Notes: Before Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle.

Notes: After Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle.

Notes: Chas: -342000, After Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. After Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle.

Notes: Before Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle.

Detailed Notes: The submersible Bosch patented* connection system has undergone rigorous quality testing to USCAR standards. Tests have proven that this watertight system protects against contaminaiton and withstands the effects of extreme temperatures and engine vibration. User friendly instructions, No special tools are required to install. Just strip wires & go! Specially designed heat resistant - Posi-Lock connectors can easily be taken apart and recon- nected in case of wiring mistake.

Notes: Chas: 342001-, After Catalyst According to Volvo Cars of North America, Inc., in order to prevent contamination from reaching the probe's reference air, new routing has been developed for sensor wiring. If one oxygen sensor is replaced, the new Oxygen Sensor Cable must be installed for both sensors. new Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. new Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715.

Notes: Chas: 342001-, After Catalyst According to Volvo Cars of North America, Inc., in order to prevent contamination from reaching the probe's reference air, new routing has been developed for sensor wiring. If one oxygen sensor is replaced, the new Oxygen Sensor Cable must be installed for both sensors. new Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. new Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715.

Notes: Before Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle.

Notes: Chas: 342001-, After Catalyst According to Volvo Cars of North America, Inc., in order to prevent contamination from reaching the probe's reference air, new routing has been developed for sensor wiring. If one oxygen sensor is replaced, the new Oxygen Sensor Cable must be installed for both sensors. new Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. new Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715.

Notes: After Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle.

Notes: Chas: 342001-, After Catalyst According to Volvo Cars of North America, Inc., in order to prevent contamination from reaching the probe's reference air, new routing has been developed for sensor wiring. If one oxygen sensor is replaced, the new Oxygen Sensor Cable must be installed for both sensors. new Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. new Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715.

Notes: Chas: -342000, After Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. After Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle.