Notes: Front Suspension - For Stay - Diagonal Arm Some cars may have had the control arm stays replaced with stay #6819079. This stay is 388.5mm in length and is a service replacement used to help reduce brake vibration. The inner bushing on stay #6819079 is an integral part of the stay and is not replaceable separately.

Notes: Front Suspension - Outer Bushing - From stay to Control Arm - 2 per Wheel This bushing is used on vehicles with factory original control arm stays. Depending on model and wheel size, these control arm stays can be of the following lengths: 385mm, 390.5mm, or 396mm. Stays that are 388.5mm in length are replacements with a special inner bushing designed to reduce brake vibration. Cars with 388.5mm stays should use outer bushing #6819057 instead. In addition, if the inner bushings on the suspension (bushing #1273235 for the control arm plus bushing #1329655 for the control arm stay) show any ANY signs of wear, they MUST be replaced at the same time. Otherwise, premature failure of the outer bushings can result, which IS NOT covered under warranty!

Notes: Front Suspension - Outer Bushing - From stay to Control Arm - 2 per Wheel This bushing is used on vehicles with factory original control arm stays. Depending on model and wheel size, these control arm stays can be of the following lengths: 385mm, 390.5mm, or 396mm. Stays that are 388.5mm in length are replacements with a special inner bushing designed to reduce brake vibration. Cars with 388.5mm stays should use outer bushing #6819057 instead. In addition, if the inner bushings on the suspension (bushing #1273235 for the control arm plus bushing #1329655 for the control arm stay) show any ANY signs of wear, they MUST be replaced at the same time. Otherwise, premature failure of the outer bushings can result, which IS NOT covered under warranty!

Notes: Front Suspension - Outer Bushing - From stay to Control Arm - 2 per Wheel This bushing is used on vehicles with factory original control arm stays. Depending on model and wheel size, these control arm stays can be of the following lengths: 385mm, 390.5mm, or 396mm. Stays that are 388.5mm in length are replacements with a special inner bushing designed to reduce brake vibration. Cars with 388.5mm stays should use outer bushing #6819057 instead. In addition, if the inner bushings on the suspension (bushing #1273235 for the control arm plus bushing #1329655 for the control arm stay) show any ANY signs of wear, they MUST be replaced at the same time. Otherwise, premature failure of the outer bushings can result, which IS NOT covered under warranty!

Notes: Front Suspension - Outer Bushing - From stay to Control Arm - 2 per Wheel This bushing is used on vehicles with factory original control arm stays. Depending on model and wheel size, these control arm stays can be of the following lengths: 385mm, 390.5mm, or 396mm. Stays that are 388.5mm in length are replacements with a special inner bushing designed to reduce brake vibration. Cars with 388.5mm stays should use outer bushing #6819057 instead. In addition, if the inner bushings on the suspension (bushing #1273235 for the control arm plus bushing #1329655 for the control arm stay) show any ANY signs of wear, they MUST be replaced at the same time. Otherwise, premature failure of the outer bushings can result, which IS NOT covered under warranty!

Notes: Front Suspension - For Stay - Diagonal Arm Some cars may have had the control arm stays replaced with stay #6819079. This stay is 388.5mm in length and is a service replacement used to help reduce brake vibration. The inner bushing on stay #6819079 is an integral part of the stay and is not replaceable separately.