2012 Jeep Wrangler Suspension Kit

Part Number: 118666-03209968

Notes: Black; Incl. Fr / Rr Upper Suspension Arm; Articulation Bushing Kit; Rod End Kit;

Detailed Notes: Before Installation Check Alignment And Frame At State Approved Facility~ Alignment Must Be Within Factory Specifications; Frame Must Be Sound~ Do Not Weld Anything To These Componets~ Do Not Weld Components To Veh Unless Specifically Stated In Instructions~ During High Articulation Events Fr Drivesaft May Contact Trans Oil Pan~ Smaller Diameter Driveshaft Is Suggested For Optiomal Performance

Features:

• 100 Percent Bolt On System
• Available In Black Or Red
• Constructed From High Strength/Low Alloy Steel

Part Number: 118666-03209969

Notes: Black; Incl. Fr / Rr Upper Suspension Arm; Fr / Rr Lower Suspension Arm; Rod End Kit; Artiulation Bushing Kit;

Detailed Notes: Before Installation Check Alignment And Frame At State Approved Facility~ Alignment Must Be Within Factory Specifications; Frame Must Be Sound~ Do Not Weld Anything To These Componets~ Do Not Weld Components To Veh Unless Specifically Stated In Instructions~ During High Articulation Events Fr Drivesaft May Contact Trans Oil Pan~ Smaller Diameter Driveshaft Is Suggested For Optiomal Performance

Features:

• 100 Percent Bolt On System
• Available In Black Or Red
• Constructed From High Strength/Low Alloy Steel

Part Number: 118666-03209974

Notes: Steel; Incl. Fr / Rr Upper Suspension Arm; Articulation Bushing Kit; Rod End Kit;

Detailed Notes: Before Installation Check Alignment And Frame At State Approved Facility~ Alignment Must Be Within Factory Specifications; Frame Must Be Sound~ Do Not Weld Anything To These Componets~ Do Not Weld Components To Veh Unless Specifically Stated In Instructions~ During High Articulation Events Fr Drivesaft May Contact Trans Oil Pan~ Smaller Diameter Driveshaft Is Suggested For Optiomal Performance

Features:

• 100 Percent Bolt On System
• Available In Black Or Red
• Constructed From High Strength/Low Alloy Steel

Part Number: 118666-03209975

Notes: Steel; Incl. Fr / Rr Upper Suspension Arm; Fr / Rr Lower Suspension Arm; Rod End Kit; Artiulation Bushing Kit;

Detailed Notes: Before Installation Check Alignment And Frame At State Approved Facility~ Alignment Must Be Within Factory Specifications; Frame Must Be Sound~ Do Not Weld Anything To These Componets~ Do Not Weld Components To Veh Unless Specifically Stated In Instructions~ During High Articulation Events Fr Drivesaft May Contact Trans Oil Pan~ Smaller Diameter Driveshaft Is Suggested For Optiomal Performance

Features:

• 100 Percent Bolt On System
• Available In Black Or Red
• Constructed From High Strength/Low Alloy Steel