product Remark: Not Legal in California
Availability: In Stock
Shipping Options:Ground, Overnight, 2 Day
OEM
|
| This Product Fits the Following: |
|
| Vehicle |
• 1987 Volkswagen Vanagon |
|
|
|

Click to Enlarge
|
Part Number: W0133-1599742
Notes: We offer a choice of replacement exhaust manifold / catalytic converter assemblies for this application. The Miller unit may come in one of two versions depending on availability. For one version, the manifold section is made from tubular stainless steel; on the other version the manifold section is cast iron similar to OE. The cast iron version has provisions for reuse of the original heat shield. The stainless steel version does not require the original heat shield. 49-state legal, OBDII compatible, not legal for sale or use in California.
Product Remark: Not Legal in California
Availability: In Stock
Shipping Options: Ground, Overnight, 2 Day
|
| This Product Fits the Following: |
|
| Vehicle |
Sub Model |
• 2000 Honda Civic |
HX |
|
|
|

Image is not vehicle specific
|
Part Number: W0133-1847297
Notes: With pre-cat : New CARB regulations that went into effect on January 1, 2009 now require all exhaust catalyst devices that are sold in California regardless of model year must meet the tougher OBD II emission standards that were introduced in the 1996 model year. Until further notice, this catalytic converter should not be used on vehicles registered in California.
Product Remark: Not Legal in California
Position: Right
Availability: In Stock
Shipping Options: Ground, Overnight, 2 Day
|
| This Product Fits the Following: |
|
| Vehicle |
• 1983 Mercedes 380SL |
|
|
|

Image is not vehicle specific
|
Part Number: W0133-1647492
Notes: 944 Turbo Models up to 1986, Vin # GN1 50060 Require the following: 1)951 123 040 06 Exhaust Pipe 1)951 132 138 01 Flange 2)900 910 096 02 6mm Lock Nuts 2)900 074 234 02 M6x40 Hexagon Head Bolts New CARB regulations that went into effect on January 1, 2009 now require all exhaust catalyst devices that are sold in California regardless of model year must meet the tougher OBD II emission standards that were introduced in the 1996 model year. Until further notice, this catalytic converter should not be used on vehicles registered in California. ** Replacement of Oxygen Sensors and Air Mass Flow Sensors Is Also Highly Recommended When Replacing Catalytic Converters **
Product Remark: Not Legal in California
Availability: In Stock
Shipping Options: Ground, Overnight, 2 Day
|
| This Product Fits the Following: |
|
| Vehicle |
Sub Model |
• 1989 Porsche 944 |
Turbo |
|
|
|

Image is not vehicle specific
|
Part Number: W0133-1734456
Notes: AAH Engine New CARB regulations that went into effect on January 1, 2009 now require all exhaust catalyst devices that are sold in California regardless of model year must meet the tougher OBD II emission standards that were introduced in the 1996 model year. Until further notice, this catalytic converter should not be used on vehicles registered in California. ** Replacement of Oxygen Sensors and Air Mass Flow Sensors Is Also Highly Recommended When Replacing Catalytic Converters **
Product Remark: Not Legal in California
Position: Left
Availability: In Stock
Shipping Options: Ground, Overnight, 2 Day
|
| This Product Fits the Following: |
|
| Vehicle |
Engine |
Transmission |
• 1995 Audi 90 |
2.8L V6 |
Standard |
|
|
|

Image is not vehicle specific
|
Part Number: W0133-1651999
Notes: Front Y Pipe w/ Catalyst - Long Wheelbase 1 pc assembly - New CARB regulations that went into effect on January 1, 2009 now require all exhaust catalyst devices that are sold in California regardless of model year must meet the tougher OBD II emission standards that were introduced in the 1996 model year. Until further notice, this catalytic converter should not be used on vehicles registered in California. ** Replacement of Oxygen Sensors and Air Mass Flow Sensors Is Also Highly Recommended When Replacing Catalytic Converters **
Product Remark: Not Legal in California
Availability: In Stock
Shipping Options: Ground, Overnight, 2 Day
|
| This Product Fits the Following: |
|
| Vehicle |
• 1993 Land Rover Range Rover |
|
|
|


Click to Enlarge
|
Part Number: 29036-03021010
Notes: Stainless Steel Cat-Back; Off Road Use Only;
Features:
100% All Stainless Steel
Dyno Tested And Proven To Make Power
Easy To Install
Great Sound -Has A Smooth; Deep Tone
Lifetime Warranty
Mandrel-Bent. All Welded. Built To Last.
Performance Gains In Horsepower And Torque
Visit www.magnaflow.com
Availability: In Stock
Shipping Options: Free Ground Shipping
|
| This Product Fits the Following: |
Catalog: Performance |
| Vehicle |
Sub Model |
Engine |
• 2008 Dodge Magnum |
SRT8 |
6.1L V8 VIN: 3 FI Naturally Aspirated GAS |
|
|
|
Related Top Sellers
Popular Pages
Some of our Customer Reviews
Very Satisfied
Reviewer: Jeff Shaw
9/30/09 03:06 PMGreat "shopping" experience...Exceeded my expectations. The BMW hubcap center I ordered was agressively priced. I expected to receive the part several days from the time I placed the order.To my su...
Order Date | 9/23/09
Very Satisfied
Reviewer: Phildini
7/9/09 08:49 PMParts Geek is awesome to deal with - quality products, fast shipping, very satisfied !
Order Date | 7/1/09