Honda Passport Parts

Notes: Production: 08/2000-06/2001, In-Tank Assembly The gasket between the pump assembly and the fuel tank is NOT included (order separately if needed). The Delphi version of this pump assembly is a later OE design that does not require an external strainer at the bottom of the pump. Also note that this application may need to have the ECU reset in order for the replacement pump to operate correctly. Please refer to an authorized repair manual or your local dealer for more details.

Detailed Notes: The gasket between the pump assembly and the fuel tank is NOT included (order separately if needed). This pump assembly is a later OE design that does not require an external strainer at the bottom of the pump. Also note that this application may need to have the ECU reset in order for the replacement pump to operate correctly. Please refer to an authorized repair manual or your local dealer for more details.

Notes: Production: -04/1995, Front Door

Notes: w/o Motor

Notes: T-belt = 8-97191-036-1; T-belt tensioner = 8-97136-256-0; T-belt idler = 8-97146-877-0; tensioner pushrod assembly not included (order separately).

Notes: Shaft Assembly only - Less Arm The OE service version of this part includes just the shaft assembly that bolts to the frame. It does NOT include the arm that connects this shaft assembly with the center steering link. Please order the connecting arm separately if needed.

Notes: Production: 11/1993-, Barrel Assembly - Inc. Keys

Notes: Production: 07/1997-

Notes: This lamp assembly does not include the parking/sidemarker lamp (order separately).

Notes: Production: 07/1997-, The following gaskets are not included with this gasket set (please order separately as needed): 1-09623-130-0 heater inlet pipe o-ring (1 per engine), 8-97102-031-1 exhaust flange gasket (2), 8-97149-002-2 valve cover sealing washer (16), 8-97149-338-0 cam plug (8), 8-97254-448-0 plenum gasket (1).

Notes: NGK PFR5G-11 - OE = Platinum If using Bosch spark plugs for this application, note that Bosch recommends using only #4419 (Platinum+4), 4312 (Platinum2), 4202 (Platinum), or 7557 (Super).

Notes: Harmonic Balancer

Notes: Production: 11/1993-

Notes: Exhaust -Secondary Arm "C" - At Valve - 6 per Engine This arm is on the lower rocker shaft, between the primary rocker arm and the exhaust valve. It actuates the rear exhaust valve in each cylinder of the left head and the front exhaust valve in each cylinder of the right head (position "C" in the OE parts info). The hydraulic valve lash adjuster (the "lifter") is built into this arm. Some customers have reported that Mazda cam follower JFY1-12-100 can be used to replace the hydraulic element of this rocker arm. Our supplier for the Mazda cam follower does not reference this Isuzu application, so this info is advisory only. Anyone wishing to use the Mazda cam follower for this Isuzu application should proceed at their own risk.

Notes: Production: 11/1993-, Assembly - w/ Bearing

Notes: Front Bar

Notes: black

Notes: Power, Foldable, Chrome

Notes: 3.2L 6 cyl, From 11/92